The FH28 Series FPC/FFC connectors offer a highly reliable connection with a robust structure, featuring multi-polarized connectors and reinforced body design for superior FPC/FFC retention. Designed for simplified operations with a flip lock mechanism, they provide a clear tactile click upon successful mating. These connectors support standard 0.3mm thick FPC/FFC and boast a fully molded structure that aids PCB layout by protecting contacts and removing design restrictions. They are compatible with automatic pick-n-place mounting and are halogen-free, adhering to IEC61249-2-21 standards. Available in multiple packing options, including 2,000pcs/reel and 500pcs/reel, they are suitable for a wide range of applications requiring secure and efficient FPC/FFC connectivity.
| Item | Specification | Conditions | Notes |
|---|---|---|---|
| Rated Current | 0.5A | When energizing rated current to all contacts, use 70% of rated current. | Note 1 |
| Rated Voltage | 50Vrms | ||
| Operating Temperature Range | -40 to +105℃ | Includes temperature rise caused by current flow. | Note 2 |
| Operating Humidity Range | Relative humidity 90% or less (no condensation) | ||
| Storage Temperature Range | -10 to +50℃ | Refers to products stored for a long period prior to board mounting and use. | Note 3 |
| Storage Humidity Range | Relative humidity 90% or less (no condensation) | ||
| Adaptive FPC/FFC contact specifications | t= 0.3 0.05 | ||
| Durability | 20 mating cycles | ||
| Contact Resistance | Maximum of 50mΩ | Measured at 1mA (DC or 1,000Hz) | *including FPC/FFC conductor resistance |
| Insulation Resistance | Minimum of 500MΩ | Measured with DC 100V | |
| Withstanding Voltage | AC 150Vrms is applied for 1 minute. | No flashover or breakdown | |
| Vibration Resistance | Contact Resistance: Maximum of 50mΩ Insulation Resistance: Minimum of 50MΩ | Frequency: 10 to 55Hz, Single amplitude of 0.75mm for 10 cycles in 3 axial directions | No electric discontinuity of 1s or greater |
| Shock Resistance | Contact Resistance: Maximum of 50mΩ Insulation Resistance: Minimum of 50MΩ | Acceleration of 981m/s, 6ms duration, sine half-wave waveform 3 cycles in each of the 3 axis | No damaged, cracked or looseness of parts |
| Humidity Resistance of Steady State | Contact Resistance: Maximum of 50mΩ Insulation Resistance: Minimum of 50MΩ | 96 hours at temperature: 40℃ and humidity: 90 to 95% | No damaged, cracked or looseness of parts |
| Temperature Cycles | Contact Resistance: Maximum of 50mΩ Insulation Resistance: Minimum of 50MΩ | -40/+15 to +35/+105/+15 to +35℃, 30/2 to 3/30/2 to 3 minutes, 5 cycles | No damaged, cracked or looseness of parts |
| Solder Heat Resistance | Contact Resistance: Maximum of 50mΩ | Reflow: according to the Recommended Temperature Profile Hand solder: 350 5℃ for 5 seconds | No damaged, cracked or looseness of parts |
