The HAOYU (HONG KONG) LIMITED PJ-626AK-P is a 6.35mm (1/4 inch) PHONE JACK (DIP) designed for various electronic applications. It offers reliable performance with specific electrical and mechanical characteristics suitable for demanding environments.
| Item | Description | Conditions | Specifications |
|---|---|---|---|
| 1 - RATING | DC Voltage / Current | - | 30V / 0.5A |
| 2 - OPERATING TEMPERATURE RANGE | Operating | - | -20C ~ 70C |
| Preservative | - | -15C ~ 35C | |
| 3 - ELECTRICAL PERFORMANCE | Contact Resistance | DC 5V, 0.1A (Average of 3 successive measurements) | 50m max |
| Insulation Resistance | DC 250V, 1 min (Between terminals and frame) | 100M min | |
| Dielectric Strength | AC 250V, 1 min (Between terminals and frame) | Without damage, arcing, or breakdown | |
| 4 - MECHANICAL PERFORMANCE | Insertion and Extraction Force | - | 3-30N |
| Terminal Strength | Static load of 10N (1000gf) applied to tip for 60 sec. in any direction | Without damage or excessive looseness | |
| STANDARD ATMOSPHERIC CONDITIONS | Ambient Temperature | - | 15C to 35C |
| Relative Humidity | - | 25% to 75% RH | |
| Air Pressure | - | 80Kpa to 106Kpa | |
| 5 - DURABILITY | Soldering Heat Test | Wave soldering: 260 5C, within 3 seconds. Hand welding: 380C max, within 3 seconds. | Electrical characteristics shall be satisfied. |
| Life Test | 5000 cycles at a speed of 30 cycles/min | Contact resistance 200m max. Mechanical and electrical characteristics shall be satisfied. | |
| Heat Test | 852C for 96 hours, then keep in normal condition for 60 minutes. | No damage on appearance, mechanical and electrical characteristics. | |
| Humidity Test | 402C, 90-96% RH for 96 hours, then keep in normal condition for 60 minutes. | No damage on appearance, mechanical and electrical characteristics. | |
| Cold Test | -253C for 96 hours, then keep in normal condition for 60 minutes. | No damage on appearance, mechanical and electrical characteristics. | |
| Salt Spray Test | 5% NaCl solution for 24 hours, then wash. | Without excessive corrosion or crack in appearance. |
| Part Name | Material | Plating | Quantity |
|---|---|---|---|
| PJ-626AK-P 2(2)(4)(6)#LOCATING PLATE | BRASS | Ag PLATED | 1 |
| PJ-626AK-P 2(3)(5)#LOCATING PLATE | BRASS | Ag PLATED | 1 |
| PJ-626AK-P 2(7)#LOCATING PLATE | BRASS | Ag PLATED | 1 |
| PJ-625DK 7#TERMINAL | BRASS | Ag PLATED | 1 |
| PJ-625DK 3#,5#TERMINAL | BRASS | Ag PLATED | 1 |
| PJ-625DK 2#,4#,6#SPRING | BRASS | Ag PLATED | 1 |
| PJ-626AK-P GASKET | PBS | - | 1 |
| PJ-625F CASE | PBS | BLACK | 1 |
| PAG6 1 | BRASS | Ag PLATED | 1 |
| PAG6 2 | BRASS | BLACK | 1 |
