This product is a connector designed for various electronic applications. It offers a wide operating temperature range and robust mechanical and environmental performance, making it suitable for demanding conditions. The connector meets stringent electrical and mechanical specifications, ensuring reliable performance.
| Item | Test Method | Requirements | QT | AT |
| OPERATING CONDITIONS | ||||
| APPLICABLE STANDARD OPERATING TEMPERATURE RANGE | -40 C TO 105 C | |||
| STORAGE TEMPERATURE RANGE (PACKED CONDITION) | -10 C TO 50 C | |||
| OPERATING OR STORAGE HUMIDITY RANGE | RELATIVE HUMIDITY | 90 % MAX (NOT DEWED) | ||
| RATING VOLTAGE | 50 V AC / DC | |||
| CURRENT | 0.5 A (note) | |||
| APPLICABLE CABLE | t=0.30.05mm, GOLD PLATING | |||
| ELECTRICAL CHARACTERISTICS | ||||
| CONTACT RESISTANCE | AC 20 mV MAX ( 1 KHz ) , 1 mA . | 50 m MAX. INCLUDING FPC,FFC BULK RESISTANCE (L=8mm) | ||
| INSULATION RESISTANCE | 100 V DC. | 500 M MIN. | ||
| VOLTAGE PROOF | 150 V AC FOR 1 min. | NO FLASHOVER OR BREAKDOWN. | ||
| MECHANICAL CHARACTERISTICS | ||||
| MECHANICAL OPERATION | 20 TIMES INSERTIONS AND EXTRACTIONS. | CONTACT RESISTANCE: 50 m MAX. NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | ||
| VIBRATION | FREQUENCY 10 TO 55 Hz, HALF AMPLITUDE 0.75 mm, m/s2 FOR 10 CYCLES IN 3 AXIAL DIRECTIONS. | NO ELECTRICAL DISCONTINUITY OF 1 s. CONTACT RESISTANCE: 50 m MAX. NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | ||
| SHOCK | 981 m/s2 , DURATION OF PULSE 6 ms AT 3 TIMES IN 3 BOTH AXIAL DIRECTIONS. | |||
| FPC RETENTION FORCE | MEASURED BY APPLICABLE FPC. (THICKNESS OF FPC SHALL BE t=0.30mm AT INITIAL CONDITION.) | DIRECTION OF INSERTION: 0.3Nn MIN. VERTICAL DIRECTION TO INSERTION: 0.2Nn MIN. (n:NUMBER OF CONTACTS) | ||
| ENVIRONMENTAL CHARACTERISTICS | ||||
| RAPID CHANGE OF TEMPERATURE | TEMPERATURE-40+15TO+35+105+15TO+35C TIME 30 2 TO 3 30 2 TO 3 min UNDER 5 CYCLES. | CONTACT RESISTANCE: 50 m MAX. INSULATION RESISTANCE: 50 M MIN. NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | ||
| DAMP HEAT (STEADY STATE) | EXPOSED AT 402C, RELATIVE HUMIDITY 90 TO 95 %, 96 h. | |||
| DAMP HEAT, CYCLIC | EXPOSED AT -10 TO +65 C, RELATIVE HUMIDITY 90 TO 96 %, 10 CYCLES,TOTAL 240 h. | CONTACT RESISTANCE: 50 m MAX. INSULATION RESISTANCE: 1 M MIN. (AT HIGH HUMIDITY) INSULATION RESISTANCE: 50 M MIN. (AT DRY) NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | ||
| DRY HEAT | EXPOSED AT 1052 C, 96 h. | CONTACT RESISTANCE: 50 m MAX. NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | ||
| COLD | EXPOSED AT -403C, 96 h. | |||
| CORROSION SALT MIST | EXPOSED AT 352C , 5 % SALT WATER SPRAY FOR 96 h. | CONTACT RESISTANCE: 50 m MAX. NO EVIDENCE OF CORROSION WHICH AFFECTS TO OPERATION OF CONNECTOR. | ||
| SULPHUR DIOXIDE [JIS C 60068-2-42] | EXPOSED AT 402 C , RELATIVE HUMIDITY 805% ,255 ppm FOR 96 h. | |||
| HYDROGEN SULPHIDE [JIS C 60068-2-43] | EXPOSED AT 402 C , RELATIVE HUMIDITY 805% ,10 TO 15 ppm FOR 96 h. | |||
| OTHER SPECIFICATIONS | ||||
| RESISTANCE TO SOLDERING HEAT | 1) REFLOW SOLDERING PEAK TMP. 250 C MAX . REFLOW TMP. OVER 230 C WHITIN 60 sec. 2) SOLDERING IRONS : TMP. 3505C FOR 51 sec . | NO DEFORMATION OF CASE OF EXCESSIVE LOOSENESS OF THE TERMINALS. | ||
| SOLDERABILITY | SOLDERED AT SOLDER TEMPERATURE, 2455 C FOR IMMERSION DURATION, 20.5 sec. | A NEW UNIFORM COATING OF SOLDER SHALL COVER A MINIMUM OF 95 % OF THE SURFACE BEING IMMERSED. | ||
