3M CP2 HB110 GA1 KR Press Fit Header with Glass Filled Polyester Insulation and Three Contact Levels
Manufacturer:
3M
Description:
Hard Metric, Standard RoHS
Category:
Backplane Connector Accessories/Hard Metric, Standard
Specifications
Mfr. Part #:
CP2-HB110-GA1-KR
Model Number:
CP2-HB110-GA1-KR
Introduction
Product Overview
The 3M CP2 Press-Fit Header, 2 mm Type B, is designed for high signal density applications with its 2 mm grid spacing. It features an "Eye of the Needle" compliant pin press-fit design to reduce manufacturing time and cost. The header offers three contact mating levels for Early Mate Late Break or "Hot Swap" capabilities, and feed-through termination for midplane applications. Additional grounding rows are available for enhanced ground bounce and EMI immunity. This header mates with 5-row 3M HSHM, UHM, and CP2 Sockets and is end-to-end stackable with various 5-row 3M headers.
Product Attributes
- Brand: 3M
- Product Series: CP2 Series
- Contact Type: Press-Fit Header
- Grid Spacing: 2 mm
- Insulation Material: Glass Filled Polyester (PBT)
- Contact Material: Copper Alloy
- Flammability: UL94V-0
- Compliance: RIA E1 & C1 apply (Refer to Regulatory Information Appendix for RoHS compliance)
Technical Specifications
| Specification | Details |
|---|---|
| Product Variants | 95, 110, and 125 Signal Contacts |
| Basic System Unit | 25 mm |
| Module Size | 38, 44, and 50 mm |
| Mating Force | ≤ 0.75 N/PIN |
| Withdrawal Force | ≥ 0.15 N/PIN |
| Mating and Un-mating Operations | 200 for KR plating |
| Current Rating | 1.0 Amperes at 70°C (with all contacts powered) |
| Contact Resistance | ≤ 20 mΩ |
| Insulation Resistance | ≥ 10,000 MΩ |
| Test Voltage | 750 VACRMS |
| Temperature Ratings | -55°C to +125°C |
| Recommended PCB Plated Through Hole | Ø 0.6±0.05 mm |
| Drill Hole Diameter | Ø 0.7±0.02 mm |
| PCB Thickness (3.7 mm tails) | 2.4 - 5.6 mm |
| PCB Thickness (2.3 mm tails) | 1.4 - 5.6 mm |
| Press-In Force | ≤ 204 N/pin (on nominal hole diameter) |
| Retention Force | ≥ 13.5 N/pin (on nominal hole diameter) |
| Plating Options | FJ, KR, KV |
| Primary Tail Length Options | 1= 3.7 mm, 2= 2.3 mm, 4= 15.8 mm |
| Grounding Options | G= with ground pins, Blank= without ground pins |
2410301807_3M-CP2-HB110-GA1-KR_C3652257.pdf
Send RFQ
Stock:
MOQ:
