The FH12 Series connectors offer a rotating one-touch ZIF mechanism for easy operation with light force, providing a clear tactile click upon successful mating. Designed for high-density mounting, these connectors require less space than slide-locking types and can be mounted in the center of the PCB. Available in top and bottom contact configurations, as well as a vertical mount type, with 0.5mm and 1mm pitch options. The FH12S version features a reinforced actuator for added security against breakage in specific pin counts.
| Specification | Value | Conditions |
| Current Rating | 0.5A DC (70% of rating when passing current through all contacts) | Note 1 |
| Voltage Rating | 50V AC | |
| Operating Temperature Range | -40 to +85C | Note 2 (Includes temperature rise) |
| Storage Temperature Range | -10 to +50C | Note 3 (Long period prior to mounting/use) |
| Operating Humidity Range | 90% max. Relative humidity | (Not dewed) |
| Storage Humidity Range | 90% max. Relative humidity | (Not dewed) |
| Adaptive FPC/FFC Contact Thickness | 0.30.05 mm | Gold plated |
| Insulation Resistance | 500M minimum | 100V DC |
| Withstanding Voltage | 150V AC / 1 minute | No flashover or insulation breakdown |
| Contact Resistance | 50m maximum | 1mA |
| Durability (Insertion/withdrawal) | 50m maximum | 20 cycles, No damage, cracks, or parts dislocation. No electrical discontinuity of 1s or more. |
| Vibration | 50m maximum | Frequency: 10 to 55Hz, single amplitude of 0.75mm, for 10 cycles in 3 axial directions. No damage, cracks, or parts dislocation. No electrical discontinuity of 1s or more. |
| Shock | 50m maximum | Acceleration of 981m/s, 6ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis. No damage, cracks, or parts dislocation. |
| Humidity (Steady state) | 50m maximum | Insulation resistance: 50M minimum. 96 hours at 40C and humidity of 90% to 95%. No damage, cracks, or parts dislocation. |
| Temperature Cycle | 50m maximum | Insulation resistance: 50M minimum. Temperature: -40C / 15 to 35C / 85C / 15 to 35C, Time: 30 / 2 to 3 / 30 / 2 to 3 (minutes). 5 cycles. No damage, cracks, or parts dislocation. |
| Resistance to Soldering heat | No deformation of components affecting performance. | Reflow: At the recommended temperature profile. Manual soldering: 35010C for 5 seconds. |
| Connector Height (Standard type) | 2mm | |
| Connector Height (Strengthened Flip-lock actuator type) | 2.4mm |
