The FH62 Series is a compact FPC connector featuring a 0.25mm pitch and 1.1mm height, designed for space-saving applications. It boasts a single-action top-contact lock mechanism for easy FPC insertion and removal, contributing to reduced assembly time and preventing lever damage. The connector offers high FPC retention force due to its lock design and supports 0.3mm-thick FPC. It is engineered for high-speed transmission, supporting standards like eDP (ver1.4), MIPI (D-PHY), and USB3.0, with excellent impedance properties.
| Item | Specification | Conditions | Rated current | Operating temperature range | Storage temperature range | Rated voltage | Operating humidity range | Storage humidity range | Adaptive FPC/FFC contact specifications |
| Product Specifications | Standard (10): 5,000pcs/reel, (99): 500pcs/reel | 0.3A | -55C to +85C (Note 1) | -10C to +50C (Note 2) | 30V AC/DC | Relative humidity 90% max. (No condensation) | Relative humidity 90% max. (No condensation) | Thickness: = 0.30.03mm | |
| 1. Insulation resistance | 50M min. | 100V DC | |||||||
| 2. Withstanding voltage | No flashover or insulation breakdown | 90V AC rms / 1 minute | |||||||
| 3. Contact resistance | 100m max. * Including FPC conductor resistance | 1mA (AC) | |||||||
| 4. Durability (insertion / withdrawal) | Contact resistance: 100m max. No damage, cracks, or parts dislocation | 10 cycles | |||||||
| 5. Vibration | No electrical discontinuity of 1s or more. Contact resistance: 100m max. No damage, cracks, or parts dislocation | Frequency: 10 to 55Hz, single amplitude of 0.75mm, 10 cycles in each of the 3 directions | |||||||
| 6. Shock | No electrical discontinuity of 1s or more. Contact resistance: 100m max. No damage, cracks, or parts dislocation | Acceleration of 981m/s, duration of 6ms, sine half-wave waveform, 3 cycles in each of the 3 axes | |||||||
| 7. Humidity (Steady state) | Contact resistance: 100m max. Insulation resistance: 50M min. No damage, cracks, or parts dislocation | 96 hours at temperature of 40C and humidity of 90% to 95% | |||||||
| 8. Temperature cycle | Contact resistance: 100m max. Insulation resistance: 50M min. No damage, cracks, or parts dislocation | Temperature: -55C / +15C to +35C / +85C / +15C to +35C Time: 30 / 2 to 3 / 30 / 2 to 3 (Minutes) 5 cycles | |||||||
| 9. Resistance to soldering heat | No deformation of components affecting performance | Reflow: See recommended temperature profile (Page 8); Manual soldering: 350 10C for 5 seconds. Number of reflow: 2 times |
