The FH34 Series is a low-profile FPC/FFC connector featuring a 0.5mm pitch and 1.0mm height. It offers both top and bottom contact configurations, enhancing design flexibility. The back flip actuator and unique contact design significantly improve FPC retention force in both horizontal and vertical directions. The FH34D variant is compatible with FPC/FFC tabs, further increasing retention force. This series supports high-speed transmission, meeting eDP (ver 1.3) and MIPI (D-PHY) standards. It is designed for easy FPC/FFC insertion with tapered guides and is compatible with 0.3mm thick FPC/FFC. The connector allows for board design flexibility with no prohibited pattern area required on the lower surface. It is halogen-free and suitable for automatic pick & place mounting.
| Item | Specifications | Conditions |
| Rated Current | 0.5A (Note 1) | |
| Operating Temperature | -55 to +105 (Note 2) | |
| Rated Voltage | 50Vms AC/DC | |
| Storage Temperature | -10 to +50 (Note 3) | |
| Operating Humidity Range | RH 90% Max. (No Condensation) | |
| Storage Humidity Range | RH 90% Max. (No Condensation) (Note 3) | |
| Recommended FPC/FFC Specifications | t=0.3 0.03 | |
| Insulation Resistance | 500M Min. | Measured at 100V DC |
| Withstanding Voltage | No flashover or insulation breakdown | 250V AC for 1 min. |
| Contact Resistance | 100m Max. | Includes FPC/FFC conductor resistance. Measured at 1mA |
| Mating Durability | Contact Resistance: 100m Max. No damage, cracks or part dislocation. | 20 times |
| Vibration Resistance | No electrical discontinuity of 1 s Min. Contact Resistance: 100m Max. No damage, cracks or part dislocation. | Frequency: 10 to 55Hz, single amplitude of 0.75mm, 10 cycles in each of the 3 axis |
| Shock Resistance | No electrical discontinuity of 1 s Min. Contact Resistance: 100m Max. No damage, cracks or part dislocation. | Acceleration of 981m/s, 6ms duration, sine halfwave, 3 cycles in each of the 3 axis |
| Steady-state Moisture Resistance | Contact Resistance: 100m Max. Insulation Resistance: 50M Min. No damage, cracks or part dislocation. | 96 hours at temperature of 40 and humidity of 90 to 95% |
| Temperature Cycle | Contact Resistance: 100m Max. Insulation Resistance: 50M Min. No damage, cracks or part dislocation. | Temperature: -55 +15 to +35 +105 +15 to +35 Time: 30 2 to 3 30 2 to 3 minutes. Above conditions repeated for 5 cycles |
| Solder Heat Resistance | No deformation in appearance or significant damage to contacts. | Reflow: At recommended temperature profile. Hand Solder: Solder iron temperature of 350 10 for 5 1 seconds Max. |
FH34SRJ-30S-0.5SH(50)
Series Name: FH
Series No.: 34
Tab: SRJ (Incompatible with FPC/FFC Tabs), D (Compatible with FPC/FFC Tabs)
No. of Pos.: 4 to 50
Contact Pitch: 0.5mm
Termination Type: SH (SMT Horizontal Mounting Type)
Specification: (50) Standard (5,000pcs), (99) For Trial only (500pcs)
| Part. No. | No. of Pos. | A | B | C | D | Purchase Unit |
| FH34SRJ-4S-0.5SH(##) | 4 | 4.0 | 1.5 | 2.53 | 3.38 | 5,000pcs per reel / 500pcs per reel |
| FH34SRJ-5S-0.5SH(##) | 5 | 4.5 | 2.0 | 3.03 | 3.88 | |
| FH34SRJ-6S-0.5SH(##) | 6 | 5.0 | 2.5 | 3.53 | 4.38 | |
| FH34SRJ-7S-0.5SH(##) | 7 | 5.5 | 3.0 | 4.03 | 4.88 | |
| FH34SRJ-8S-0.5SH(##) | 8 | 6.0 | 3.5 | 4.53 | 5.38 | |
| FH34SRJ-9S-0.5SH(##) | 9 | 6.5 | 4.0 | 5.03 | 5.88 | |
| FH34SRJ-10S-0.5SH(##) | 10 | 7.0 | 4.5 | 5.53 | 6.38 | |
| FH34SRJ-11S-0.5SH(##) | 11 | 7.5 | 5.0 | 6.03 | 6.88 | |
| FH34SRJ-12S-0.5SH(##) | 12 | 8.0 | 5.5 | 6.53 | 7.38 | |
| FH34SRJ-14S-0.5SH(##) | 14 | 9.0 | 6.5 | 7.53 | 8.38 | |
| FH34SRJ-16S-0.5SH(##) | 16 | 10.0 | 7.5 | 8.57 | 9.38 | |
| FH34SRJ-18S-0.5SH(##) | 18 | 11.0 | 8.5 | 9.57 | 10.38 | |
| FH34SRJ-20S-0.5SH(##) | 20 | 12.0 | 9.5 | 10.57 | 11.38 | |
| FH34SRJ-22S-0.5SH(##) | 22 | 13.0 | 10.5 | 11.57 | 12.38 | |
| FH34SRJ-24S-0.5SH(##) | 24 | 14.0 | 11.5 | 12.57 | 13.38 | |
| FH34SRJ-26S-0.5SH(##) | 26 | 15.0 | 12.5 | 13.57 | 14.38 | |
| FH34SRJ-30S-0.5SH(##) | 30 | 17.0 | 14.5 | 15.57 | 16.38 | |
| FH34SRJ-32S-0.5SH(##) | 32 | 18.0 | 15.5 | 16.53 | 17.38 | |
| FH34SRJ-34S-0.5SH(##) | 34 | 19.0 | 16.5 | 17.53 | 18.38 | |
| FH34SRJ-40S-0.5SH(##) | 40 | 22.0 | 19.5 | 20.53 | 21.38 | |
| FH34SRJ-45S-0.5SH(##) | 45 | 24.5 | 22.0 | 23.03 | 23.88 | |
| FH34SRJ-50S-0.5SH(##) | 50 | 27.0 | 24.5 | 25.53 | 26.38 |
| Part. No. | No. of Pos. | A | B | C | D | Purchase Unit |
| FH34D-4S-0.5SH(##) | 4 | 5.0 | 2.5 | 3.53 | 4.38 | 5,000pcs per reel / 500pcs per reel |
| FH34D-6S-0.5SH(##) | 6 | 6.0 | 3.5 | 4.53 | 5.38 | |
| FH34D-8S-0.5SH(##) | 8 | 7.0 | 4.5 | 5.53 | 6.38 | |
| FH34D-10S-0.5SH(##) | 10 | 8.0 | 5.5 | 6.53 | 7.38 | |
| FH34D-12S-0.5SH(##) | 12 | 9.0 | 6.5 | 7.53 | 8.38 | |
| FH34D-14S-0.5SH(##) | 14 | 10.0 | 7.5 | 8.57 | 9.38 | |
| FH34D-16S-0.5SH(##) | 16 | 11.0 | 8.5 | 9.57 | 10.38 | |
| FH34D-20S-0.5SH(##) | 20 | 13.0 | 10.5 | 11.57 | 12.38 | |
| FH34D-24S-0.5SH(##) | 24 | 15.0 | 12.5 | 13.57 | 14.38 | |
| FH34D-30S-0.5SH(##) | 30 | 18.0 | 15.5 | 16.53 | 17.38 |
