Product Type: 6.35 PHONE JACK (DIP)
Series: LT
Model: PJ-625DK
Description: A 6.35mm phone jack with DIP termination, designed for various audio and electronic applications.
| Item | Description | Conditions | Specifications |
|---|---|---|---|
| 1 | RATING | DC50V 1A | |
| 2 | OPERATING TEMPERATURE RANGE | PRESERVATIVE TEMPERATURE RANGE | -20C ~ 70C | -15C ~ 35C |
| 3A | DIELECTRIC STRENGTH | BETWEEN TERMINALS | 250V AC for 1 min. (no arcing or breakdown) |
| 3A | DIELECTRIC STRENGTH | BETWEEN INDIVIDUAL TERMINALS AND FRAME | 250V AC for 1 min. (no arcing or breakdown) |
| 3B | INSULATION RESISTANCE | BETWEEN TERMINALS | 100M at 250V DC |
| 3B | INSULATION RESISTANCE | BETWEEN INDIVIDUAL TERMINALS AND FRAME | 100M at 250V DC |
| 3C | CONTACT RESISTANCE | METER AT 0.1A DC5V | 70m max. (average of 5 successive measurements) |
| 4A | INSERTION AND WITHDRAW FORCE | 3-40N | |
| 4B | STRENGTH | APPLIED TO THE TIP OF THE TERMINALS FOR 60 SEC. IN ANY DIRECTION OF ACTUATOR | 10N (1000gf) static load (without damage or excessive looseness) |
| 5A | SOLDERING | Wave-soldering | 3 seconds at 260 5C |
| 5A | SOLDERING | Hand welding | 3 seconds at 380C or below |
| 5B | LIFE TEST | ACTUATOR SUBJECT TO CYCLES | 5000 cycles at a speed of 30 cycles/min. Electrical characteristics shall be satisfied. |
| 5 | HEAT TEST | AFTER 852C FOR 48 HOURS, KEEP IN NORMAL CONDITION FOR 30 MINUTES. | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. |
| 5 | HUMIDITY TEST | 402C 90-96%RH FOR 48 HOURS, TEST AFTER KEEPING IN NORMAL CONDITION FOR 30 MIN. | Mechanical and electrical characteristics shall be satisfied. |
| 5 | COLD TEST | AT -402C FOR 48 HRS. AFTER TEST KEEP IN NORMAL CONDITION FOR 30 MIN. | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. |
| 5 | SALT SPRAY TEST | AT 5% NaCl LIQUOR FOR 24 HOURS, AFTER WASHING, KEEP IN NORMAL CONDITION FOR 30 MIN. | No corrosion. Mechanical and electrical characteristics shall be satisfied. |
| Atmospheric Conditions | Temperature | Relative Humidity | Air Pressure |
|---|---|---|---|
| STANDARD CONDITIONS FOR MEASUREMENTS AND TESTS | 15C to 35C | 25% to 75% RH | 80Kpa to 106Kpa |
| Part | Material | QTY | Finishing |
|---|---|---|---|
| NUT | PA66 | 1 | BLACK |
| WASHER | PA66 | 2 | BLACK |
| LOCATING PLATE (2)(4)(6)# | PBS | 3 | Ag PLATED |
| LOCATING PLATE (3)(5)# | Ag PLATED | ||
| LOCATING PLATE (7)# | Ag PLATED | ||
| TERMINAL (7#) | BRASS | Ag PLATED | |
| TERMINAL (3#,5#) | Ag PLATED | ||
| SPRING (2#,4#,6#) | Ag PLATED | ||
| GASKET | 1 | BLACK |
