The FH62 Series is a space-saving FPC connector featuring a 0.25mm pitch and 1.1mm height, designed for top contact single action lock and high FPC retention force. Its automatic single action lock mechanism simplifies FPC insertion and removal, contributing to assembly time reduction and preventing lever damage. The connector supports 0.3mm-thick FPC and high-speed transmission standards like eDP (ver1.4), MIPI (D-PHY), and USB3.0 due to excellent impedance properties. It is also halogen-free.
| Specification | Value | Conditions |
| Rated Current | 0.3A | |
| Operating Temperature Range | -55C to +85C | (Note 1) |
| Storage Temperature Range | -10C to +50C | (Note 2) |
| Rated Voltage | 30V AC/DC | |
| Operating Humidity Range | Relative humidity 90% max. (No condensation) | |
| Storage Humidity Range | Relative humidity 90% max. (No condensation) | |
| Adaptive FPC/FFC Contact Thickness | 0.3 0.03mm | |
| Insulation Resistance | 50 M min. | 100V DC |
| Withstanding Voltage | No flashover or insulation breakdown | 90V AC rms / 1 minute |
| Contact Resistance | 100 m max. | 1mA (AC) *Including FPC conductor resistance |
| Durability (insertion/withdrawal) | Contact resistance: 100 m max. No damage, cracks, or parts dislocation | 10 cycles |
| Vibration | No electrical discontinuity of 1s or more. Contact resistance: 100 m max. No damage, cracks, or parts dislocation | Frequency: 10 to 55Hz, single amplitude of 0.75mm, 10 cycles in each of the 3 directions |
| Shock | No electrical discontinuity of 1s or more. Contact resistance: 100 m max. No damage, cracks, or parts dislocation | Acceleration of 981m/s, duration of 6ms, sine half-wave waveform, 3 cycles in each of the 3 axes |
| Humidity (Steady state) | Contact resistance: 100 m max. Insulation resistance: 50 M min. No damage, cracks, or parts dislocation | 96 hours at temperature of 40C and humidity of 90% to 95% |
| Temperature cycle | Contact resistance: 100 m max. Insulation resistance: 50 M min. No damage, cracks, or parts dislocation | Temperature: -55C / +15C to +35C / +85C / +15C to +35C Time: 30 / 2 to 3 / 30 / 2 to 3 (Minutes) 5 cycles |
| Resistance to soldering heat | No deformation of components affecting performance | Reflow: See recommended temperature profile (Page 8). Number of reflow: 2 times. Manual soldering: 350 10C for 5 seconds. |
