This product specification sheet details a connector designed for FPC/FFC (Flexible Printed Circuit / Flexible Flat Cable) Type A (t=0.30.03mm) and Type B (t=0.30.05mm). It outlines various electrical, mechanical, and environmental test methods and requirements to ensure reliable performance in a wide operating temperature range of -40 to +105.
| Item | Test Method | Requirements | Applicable Test |
| OPERATING TEMPERATURE RANGE | -40 ~ +105 (note1) | ||
| STORAGE TEMPERATURE RANGE | -10 ~ +50(Packed Condition) | ||
| VOLTAGE | 50V [AC(rms) / DC] | ||
| CURRENT | 0.5A [AC(rms) / DC] (note2) | ||
| CONTACT RESISTANCE | MATE APPLICABLE FPC/FFC AND APPLY A CURRENT OF 1mA INCLUDING FPC/FFC BULK RESISTANCE(L=8mm) | 50 m MAX. AC 20mV MAX, | O |
| VOLTAGE PROOF | MATE APPLICABLE FPC/FFC AND APPLY A VOLTAGE OF AC 150V FOR 1 min. | NO BREAKDOWN. | O |
| INSULATION RESISTANCE | MATE APPLICABLE FPC/FFC AND APPLY A VOLTAGE OF DC 100V | 500 M MIN. | O |
| FPC RETENSION FORCE | MEASURE BY APPLICABLE FPC/FFC(t=0.3) IN 3 DIRECTIONS. | HORIZONTAL DIRECTION : 0.4N*n min. VERTICAL DIRECTION : 0.3N*n min. (n = Number of Contacts)(note 3) | O - |
| DAMP HEAT(STEADY STATE) | EXPOSED AT 402, 90~95 %, 96Hr. | CONTACT RESISTANCE: 50 m MAX. | O - |
| SHOCK | DIRECTION OF PULSE 6ms AT 3 TIMES 981m/s2 | NO ELECTRICAL DISCONTINUITY OF 1. CONTACT RESISTANCE : 50m MAX NO DAMAGE,CRACK AND LOOSENESS OF PARTS | O - O - |
| RAPID CHANGE OF TEMPERATURE | TEMPERATURE:-40215~35+105215~35 TIME : 30 2~3 30 2~3 min. UNDER 5 CYCLES. | CONTACT RESISTANCE: 50 m MAX. INSULATION RESISTANCE: 50M MIN. NO DAMAGE, CRACK OR LOOSENESS OF PARTS. | O - O - |
| DRY HEAT | EXPOSED AT 1052, 96Hr | CONTACT RESISTANCE : 50m MAX NO DAMAGE, CRACK OR LOOSENESS OF PARTS. | O - |
| COLD | EXPOSED AT -402, 96Hr | NO DAMAGE, CRACK OR LOOSENESS OF PARTS. | O - |
| DAMP HEAT, CYCLE | TEMPERATURE -10+65 10 CYCLE(240Hr) | INSULATION RESISTANCE: 50M MIN. NO DAMAGE, CRACK OR LOOSENESS OF PARTS. | O - |
| HYDROGEN SULPHIDE | EXPOSED IN 3 PPM FOR 96Hr. (TEST STANDARD : JEIDA-38) | NO EVIDENCE OF CORROSION WHICH AFFECTS TO OPERATION OF CONNECTOR. | O - |
| CORROSION SALT SPRAY | EXPOSED AT 352, 51% SALT WATER SPRAY FOR 48Hr | CONTACT RESISTANCE 50m MAX NO DAMAGE, CRACK OR LOOSENESS OF PARTS. | O - |
| RESISTANCE TO SOLDERING HEAT | 1) REFLOW SOLDERING: PEAK TMP. : 250 MAX. 2) SOLDERING IRONS TMP. : 35010 FOR 51s THE SURFACE BEING IMMERSED. | NO DEFORMATION OF CASE OF EXCESSIVE LOOSENESS OF THE TERMINALS. NO DAMAGE OF ELECTRICAL PERFORMANCE | O - |
| SOLDER ABILITY | SOLDER DIPPING TEMPERATURE 2455 FOR IMMERSION DURATION, 30.3 sec. (TEST STANDARD : MIL-STD-202) | A NEW UNIFORM COATING OF SOLDER SHALL COVER A MINIMUM OF 95% OF THE SURFACE BEING IMMERSED. | O - |
