The FH35C Series is a dual-sided FPC connector featuring a 0.3 mm pitch and a low profile of 0.9 mm. Its back flip actuator design enhances FPC retention force and supports high-speed transmissions with excellent impedance characteristics, compatible with eDP (ver1.3) and MIPI (D-PHY) specifications. Designed for automated assembly, it is delivered with the actuator open for reduced installation time and features tapered guides for easy FPC insertion. The connector supports 0.2mm thick FPC and offers bottom side protection with over-molding. This series is halogen-free, meeting stringent environmental standards.
| Items | Specifications | Conditions |
| Insulation Resistance | No less than 50 M | Measured at 100 V DC |
| Withstand Voltage | No flashover or breakdown | 90 V AC for one minute |
| Contact Resistance | 100 m MAX. * Including FPC conductor resistance | AC 20 mV MAX (1 KHz), 1 mA |
| Mating Cycles | Contact resistance: no more than 100 m | 10 times |
| Vibration Resistance | No electric outage of 1 s or greater Contact resistance: no more than 100 m | At the frequency of 10-55 Hz, half amplitude 0.75 mm, and 10 cycles in each of three axial directions |
| Shock Resistance | No electric outage of 1 s or greater Contact resistance: no more than 100 m | Acceleration: 981 m/s Duration: 6 ms, sine half-wave, 3 cycles in each of the 3 axis each in both directions |
| Humidity Resistance (Steady State) | Contact resistance: no more than 100 m Insulation Resistance: 50 M or more | Left to stand for 96 hours at the temperature of 40C and the humidity of 90% to 95% |
| Temperature Cycles | Contact resistance: no more than 100 m Insulation Resistance: 50 M or more | Temperature: -55 +15 to +35 +85 +15 to +35C Time: 30 2 to 3 30 2 to 3 minutes 5 cycles with the above conditions |
| Solder Heat Resistance | No deformation in appearance or marked instability of contacts | Reflow: According to the Recommended Temperature Profile Manual soldering: 35010C for 51 sec. |
| Items | Specifications |
| Current rating | 0.2 A (Note 1) |
| Voltage rating | AC 30 Vrms |
| Operating temperature Range | 55 to +85C (Note 2) |
| Operating humidity Range | 90% or less of relative humidity (No dew condensation is allowed) |
| Storage temperature Range | -10 to +50C (Note 3) |
| Storage humidity Range | 90% or less of relative humidity (No dew condensation is allowed) |
| FPC Contact Specifications | t = 0.2 0.03 gold plating |
| Part | Materials | Treatment | UL Regulation |
| Insulator | LCP Gray | UL94V-0 | |
| Insulator | Polyamide resin | Black | |
| Contact | Phosphor bronze | Nickel barrier, Gold plating | ------ |
| Metal fitting | Phosphor bronze | Pure tin reflow plating | ------ |
| Product No. | HRS No. | No. of Contacts | A | B | C | D | E |
| FH35C-9S-0.3SHW(50) | CL580-2910-5-50 | 9 | 4.3 | 1.8 | 2.4 | 3.03 | 3.73 |
| FH35C-11S-0.3SHW(50) | CL580-2917-4-50 | 11 | 4.9 | 2.4 | 3 | 3.63 | 4.33 |
| FH35C-13S-0.3SHW(50) | CL580-2925-2-50 | 13 | 5.5 | 3 | 3.6 | 4.23 | 4.93 |
| FH35C-15S-0.3SHW(50) | CL580-2919-0-50 | 15 | 6.1 | 3.6 | 4.2 | 4.83 | 5.53 |
| FH35C-17S-0.3SHW(50) | CL580-2916-1-50 | 17 | 6.7 | 4.2 | 4.8 | 5.43 | 6.13 |
| FH35C-19S-0.3SHW(50) | CL580-2921-1-50 | 19 | 7.3 | 4.8 | 5.4 | 6.03 | 6.73 |
| FH35C-21S-0.3SHW(50) | CL580-2922-4-50 | 21 | 7.9 | 5.4 | 6 | 6.63 | 7.33 |
| FH35C-23S-0.3SHW(50) | CL580-2911-8-50 | 23 | 8.5 | 6 | 6.6 | 7.23 | 7.93 |
| FH35C-25S-0.3SHW(50) | CL580-2912-0-50 | 25 | 9.1 | 6.6 | 7.2 | 7.83 | 8.53 |
| FH35C-27S-0.3SHW(50) | CL580-2918-7-50 | 27 | 9.7 | 7.2 | 7.8 | 8.43 | 9.13 |
| FH35C-31S-0.3SHW(50) | CL580-2923-7-50 | 31 | 10.9 | 8.4 | 9 | 9.63 | 10.33 |
| FH35C-33S-0.3SHW(50) | CL580-2913-3-50 | 33 | 11.5 | 9 | 9.6 | 10.23 | 10.93 |
| FH35C-35S-0.3SHW(50) | CL580-2926-5-50 | 35 | 12.1 | 9.6 | 10.2 | 10.83 | 11.53 |
| FH35C-37S-0.3SHW(50) | CL580-2914-6-50 | 37 | 12.7 | 10.2 | 10.8 | 11.43 | 12.13 |
| FH35C-39S-0.3SHW(50) | CL580-2915-9-50 | 39 | 13.3 | 10.8 | 11.4 | 12.03 | 12.73 |
| FH35C-41S-0.3SHW(50) | CL580-2924-0-50 | 41 | 13.9 | 11.4 | 12 | 12.63 | 13.33 |
| FH35C-45S-0.3SHW(50) | CL580-2909-6-50 | 45 | 15.1 | 12.6 | 13.2 | 13.83 | 14.53 |
| FH35C-49S-0.3SHW(50) | 49 | 16.3 | 13.8 | 14.4 | 15.03 | 15.73 | |
| FH35C-51S-0.3SHW(50) | CL580-2920-9-50 | 51 | 16.9 | 14.4 | 15 | 15.63 | 16.33 |
| Product No. | HRS No. | No. of Contacts | B | C |
| FH35C-9S-0.3SHW(50) | CL580-2910-5-50 | 9 | 1.8 | 2.4 |
| FH35C-11S-0.3SHW(50) | CL580-2917-4-50 | 11 | 2.4 | 3 |
| FH35C-13S-0.3SHW(50) | CL580-2925-2-50 | 13 | 3 | 3.6 |
| FH35C-15S-0.3SHW(50) | CL580-2919-0-50 | 15 | 3.6 | 4.2 |
| FH35C-17S-0.3SHW(50) | CL580-2916-1-50 | 17 | 4.2 | 4.8 |
| FH35C-19S-0.3SHW(50) | CL580-2921-1-50 | 19 | 4.8 | 5.4 |
| FH35C-21S-0.3SHW(50) | CL580-2922-4-50 | 21 | 5.4 | 6 |
| FH35C-23S-0.3SHW(50) | CL580-2911-8-50 | 23 | 6 | 6.6 |
| FH35C-25S-0.3SHW(50) | CL580-2912-0-50 | 25 | 6.6 | 7.2 |
| FH35C-27S-0.3SHW(50) | CL580-2918-7-50 | 27 | 7.2 | 7.8 |
| FH35C-31S-0.3SHW(50) | CL580-2923-7-50 | 31 | 8.4 | 9 |
| FH35C-33S-0.3SHW(50) | CL580-2913-3-50 | 33 | 9 | 9.6 |
| FH35C-35S-0.3SHW(50) | CL580-2926-5-50 | 35 | 9.6 | 10.2 |
| FH35C-37S-0.3SHW(50) | CL580-2914-6-50 | 37 | 10.2 | 10.8 |
| FH35C-39S-0.3SHW(50) | CL580-2915-9-50 | 39 | 10.8 | 11.4 |
| FH35C-41S-0.3SHW(50) | CL580-2924-0-50 | 41 | 11.4 | 12 |
| FH35C-45S-0.3SHW(50) | CL580-2909-6-50 | 45 | 12.6 | 13.2 |
| FH35C-49S-0.3SHW(50) | 49 | 13.8 | 14.4 | |
| FH35C-51S-0.3SHW(50) | CL580-2920-9-50 | 51 | 14.4 | 15 |
