The Powerpole PP15/45 series represents the smallest Powerpole housings, designed for versatile wire-to-wire and wire-to-board applications. These connectors accommodate wire sizes from 20 to 10 AWG (0.75 to 6 mm) and offer power capabilities up to 55 amps per pole. Key features include finger-proof housings for enhanced safety and the option to incorporate first-mate last-break ground connectors. Their compact footprint delivers high power density, making them suitable for a wide range of demanding electrical connections.
| Feature | Specification | Details |
|---|---|---|
| Power Rating | Up to 55 Amps per pole | (Based on wire size and temperature derating) |
| Wire Size Range | 20 to 10 AWG (0.75 to 6 mm) | |
| Voltage Rating | 600V AC/DC (UL 1977) | |
| Mating Cycles | Up to 10,000 (Silver Plated) | 1,500 (Tin Plated) |
| Operating Temperature | -20C to 105C (-4F to 221F) | (Housings & Pak Shells) |
| Housing Configurations | Standard, Finger Proof, Chemical Resistant (CR), Ground | |
| Contact Types | Wire Contacts (Open Barrel, Closed Barrel), PCB Contacts (Right Angle, Vertical) | |
| Ground Connector | First-mate last-break capability | |
| Finger Proof | Yes (Specific Housings) | Meets UL1977 section 10.2, rated IP20. Will not mate with standard housings. |
| Chemical Resistant Housings | Available | Same dimensions as standard PP15/45. |
| Ultrasonically Bonded Assemblies | Available for 1x2, 1x3, 2x1, 2x2 configurations | Creates a one-piece connector unit. |
| Powerpole Pak Connectors | Encloses stacked PP15/45 housings | Available in inline, panel mount, and blindmate configurations. Optional latching and strain relief. |
| Blindmate Pak Connector | Compensates for up to 0.45 in. (11.43 mm) misalignment | Suitable for panel-to-panel, bulkhead-to-bulkhead, or rack mount applications. |
| T Pak Connector | 2-way electrical splitter | Splits current from one incoming circuit into two outgoing circuits. Standard configuration pre-wired for AC 3 phase, 3 wire plus ground. |
| Accessories | Mounting Staples, Spacers, Retaining Pins, Mounting Clamps, Retention Clips, Block Locks, Splash Boots, Dust Covers | |
| Crimp Tools | Anderson Applicator + Press, Hand Tools | Specific tools for reeled and loose piece contacts. |
