The FH12 Series connectors offer a 0.5mm and 1mm pitch for FPC/FFC applications, featuring a rotating one-touch ZIF mechanism for easy operation and a clear tactile click for confirmation. They support high-density mounting due to their compact ZIF system and are available in top contact, bottom contact, and vertical mount configurations. An optional reinforced actuator is available for increased durability in specific pin counts.
| Specification | Value | Conditions |
|---|---|---|
| Current Rating | 0.5A DC (70% when all contacts are used) | |
| Voltage Rating | 50V AC | |
| Operating Temperature Range | -40 to +85C | (Includes temperature rise) |
| Storage Temperature Range | -10 to +50C | (Long-term storage prior to mounting) |
| Operating Humidity Range | 90% max. Relative humidity | (Not dewed) |
| Storage Humidity Range | 90% max. Relative humidity | (Not dewed) |
| Adaptive FPC/FFC Contact Thickness | 0.3 0.05 mm | Gold plated |
| Insulation Resistance | 500M minimum | 100V DC |
| Withstanding Voltage | 150V AC / 1 minute | No flashover or insulation breakdown |
| Contact Resistance | 50m maximum | 1mA |
| Durability (Insertion/withdrawal) | 50m maximum | 20 cycles (No damage, cracks, dislocation, or electrical discontinuity 1s) |
| Vibration | 50m maximum | Frequency: 10 to 55Hz, single amplitude 0.75mm, 10 cycles in 3 axial directions (No damage, cracks, dislocation, or electrical discontinuity 1s) |
| Shock | 50m maximum | Acceleration 981m/s, 6ms duration, sine half-wave, 3 cycles in each of 3 axes (No damage, cracks, dislocation) |
| Humidity (Steady state) | 50m maximum | 96 hours at 40C and 90-95% RH (No damage, cracks, dislocation) |
| Temperature Cycle | 50m minimum | -40C / 15-35C / 85C / 15-35C, 30s / 2-3min / 30s / 2-3min, 5 cycles (No damage, cracks, dislocation) |
| Resistance to Soldering Heat | No deformation of components affecting performance | Reflow: Recommended temperature profile; Manual soldering: 35010C for 5 seconds |
Series Name: FH
Series No.: 12
Type: Blank (standard type), A (Top contact type), S (Type with strengthened flip-lock actuator)
Number of Contacts: Standard type (e.g., 6, 8, 10...), Eccentric type (e.g., 4, 6, 8...)
Contact Alignment: Single (Blank), Eccentric (A)
Contacts Pitch: 0.5mm, 1mm
Contact Type: SH (SMT horizontal mounting type), SVA (SMT vertical mounting type)
Plating Specification: (54) Selective gold plated, (55) Gold plated, (1)(98) Gold plated
FH12S-**S-0.5SH: Number of contacts 30, 40, 45, 50, 53 (Strengthened Flip-lock Actuator)
FH12-**S-0.5SH: Number of contacts 6 to 53 (Standard, 0.5mm pitch, Bottom Contact)
FH12-**S-1SH: Number of contacts 5 to 26 (Standard, 1mm pitch, Bottom Contact)
FH12-**SA-1SH: Number of contacts 4 to 24 (Eccentric, 1mm pitch, Bottom Contact)
FH12-**S-1SVA: Number of contacts 6 to 24 (Vertical mounting, 1mm pitch)
FH12-**S-0.5SVA: Number of contacts 6 to 60 (Vertical mounting, 0.5mm pitch)
FH12A-**S-0.5SH: Number of contacts 10 to 50 (Top Contact, 0.5mm pitch)
