The FH12 Series connectors offer a rotating one-touch ZIF mechanism for easy operation and a clear tactile click upon successful mating. Designed for high-density mounting, these connectors require less space than slide locking types and can be mounted in the center of the PCB. Available in top contact, bottom contact, and vertical mount configurations, with both 0.5mm and 1mm pitch options. The FH12S version features a reinforced actuator for added security against breakage in specific pin counts.
| Parameter | Specification | Conditions |
|---|---|---|
| Current Rating | 0.5A DC (Note 1) | Use 70% of current rating when passing current through all contacts. |
| Voltage Rating | 50V AC | |
| Operating Temperature Range | -40 to +85C (Note 2) | Includes temperature rise caused by current flow. |
| Storage Temperature Range | -10 to +50C (Note 3) | Refers to products stored prior to mounting and use. |
| Operating Humidity Range | Relative humidity, 90% max. | (Not dewed) |
| Storage Humidity Range | Relative humidity, 90% max. | (Not dewed) |
| Adaptive FPC/FFC Contact | t=0.30.05 | Gold plated |
| Insulation Resistance | 500M minimum | 100V DC |
| Withstanding Voltage | No flashover or insulation breakdown. | 150V AC/1 minute |
| Contact Resistance | 50m maximum | 1mA |
| Durability (Insertion/withdrawal) | Contact resistance: 50m maximum. No damage, cracks, or parts dislocation. No electrical discontinuity of 1s or more. | 20 cycles |
| Vibration | Contact resistance: 50m maximum. No damage, cracks, or parts dislocation. No electrical discontinuity of 1s or more. | Frequency: 10 to 55Hz, single amplitude of 0.75mm, for 10 cycles in 3 axial directions |
| Shock | Contact resistance: 50m maximum. No damage, cracks, or parts dislocation. | Acceleration of 981m/s, 6ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis |
| Humidity (Steady state) | Contact resistance: 50m maximum. Insulation resistance: 50M minimum. No damage, cracks, or parts dislocation. | 96 hours at 40C and humidity of 90% to 95% |
| Temperature Cycle | Contact resistance: 50m maximum. Insulation resistance: 50M minimum. No damage, cracks, or parts dislocation. | Temperature: -40C / 15 to 35C / 85C / 15 to 35C, Time: 30 / 2 to 3 / 30 / 2 to 3(minutes), 5 cycles |
| Resistance to Soldering heat | No deformation of components affecting performance. | Reflow: At the recommended temperature profile. Manual soldering: 35010C for 5 seconds. |
