The FH28 Series FPC/FFC connectors offer a highly reliable connection with a robust structure, featuring multi-polarized connectors and reinforced body design for superior FPC/FFC retention. The flip lock mechanism simplifies operation, providing a clear tactile click upon successful mating. These connectors are designed for 0.3mm thick FPC/FFC, support automatic pick-n-place mounting, and are halogen-free, complying with IEC61249-2-21 standards. Available in 0.5mm and 1mm pitch with a 2.55mm height, they are suitable for a wide range of applications requiring secure and dependable interconnects.
| Item | Specification | Conditions | Notes |
| Rated Current | 0.5A | When energizing rated current to all contacts, use 70% of rated current. | Note 1: Use 70% of rated current when energizing all contacts. |
| Rated Voltage | AC 50Vrms | ||
| Operating Temperature Range | -40 to +105C | Includes temperature rise caused by current flow. | Note 2: Includes temperature rise caused by current flow. |
| Operating Humidity Range | Relative humidity 90% or less | No condensation should be present. | |
| Storage Temperature Range | -10 to +50C | Refers to products stored for a long period prior to board mounting and use. | Note 3: Refers to products stored for a long period prior to board mounting and use. |
| Storage Humidity Range | Relative humidity 90% or less | No condensation should be present. | |
| Adaptive FPC/FFC Contact Thickness | 0.3 0.05 mm | ||
| Durability | 20 mating cycles | ||
| Contact Resistance | Maximum of 50m | Measured at 1mA (DC or 1,000Hz) | *Including FPC/FFC conductor resistance |
| Insulation Resistance | Minimum of 500M | Measured with DC 100V | No flashover or breakdown |
| Withstanding Voltage | AC 150Vrms | Applied for 1 minute. | No flashover or breakdown |
| Vibration Resistance | Contact Resistance: Max 50m, Insulation Resistance: Min 50M | Frequency: 10 to 55Hz, Single amplitude of 0.75mm for 10 cycles in 3 axial directions | No electric discontinuity of 1s or greater, No damaged, cracked or looseness of parts |
| Shock Resistance | Contact Resistance: Max 50m, Insulation Resistance: Min 50M | Acceleration of 981m/s, 6ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis | No damaged, cracked or looseness of parts |
| Humidity Resistance of Steady State | Contact Resistance: Max 50m, Insulation Resistance: Min 50M | 96 hours at temperature: 40C and humidity: 90 to 95% | No damaged, cracked or looseness of parts |
| Temperature Cycles | Contact Resistance: Max 50m, Insulation Resistance: Min 50M | -40/+105C, 5 cycles | No damaged, cracked or looseness of parts |
| Solder Heat Resistance | Contact Resistance: Max 50m | Reflow: according to Recommended Temperature Profile; Hand solder: 350 5C for 5 seconds | No damaged, cracked or looseness of parts |
