The FH30 Series are Zero Insertion Force (ZIF) connectors designed for Flexible Printed Circuits (FPC). Featuring a Flip-Lock actuator for secure and easy FPC insertion, these connectors offer strong actuator retention, FPC position hold, and compatibility with standard FPC thicknesses. Their design facilitates automated board placement and allows conductive traces on the PCB to run underneath the connector. Available in 0.3mm and 0.4mm pitch, they are suitable for various electronic applications.
| Item | Specification | Conditions |
|---|---|---|
| Current Rating | 0.3 mm pitch: 0.15 A 0.4 mm pitch: 0.3 A | Note 1: When passing the current through all of the contacts, use 70% of the rated current. |
| Voltage Rating | 0.3 mm pitch: 30 Vrms AC 0.4 mm pitch: 50 Vrms AC | |
| Withstanding Voltage | 0.3 mm pitch: 90 Vrms AC / 1 minute 0.4 mm pitch: 150 Vrms AC / 1 minute | No flashover or insulation breakdown |
| Insulation Resistance | 500 M min. | |
| Contact Resistance | 150 m max. | * Including FPC conductor resistance |
| Durability | 150 m max. | 20 cycles. No damage, cracks, or parts dislocation. |
| Vibration | 150 m max. | Frequency: 10 to 55 Hz, single amplitude of 0.75 mm. No electrical discontinuity of 1s or longer. |
| Shock | 150 m max. | Acceleration of 981m/s, 6 ms duration, sine half-wave, 3 cycles in each of the 3 axis. No electrical discontinuity of 1s or longer. |
| Humidity (Steady state) | Contact resistance: 150 m max. Insulation resistance: 50M min. | 96 hours at 40C and humidity of 90 to 95%. No damage, cracks, or parts dislocation. |
| Temperature Cycle | Contact resistance: 150 m max. Insulation resistance: 50M min. | Temperature: -40C +15C to 35C +85C+15C to 35C. Time: -30 2 to 3 +30 +2 to 3. 5 cycles. No damage, cracks, or parts dislocation. |
| Resistance to Soldering Heat | Reflow: At the recommended temperature profile. Manual soldering: 350C for 5 seconds. No deformation of components affecting performance. | |
| Operating Temperature Range | -40 to +85C | (Note 2: Includes temperature rise caused by current flow) |
| Operating Humidity Range | Relative humidity 90% max. (No condensation) | |
| Storage Temperature Range | -10 to +50C | (Note 3: Refers to products stored for a long period prior to mounting and use. The operating temperature and humidity range covers the non-conducting condition of connectors after installation on a board.) |
| Storage Humidity Range | Relative humidity 90% max. (No condensation) | |
| FPC Thickness | 0.3mm | Standard |
| Contact Pitch | 0.3 mm, 0.4 mm | |
| Connector Height | 3 mm | Above the board |
