Product Type: PHONE JACK (DIP)
Series: Z /4271
Model/Type: 6.35mm (1/4 inch) Stereo Phone Jack
Manufacturer: HAOYU (HONG KONG) LIMITED
Date: 2008-07-23
| Item | Description | Conditions | Specifications | Unit |
|---|---|---|---|---|
| 1 - RATING | Electrical Rating | DC | 30V / 0.5A | |
| 2 - OPERATING TEMPERATURE RANGE | Operating Temperature | -20 to 70 | C | |
| Preservative Temperature | -15 to 35 | C | ||
| 3 - ELECTRICAL PERFORMANCE | Contact Resistance | DC 5V, 0.1A (Average of 3 successive measurements) | < 50 | m max |
| Insulation Resistance | DC 250V, 1 min | > 100 | M min | |
| Dielectric Strength | AC 250V, 1 min | Without damage, arcing, or breakdown | ||
| 4 - MECHANICAL PERFORMANCE | Insertion and Extraction Force | Across spring piece and matching plug | 3 - 30 | N |
| Terminal Strength | Static load of 10 N (1000gf) applied to tip for 60 sec in any direction | Without damage or excessive looseness | ||
| STANDARD ATMOSPHERIC CONDITIONS | Ambient Temperature | For measurements and tests | 15 to 35 | C |
| Relative Humidity | For measurements and tests | 25 to 75 | %RH | |
| Air Pressure | For measurements and tests | 80 to 106 | Kpa |
| Item | Description | Conditions | Specifications | Unit |
|---|---|---|---|---|
| 5 - DURABILITY | Life Test | 5000 cycles at a speed of 30 cycles/min | Electrical characteristics shall be satisfied. | Cycles |
| Soldering Heat Test (Wave) | Within 3 seconds at 260 5C | Electrical characteristics shall be satisfied. | C | |
| Soldering Heat Test (Hand) | Within 3 seconds at 380C | Electrical characteristics shall be satisfied. | C | |
| Heat Test | 852C for 96 hours, then keep in normal condition for 60 minutes | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. | ||
| Humidity Test | 402C, 90-96%RH for 96 hours, then keep in normal condition for 60 minutes | Mechanical and electrical characteristics shall be satisfied. | ||
| Cold Test | -253C for 96 hours, then keep in normal condition for 60 minutes | Mechanical and electrical characteristics shall be satisfied. | C | |
| Salt Spray Test | 5% NaCl liquor for 24 hours, then wash | Without excessive corrosion or crack in appearance. |
| Part Name | Material | Finishing | Quantity |
|---|---|---|---|
| WASHER | PA66 | Ag PLATED | 2 |
| LOCATING PLATE | BRASS | Ag PLATED | 1 |
| TERMINAL | BRASS | Ag PLATED | 2 |
| CASE | PA66 | 1 | |
| GASKET | 1 | ||
| BLACK | PA66 | 2 | |
| BLACK | PA66 | 2 | |
| Ag PLATED | BRASS | 1 | |
| Ag PLATED | BRASS | 1 | |
| Ag PLATED | BRASS | 2 |
