The FH30 Series connectors are compact, low-profile Flexible Printed Circuit (FPC) ZIF connectors designed for reliable FPC insertion and retention. Featuring a rotating Flip-Lock actuator and tabs for precise FPC positioning, these connectors ensure a secure mechanical and electrical connection. They are suitable for standard 0.3mm thick FPCs and offer easy solderability on PC boards with leads on 0.6mm or 0.8mm pitch. The flat upper surface and tape and reel packaging facilitate automated placement, making them ideal for high-volume manufacturing.
| Item | Specification | Conditions |
|---|---|---|
| Current Rating | 0.15 A (0.3mm pitch) / 0.3 A (0.4mm pitch) | When passing the current through all of the contacts, use 70% of the rated current. |
| Voltage Rating | 30 Vrms AC (0.3mm pitch) / 50 Vrms AC (0.4mm pitch) | |
| Insulation Resistance | 500 M min. | |
| Withstanding Voltage | No flashover or insulation breakdown | 0.3 mm pitch: 90 Vrms AC / 1 minute 0.4mm pitch: 150 Vrms AC / 1 minute |
| Contact Resistance | 150 m max. | * Including FPC conductor resistance |
| Durability | Contact resistance: 150 m max. No damage, cracks, or parts dislocation | 20 cycles |
| Vibration | No electrical discontinuity of 1s or longer Contact resistance: 150 m max. No damage, cracks, or parts dislocation | Frequency: 10 to 55 Hz, single amplitude of 0.75 mm (10 cycles in each of the 3 directions) |
| Shock | No electrical discontinuity of 1s or longer Contact resistance: 150 m max. No damage, cracks, or parts dislocation | Acceleration of 981m/s, 6 ms duration, sine half-wave, 3 cycles in each of the 3 axis |
| Humidity (Steady state) | Contact resistance: 150 m max. Insulation resistance: 50M min. No damage, cracks, or parts dislocation | 96 hours at 40C and humidity of 90 to 95% |
| Temperature cycle | Contact resistance: 150 m max. Insulation resistance: 50M min. No damage, cracks, or parts dislocation | Temperature: -40C +15C to 35C +85C+15C to 35C Time: -30 2 to 3 +30 +2 to 3 (5 cycles) |
| Resistance to soldering heat | No deformation of components affecting performance. | Reflow: At the recommended temperature profile Manual soldering: 350C for 5 seconds |
| Operating Temperature Range | -40 to +85C | (Note 2: Includes temperature rise caused by current flow) |
| Operating Humidity Range | Relative humidity 90% max. (No condensation) | |
| Storage Temperature Range | -10 to +50C | (Note 3: Refers to products stored for a long period prior to mounting and use) |
| Storage Humidity Range | Relative humidity 90% max. (No condensation) |
