The FH64MA Series is a super low profile, top contact, back flip FPC connector designed for space-saving applications. With a 0.25mm pitch and a height of only 0.5mm, it offers superior FPC insertion with mating guides and high FPC retention force due to locking retention tabs. The narrow pitch is achievable without increased cost, and it features an original FPC mis-mating detection design. This connector is halogen-free.
| Item | Specifications | Conditions |
| Insulation Resistance | 50M Min. | Measured at 100V DC |
| Withstanding Voltage | No flashover or insulation breakdown | 90V AC for 1 min. |
| Contact Resistance | 200m Max. | *Includes FPC resistance. Measured at 1mA AC |
| Mating Durability | Contact Resistance : 200m Max. No damage, cracks or part dislocation. | 10 times |
| Vibration Resistance | No electrical discontinuity of 1 s Min. Contact Resistance : 200m Max. No damage, cracks or part dislocation. | Frequency : 10 to 55 Hz, single amplitude of 0.75mm, 10 cycles in each of the 3 axis |
| Shock Resistance | No electrical discontinuity of 1 s Min. Contact Resistance : 200m Max. No damage, cracks or part dislocation. | Acceleration of 981m/s 2, 6 ms duration, sine halfwave, 3 cycles in each of the 3 axis |
| Steady State Moisture Resistance | Contact Resistance : 200m Max. Insulation Resistance : 50M Min. No damage, cracks or part dislocation. | Left for 96 hours at 40 and humidity of 90 to 95% |
| Temperature Cycle | Contact Resistance : 200m Max. Insulation Resistance : 50M Min. No damage, cracks or part dislocation. | Temperature : -55 +15 to +35 +85 +15 to +35 Time : 30 2 to 3 30 2 to 3 minutes Above conditions repeated for 5 cycles |
| Soldering Heat Resistance | No deformation in appearance or significant damage to contacts. | Reflow : Refer to the recommended temperature profile Number of reflow times : 2 or less Manual soldering : 350 10 for 5 seconds |
| Rated Current | 0.2A | |
| Rated Voltage | 30V AC/DC | |
| Operating Temperature | -55 to +85 | (Note 1) |
| Operating Humidity Range | Relative humidity 90% RH or less (No Condensation) | |
| Storage Temperature | -10 to +50 | (Note 2) |
| Storage Humidity Range | Relative humidity 90% RH or less (No Condensation) | (Note 2) |
| Compatible FPC Specifications | t = 0.12 0.02mm, Gold Plated |
| Part No. | HRS No. | No. of Pos. | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | Purchase Unit |
| FH64MA-5S-0.25SHW(##) | CL0580-4643-0-## | 5 | 3.2 | 2.0 | 1.0 | 0.5 | 2.73 | 5,000pcs per reel / 500pcs per reel |
| FH64MA-7S-0.25SHW(##) | CL0580-4610-0-## | 7 | 3.7 | 2.5 | 1.5 | 1.0 | 3.23 | |
| FH64MA-9S-0.25SHW(##) | Under Planning (Note) | 9 | 4.2 | 3.0 | 2.0 | 1.5 | 3.73 | |
| FH64MA-11S-0.25SHW(##) | CL0580-4612-0-## | 11 | 4.7 | 3.5 | 2.5 | 2.0 | 4.23 | |
| FH64MA-13S-0.25SHW(##) | Under Planning (Note) | 13 | 5.2 | 4.0 | 3.0 | 2.5 | 4.73 | |
| FH64MA-15S-0.25SHW(##) | CL0580-4608-0-## | 15 | 5.7 | 4.5 | 3.5 | 3.0 | 5.23 | |
| FH64MA-17S-0.25SHW(##) | Under Planning (Note) | 17 | 6.2 | 5.0 | 4.0 | 3.5 | 5.73 | |
| FH64MA-19S-0.25SHW(##) | CL0580-4616-0-## | 19 | 6.7 | 5.5 | 4.5 | 4.0 | 6.23 | |
| FH64MA-21S-0.25SHW(##) | Under Planning (Note) | 21 | 7.2 | 6.0 | 5.0 | 4.5 | 6.73 | |
| FH64MA-23S-0.25SHW(##) | Under Planning (Note) | 23 | 7.7 | 6.5 | 5.5 | 5.0 | 7.23 | |
| FH64MA-25S-0.25SHW(##) | CL0580-4642-0-## | 25 | 8.2 | 7.0 | 6.0 | 5.5 | 7.73 | |
| FH64MA-31S-0.25SHW(##) | Under Planning (Note) | 31 | 9.7 | 8.5 | 7.5 | 7.0 | 9.23 |
| Part No. | HRS No. | No. of Pos. | B (mm) | C (mm) | D (mm) |
| FH64MA-5S-0.25SHW(##) | CL0580-4643-0-## | 5 | 2.0 | 1.0 | 0.5 |
| FH64MA-7S-0.25SHW(##) | CL0580-4610-0-## | 7 | 2.5 | 1.5 | 1.0 |
| FH64MA-9S-0.25SHW(##) | Under Planning (Note) | 9 | 3.0 | 2.0 | 1.5 |
| FH64MA-11S-0.25SHW(##) | CL0580-4612-0-## | 11 | 3.5 | 2.5 | 2.0 |
| FH64MA-13S-0.25SHW(##) | Under Planning (Note) | 13 | 4.0 | 3.0 | 2.5 |
| FH64MA-15S-0.25SHW(##) | CL0580-4608-0-## | 15 | 4.5 | 3.5 | 3.0 |
| FH64MA-17S-0.25SHW(##) | Under Planning (Note) | 17 | 5.0 | 4.0 | 3.5 |
| FH64MA-19S-0.25SHW(##) | CL0580-4616-0-## | 19 | 5.5 | 4.5 | 4.0 |
| FH64MA-21S-0.25SHW(##) | Under Planning (Note) | 21 | 6.0 | 5.0 | 4.5 |
| FH64MA-23S-0.25SHW(##) | Under Planning (Note) | 23 | 6.5 | 5.5 | 5.0 |
| FH64MA-25S-0.25SHW(##) | CL0580-4642-0-## | 25 | 7.0 | 6.0 | 5.5 |
| FH64MA-31S-0.25SHW(##) | Under Planning (Note) | 31 | 8.5 | 7.5 | 7.0 |
| Part No. | HRS No. | No. of Pos. | C (mm) | D (mm) | F (mm) | G (mm) |
| FH64MA-5S-0.25SHW(##) | CL0580-4643-0-## | 5 | 1.0 | 0.5 | 2.7 | 1.68 |
| FH64MA-7S-0.25SHW(##) | CL0580-4610-0-## | 7 | 1.5 | 1.0 | 3.2 | 2.18 |
| FH64MA-9S-0.25SHW(##) | Under Planning (Note) | 9 | 2.0 | 1.5 | 3.7 | 2.68 |
| FH64MA-11S-0.25SHW(##) | CL0580-4612-0-## | 11 | 2.5 | 2.0 | 4.2 | 3.18 |
| FH64MA-13S-0.25SHW(##) | Under Planning (Note) | 13 | 3.0 | 2.5 | 4.7 | 3.68 |
| FH64MA-15S-0.25SHW(##) | CL0580-4608-0-## | 15 | 3.5 | 3.0 | 5.2 | 4.18 |
