The FH35C Series is a dual-sided FPC connector designed with a 0.3 mm pitch and a low profile of 0.9 mm. It features a back flip actuator for improved FPC retention force, offering design flexibility by utilizing both top and bottom contacts. This series supports high-speed transmissions with excellent impedance characteristics, making it compatible with eDP (ver1.3) and MIPI (D-PHY) specifications. The connectors are delivered with the actuator open for reduced installation time and cost, and feature tapered guides for easy FPC insertion. They are compatible with 0.2mm thick FPC and offer bottom side protection with over-molding. The FH35C Series is halogen-free and available in tape-and-reel packaging for automatic mounting.
| Items | Specifications | Conditions |
| Insulation Resistance | No less than 50 M | Measured at 100 V DC |
| Withstand Voltage | No flashover or breakdown | 90 V AC for one minute |
| Contact Resistance | 100 m MAX. * Including FPC conductor resistance | AC 20 mV MAX (1 KHz), 1 mA |
| Mating Cycles | Contact resistance: no more than 100 m; No breakage, cracks, or loosened parts | 10 times |
| Vibration Resistance | No electric outage of 1 s or greater; Contact resistance: no more than 100 m; No breakage, cracks, or loosened parts | At the frequency of 10-55 Hz, half amplitude 0.75 mm, and 10 cycles in each of three axial directions |
| Shock Resistance | No electric outage of 1 s or greater; Contact resistance: no more than 100 m; No breakage, cracks, or loosened parts | Acceleration: 981 m/s; Duration: 6 ms, sine half-wave, 3 cycles in each of the 3 axis each in both directions |
| Humidity Resistance (Steady State) | Contact resistance: no more than 100 m; Insulation Resistance: 50 M or more; No breakage, cracks, or loosened parts | Left to stand for 96 hours at the temperature of 40C and the humidity of 90% to 95% |
| Temperature Cycles | Contact resistance: no more than 100 m; Insulation Resistance: 50 M or more; No breakage, cracks, or loosened parts | Temperature: -55 +15 to +35 +85 +15 to +35C; Time: 30 2 to 3 30 2 to 3 minutes; 5 cycles with the above conditions |
| Solder Heat Resistance | No deformation in appearance or marked instability of contacts | Reflow: According to the Recommended Temperature Profile; Manual soldering: 350 10C for 5 1 sec. |
| Product No. | HRS No. | No. of Contacts | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) |
| FH35C-9S-0.3SHW(50) | CL580-2910-5-50 | 9 | 4.3 | 1.8 | 2.4 | 3.03 | 3.73 |
| FH35C-11S-0.3SHW(50) | CL580-2917-4-50 | 11 | 4.9 | 2.4 | 3 | 3.63 | 4.33 |
| FH35C-13S-0.3SHW(50) | CL580-2925-2-50 | 13 | 5.5 | 3 | 3.6 | 4.23 | 4.93 |
| FH35C-15S-0.3SHW(50) | CL580-2919-0-50 | 15 | 6.1 | 3.6 | 4.2 | 4.83 | 5.53 |
| FH35C-17S-0.3SHW(50) | CL580-2916-1-50 | 17 | 6.7 | 4.2 | 4.8 | 5.43 | 6.13 |
| FH35C-19S-0.3SHW(50) | CL580-2921-1-50 | 19 | 7.3 | 4.8 | 5.4 | 6.03 | 6.73 |
| FH35C-21S-0.3SHW(50) | CL580-2922-4-50 | 21 | 7.9 | 5.4 | 6 | 6.63 | 7.33 |
| FH35C-23S-0.3SHW(50) | CL580-2911-8-50 | 23 | 8.5 | 6 | 6.6 | 7.23 | 7.93 |
| FH35C-25S-0.3SHW(50) | CL580-2912-0-50 | 25 | 9.1 | 6.6 | 7.2 | 7.83 | 8.53 |
| FH35C-27S-0.3SHW(50) | CL580-2918-7-50 | 27 | 9.7 | 7.2 | 7.8 | 8.43 | 9.13 |
| FH35C-31S-0.3SHW(50) | CL580-2923-7-50 | 31 | 10.9 | 8.4 | 9 | 9.63 | 10.33 |
| FH35C-33S-0.3SHW(50) | CL580-2913-3-50 | 33 | 11.5 | 9 | 9.6 | 10.23 | 10.93 |
| FH35C-35S-0.3SHW(50) | CL580-2926-5-50 | 35 | 12.1 | 9.6 | 10.2 | 10.83 | 11.53 |
| FH35C-37S-0.3SHW(50) | CL580-2914-6-50 | 37 | 12.7 | 10.2 | 10.8 | 11.43 | 12.13 |
| FH35C-39S-0.3SHW(50) | CL580-2915-9-50 | 39 | 13.3 | 10.8 | 11.4 | 12.03 | 12.73 |
| FH35C-41S-0.3SHW(50) | CL580-2924-0-50 | 41 | 13.9 | 11.4 | 12 | 12.63 | 13.33 |
| FH35C-45S-0.3SHW(50) | CL580-2909-6-50 | 45 | 15.1 | 12.6 | 13.2 | 13.83 | 14.53 |
| FH35C-49S-0.3SHW(50) | 49 | 16.3 | 13.8 | 14.4 | 15.03 | 15.73 | |
| FH35C-51S-0.3SHW(50) | CL580-2920-9-50 | 51 | 16.9 | 14.4 | 15 | 15.63 | 16.33 |
| Product No. | HRS No. | No. of Contacts | B (mm) | C (mm) |
| FH35C-9S-0.3SHW(50) | CL580-2910-5-50 | 9 | 1.8 | 2.4 |
| FH35C-11S-0.3SHW(50) | CL580-2917-4-50 | 11 | 2.4 | 3 |
| FH35C-13S-0.3SHW(50) | CL580-2925-2-50 | 13 | 3 | 3.6 |
| FH35C-15S-0.3SHW(50) | CL580-2919-0-50 | 15 | 3.6 | 4.2 |
| FH35C-17S-0.3SHW(50) | CL580-2916-1-50 | 17 | 4.2 | 4.8 |
| FH35C-19S-0.3SHW(50) | CL580-2921-1-50 | 19 | 4.8 | 5.4 |
| FH35C-21S-0.3SHW(50) | CL580-2922-4-50 | 21 | 5.4 | 6 |
| FH35C-23S-0.3SHW(50) | CL580-2911-8-50 | 23 | 6 | 6.6 |
| FH35C-25S-0.3SHW(50) | CL580-2912-0-50 | 25 | 6.6 | 7.2 |
| FH35C-27S-0.3SHW(50) | CL580-2918-7-50 | 27 | 7.2 | 7.8 |
| FH35C-31S-0.3SHW(50) | CL580-2923-7-50 | 31 | 8.4 | 9 |
| FH35C-33S-0.3SHW(50) | CL580-2913-3-50 | 33 | 9 | 9.6 |
| FH35C-35S-0.3SHW(50) | CL580-2926-5-50 | 35 | 9.6 | 10.2 |
| FH35C-37S-0.3SHW(50) | CL580-2914-6-50 | 37 | 10.2 | 10.8 |
| FH35C-39S-0.3SHW(50) | CL580-2915-9-50 | 39 | 10.8 | 11.4 |
| FH35C-41S-0.3SHW(50) | CL580-2924-0-50 | 41 | 11.4 | 12 |
| FH35C-45S-0.3SHW(50) | CL580-2909-6-50 | 45 | 12.6 | 13.2 |
| FH35C-49S-0.3SHW(50) | 49 | 13.8 | 14.4 | |
| FH35C-51S-0.3SHW(50) | CL580-2920-9-50 | 51 | 14.4 | 15 |
