The PJ-603A (IR) is a 6.35mm phone jack with DIP termination, designed for various electronic applications. It offers reliable performance within specific operating and preservation temperature ranges.
HAOYU (HONG KONG) LIMITED
ZA5
ZEamilss
2008-07-23
| Item | Description | Specifications |
|---|---|---|
| 1 - RATING | Rating | DC30V 0.5A |
| 2 - OPERATING TEMPERATURE RANGE | Operating Temperature | -20C~70C |
| Preservative Temperature | 15C~35C | |
| 3 - ELECTRICAL PERFORMANCE | Contact Resistance | 70m max (at 0.1A DC5V) |
| Insulation Resistance | 100M min (between terminals and frame at 250V DC for 1 min) | |
| Dielectric Strength | 250V AC for 1 min (between terminals and frame, without arcing or breakdown) | |
| 4 - MECHANICAL PERFORMANCE | Insertion and Withdrawal Force | 3-40N |
| Terminal Strength | 10N (1000gf) for 60 sec. (without damage or excessive looseness) | |
| STANDARD ATMOSPHERIC CONDITIONS | Ambient Temperature | 15C to 35C |
| Relative Humidity | 25% to 75%RH | |
| Air Pressure | 80Kpa to 106Kpa |
| Item | Description | Conditions | Specifications |
|---|---|---|---|
| 5 - DURABILITY | Life Test | Actuator subjected to 5000 cycles at a speed of 30 cycles/min | Electrical Characteristics shall be satisfied. Contact Resistance: 200m max. |
| Heat Test | 852C for 48 hours, then kept in normal condition for 30 minutes | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. | |
| Humidity Test | 402C 90-96%RH for 48 hours, then kept in normal condition for 30 minutes | Appearance, mechanical and electrical characteristics shall be satisfied. | |
| Cold Test | -402C for 48 hours, then kept in normal condition for 30 minutes | No damage or excessive looseness. | |
| Salt Spray Test | 5% NaCl liquor for 24 hours, then washed and kept in normal condition for 30 minutes | Without excessive corrosion or crack in appearance. | |
| Soldering | Wave Soldering | Within 3 seconds at 260 5C | No deformation of case, resistance or terminals. |
| Hand Welding | Within 3 seconds at 380C | Electrical characteristics shall be satisfied. |
