The FH12 Series offers high-density mounting FPC/FFC connectors with a rotating one-touch ZIF mechanism for easy operation and clear tactile feedback. Available in 0.5mm and 1mm pitches, with top and bottom contact, and vertical mount options. The FH12S version features a reinforced actuator for enhanced durability.
| Specification | Value | Conditions |
|---|---|---|
| Current Rating | 0.5A DC (Note 1) | |
| Voltage Rating | 50V AC | |
| Operating Temperature Range | -40 to +85C (Note 2) | |
| Storage Temperature Range | -10 to +50C (Note 3) | |
| Operating Humidity Range | 90% max. Relative humidity | (Not dewed) |
| Storage Humidity Range | 90% max. Relative humidity | (Not dewed) |
| Insulation Resistance | 500M minimum | 100V DC |
| Withstanding Voltage | 150V AC / 1 minute | No flashover or insulation breakdown. |
| Contact Resistance | 50m maximum | 1mA |
| Durability (Insertion/withdrawal) | 50m maximum | 20 cycles. No damage, cracks, or parts dislocation. No electrical discontinuity of 1s or more. |
| Vibration | 50m maximum | Frequency: 10 to 55Hz, single amplitude of 0.75mm, for 10 cycles in 3 axial directions. No damage, cracks, or parts dislocation. No electrical discontinuity of 1s or more. |
| Shock | 50m maximum | Acceleration of 981m/s, 6ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis. No damage, cracks, or parts dislocation. |
| Humidity (Steady state) | 50m maximum | 96 hours at 40C and humidity of 90% to 95%. Insulation resistance: 50M minimum. No damage, cracks, or parts dislocation. |
| Temperature Cycle | 50m maximum | Temperature: -40C / 15 to 35C / 85C / 15 to 35C, Time: 30min / 2 to 3min / 30min / 2 to 3min (minutes), 5 cycles. Insulation resistance: 50M minimum. No damage, cracks, or parts dislocation. |
| Resistance to Soldering heat | Reflow: At the recommended temperature profile. Manual soldering: 35010C for 5 seconds. No deformation of components affecting performance. | |
| Adaptive FPC/FFC contact specifications | t=0.30.05 | Gold plated |
Notes:
Note 1: When passing the current through all of the contacts, use 70% of the current rating.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term "storage" refers to products stored for long periods of time prior to mounting and use. Operating Temperature Range and Humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation.
Connector Height:
Standard type connector height: 2mm
Connector height of type with strengthened Flip-lock actuator: 2.4mm
Packaging: Embossed tape reel packaging (2,000 pcs/reel, 500 pcs/reel). Order by number of reels.
