The FH28 Series FPC/FFC connectors offer a highly reliable connection with a robust structure, featuring multi-polarized connectors and a reinforced body. They simplify operations with an easy-to-use flip lock mechanism that provides clear tactile feedback. These connectors boast significantly increased FPC/FFC retention force compared to previous series, accept standard 0.3mm thick FPC/FFC, and feature a fully molded structure that aids PCB layout. Designed for automatic pick-n-place mounting and compliant with halogen-free standards, they are available in multiple packing options.
| Item | Specification | Conditions | Notes |
|---|---|---|---|
| Rated Current | 0.5A | When energizing rated current to all contacts, use 70% of rated current. | Note 1 |
| Rated Voltage | AC 50Vrms | ||
| Operating Temperature Range | -40 to +105C | Includes temperature rise caused by current flow. | Note 2 |
| Operating Humidity Range | Relative humidity 90% or less (no condensation) | ||
| Storage Temperature Range | -10 to +50C | Refers to products stored for a long period prior to board mounting and use. | Note 3 |
| Storage Humidity Range | Relative humidity 90% or less (no condensation) | ||
| Adaptive FPC/FFC contact specifications | t= 0.3 0.05 | ||
| Durability | 20 mating cycles | ||
| Contact Resistance | Maximum of 50m | Measured at 1mA (DC or 1,000Hz) | *including FPC/FFC conductor resistance |
| Insulation Resistance | Minimum of 500M | Measured with DC 100V | |
| Withstanding Voltage | AC 150Vrms is applied for 1 minute. | No flashover or breakdown | |
| Vibration Resistance | Frequency: 10 to 55Hz, Single amplitude of 0.75mm for 10 cycles in 3 axial directions | No electric discontinuity of 1s or greater | Contact Resistance: Maximum of 50m |
| Shock Resistance | Acceleration of 981m/s, 6ms duration, sine half-wave waveform 3 cycles in each of the 3 axis | No damaged, cracked or looseness of parts | Contact Resistance: Maximum of 50m, Insulation Resistance: Minimum of 50M |
| Humidity Resistance of Steady State | 96 hours at temperature: 40C and humidity: 90 to 95% | No damaged, cracked or looseness of parts | Contact Resistance: Maximum of 50m, Insulation Resistance: Minimum of 50M |
| Temperature Cycles | -40/+105/+15 to +35C, 5 cycles | Time: 30/2 to 3 minutes | Contact Resistance: Maximum of 50m, No damaged, cracked or looseness of parts |
| Solder Heat Resistance | Reflow: according to the Recommended Temperature Profile; Hand solder: 350 5C for 5 seconds | No damaged, cracked or looseness of parts |
