The FH35C Series is a 0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector designed for high-speed transmission and enhanced FPC retention. It offers design flexibility by utilizing both top and bottom contacts and supports high-speed data rates due to its excellent impedance characteristics, compatible with eDP (ver1.3) and MIPI (D-PHY) specifications. The connector is delivered with the actuator open for reduced installation time and cost, and features tapered guides for easy FPC insertion. It is compatible with 0.2mm thick FPC and includes bottom side protection. The FH35C Series is halogen-free and available in tape-and-reel packaging for automatic mounting.
| Items | Specifications | Conditions |
| Insulation Resistance | No less than 50 M | Measured at 100 V DC |
| Withstand Voltage | No flashover or breakdown | 90 V AC for one minute |
| Contact Resistance | 100 m MAX. * Including FPC conductor resistance | AC 20 mV MAX (1 KHz), 1 mA |
| Mating Cycles | Contact resistance: no more than 100 m; No breakage, cracks, or loosened parts | 10 times |
| Vibration Resistance | Contact resistance: no more than 100 m; No breakage, cracks, or loosened parts; No electric outage of 1 s or greater | At the frequency of 10-55 Hz, half amplitude 0.75 mm, and 10 cycles in each of three axial directions |
| Shock Resistance | Contact resistance: no more than 100 m; No breakage, cracks, or loosened parts; No electric outage of 1 s or greater | Acceleration: 981 m/s; Duration: 6 ms, sine half-wave, 3 cycles in each of the 3 axis each in both directions |
| Humidity Resistance (Steady State) | Contact resistance: no more than 100 m; Insulation Resistance: 50 M or more; No breakage, cracks, or loosened parts | Left to stand for 96 hours at the temperature of 40C and the humidity of 90% to 95% |
| Temperature Cycles | Contact resistance: no more than 100 m; Insulation Resistance: 50 M or more; No breakage, cracks, or loosened parts | Temperature: -55 +15 to+35 +85 +15 to +35C; Time: 30 2 to 3 30 2 to 3 minutes; 5 cycles with the above conditions |
| Solder Heat Resistance | No deformation in appearance or marked instability of contacts | Reflow: According to the Recommended Temperature Profile; Manual soldering: 35010C for 51 sec. |
| Items | Speci cations | Conditions |
| Current rating | 0.2 A (Note 1) | |
| Voltage rating | AC 30 Vrms | |
| Operating temperature Range | 55 to +85C (Note 2) | 90% or less of relative humidity (No dew condensation is allowed) |
| Storage temperature Range | -10 to +50C (Note 3) | 90% or less of relative humidity (No dew condensation is allowed) |
| FPC contacts | t = 0.2 0.03 gold plating |
| Part | Materials | Treatment | UL Regulation |
| Insulator | LCP | Gray UL94V-0 | |
| Insulator | Polyamide resin | Black | |
| Contact | Phosphor bronze | Nickel barrier Gold plating | |
| Metal fitting | Phosphor bronze | Pure tin re ow plating |
| Product No. | HRS No. | Number of contacts | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) |
| FH35C-9S-0.3SHW(50) | CL580-2910-5-50 | 9 | 4.3 | 1.8 | 2.4 | 3.03 | 3.73 |
| FH35C-11S-0.3SHW(50) | CL580-2917-4-50 | 11 | 4.9 | 2.4 | 3 | 3.63 | 4.33 |
| FH35C-13S-0.3SHW(50) | CL580-2925-2-50 | 13 | 5.5 | 3 | 3.6 | 4.23 | 4.93 |
| FH35C-15S-0.3SHW(50) | CL580-2919-0-50 | 15 | 6.1 | 3.6 | 4.2 | 4.83 | 5.53 |
| FH35C-17S-0.3SHW(50) | CL580-2916-1-50 | 17 | 6.7 | 4.2 | 4.8 | 5.43 | 6.13 |
| FH35C-19S-0.3SHW(50) | CL580-2921-1-50 | 19 | 7.3 | 4.8 | 5.4 | 6.03 | 6.73 |
| FH35C-21S-0.3SHW(50) | CL580-2922-4-50 | 21 | 7.9 | 5.4 | 6 | 6.63 | 7.33 |
| FH35C-23S-0.3SHW(50) | CL580-2911-8-50 | 23 | 8.5 | 6 | 6.6 | 7.23 | 7.93 |
| FH35C-25S-0.3SHW(50) | CL580-2912-0-50 | 25 | 9.1 | 6.6 | 7.2 | 7.83 | 8.53 |
| FH35C-27S-0.3SHW(50) | CL580-2918-7-50 | 27 | 9.7 | 7.2 | 7.8 | 8.43 | 9.13 |
| FH35C-31S-0.3SHW(50) | CL580-2923-7-50 | 31 | 10.9 | 8.4 | 9 | 9.63 | 10.33 |
| FH35C-33S-0.3SHW(50) | CL580-2913-3-50 | 33 | 11.5 | 9 | 9.6 | 10.23 | 10.93 |
| FH35C-35S-0.3SHW(50) | CL580-2926-5-50 | 35 | 12.1 | 9.6 | 10.2 | 10.83 | 11.53 |
| FH35C-37S-0.3SHW(50) | CL580-2914-6-50 | 37 | 12.7 | 10.2 | 10.8 | 11.43 | 12.13 |
| FH35C-39S-0.3SHW(50) | CL580-2915-9-50 | 39 | 13.3 | 10.8 | 11.4 | 12.03 | 12.73 |
| FH35C-41S-0.3SHW(50) | CL580-2924-0-50 | 41 | 13.9 | 11.4 | 12 | 12.63 | 13.33 |
| FH35C-45S-0.3SHW(50) | CL580-2909-6-50 | 45 | 15.1 | 12.6 | 13.2 | 13.83 | 14.53 |
| FH35C-49S-0.3SHW(50) | 49 | 16.3 | 13.8 | 14.4 | 15.03 | 15.73 | |
| FH35C-51S-0.3SHW(50) | CL580-2920-9-50 | 51 | 16.9 | 14.4 | 15 | 15.63 | 16.33 |
| Product No. | HRS No. | No. of Contacts | B (mm) | C (mm) |
| FH35C-9S-0.3SHW(50) | CL580-2910-5-50 | 9 | 1.8 | 2.4 |
| FH35C-11S-0.3SHW(50) | CL580-2917-4-50 | 11 | 2.4 | 3 |
| FH35C-13S-0.3SHW(50) | CL580-2925-2-50 | 13 | 3 | 3.6 |
| FH35C-15S-0.3SHW(50) | CL580-2919-0-50 | 15 | 3.6 | 4.2 |
| FH35C-17S-0.3SHW(50) | CL580-2916-1-50 | 17 | 4.2 | 4.8 |
| FH35C-19S-0.3SHW(50) | CL580-2921-1-50 | 19 | 4.8 | 5.4 |
| FH35C-21S-0.3SHW(50) | CL580-2922-4-50 | 21 | 5.4 | 6 |
| FH35C-23S-0.3SHW(50) | CL580-2911-8-50 | 23 | 6 | 6.6 |
| FH35C-25S-0.3SHW(50) | CL580-2912-0-50 | 25 | 6.6 | 7.2 |
| FH35C-27S-0.3SHW(50) | CL580-2918-7-50 | 27 | 7.2 | 7.8 |
| FH35C-31S-0.3SHW(50) | CL580-2923-7-50 | 31 | 8.4 | 9 |
| FH35C-33S-0.3SHW(50) | CL580-2913-3-50 | 33 | 9 | 9.6 |
| FH35C-35S-0.3SHW(50) | CL580-2926-5-50 | 35 | 9.6 | 10.2 |
| FH35C-37S-0.3SHW(50) | CL580-2914-6-50 | 37 | 10.2 | 10.8 |
| FH35C-39S-0.3SHW(50) | CL580-2915-9-50 | 39 | 10.8 | 11.4 |
| FH35C-41S-0.3SHW(50) | CL580-2924-0-50 | 41 | 11.4 | 12 |
| FH35C-45S-0.3SHW(50) | CL580-2909-6-50 | 45 | 12.6 | 13.2 |
| FH35C-49S-0.3SHW(50) | 49 | 13.8 | 14.4 | |
| FH35C-51S-0.3SHW(50) | CL580-2920-9-50 | 51 | 14.4 | 15 |
