The FH19C and FH19SC Series are low-profile 0.5mm pitch FPC/FFC connectors designed for miniaturized portable equipment and personal mobile devices. These connectors offer a height of 0.9mm and a width of 3mm, significantly reducing PCB footprint and connector weight compared to previous models. They feature a proven Flip-Lock actuator system for easy and reliable operation, with tactile confirmation of locking. The design allows conductive traces to run underneath the connector, as the bottom surface is solid without exposed contacts. They accept 0.2mm and 0.3mm thick FPC/FFC and are suitable for automated placement with tape and reel packaging. Available in contact counts from 4 to 50, these connectors satisfy Halogen-free requirements.
| Parameter | Specification | Conditions |
|---|---|---|
| Current Rating | 0.5 A (Note 1) | |
| Voltage Rating | 50 V AC | |
| Operating Temperature Range | -55C to +85C (Note 2) | |
| Operating Humidity Range | Relative humidity 90% max. (No condensation) | |
| Storage Temperature Range | -10C to +50C (Note 3) | |
| Storage Humidity Range | Relative humidity 90% max. (No condensation) | |
| Insulation Resistance | 500 M ohms min. | 100 V DC |
| Withstanding Voltage | No flashover or insulation breakdown | 150 V AC/1 minute |
| Contact Resistance | 100 m ohms max. | 1 mA (Including FPC/FFC conductor resistance) |
| Durability | Contact resistance: 100 m ohms max. | 20 cycles (insertion/withdrawal) |
| Vibration | Contact resistance: 100 m ohms max. | Frequency: 10 to 55 Hz, single amplitude of 0.75mm, 10 cycles in each of the 3 directions |
| Shock | Contact resistance: 100 m ohms max. | Acceleration of 981 m/s, 6 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis. |
| Humidity (Steady state) | Contact resistance: 100 m ohms max. Insulation resistance: 100 M ohms min. | 40C and humidity of 90 to 95% for 96 hours |
| Temperature Cycle | Contact resistance: 100 m ohms max. Insulation resistance: 100 M ohms min. | -55C / +15C to +35C / +85C / +15C to +35C, 5 cycles |
| Resistance to Reflow | No deformation of components affecting performance. | At the recommended temperature profile |
| Resistance to Manual Soldering | No deformation of components affecting performance. | 350C5C for 5 seconds |
