Connector 3M CP2 HA110 GA1 KR Press Fit Header With 110 Signal Contacts And 2 Millimeter Grid Pitch
Manufacturer:
3M
Description:
Hard Metric, Standard RoHS
Category:
Backplane Connector Accessories/Hard Metric, Standard
Specifications
Mfr. Part #:
CP2-HA110-GA1-KR
Model Number:
CP2-HA110-GA1-KR
Introduction
Product Overview
The 3M CP2 Press-Fit Header 2 mm Type A offers 110 signal contacts within its CP2 Series, designed for high signal density at a low cost due to its 2 mm grid spacing. It features an "Eye of the Needle" compliant pin press-fit design that reduces manufacturing time and cost. The header supports three contact mating levels for Early Mate Late Break or "Hot Swap" applications, and offers feed-through termination for midplane applications. Additional grounding rows are available for improved ground bounce and EMI immunity. This header is end-to-end stackable with 5-row 3M HSHM, HM, and CP2 Headers and mates with 5-row 3M HSHM, UHM, and CP2 Sockets.
Product Attributes
- Brand: 3M
- Product Line: CP2 Series
- Contact Type: Press-Fit Header
- Grid Spacing: 2 mm
- Signal Contacts: 110
- Mating Levels: 3 (for Early Mate Late Break or "Hot Swap")
- Termination: Feed-through available
- Grounding: Additional grounding rows available
- Compliance: RIA E1 & C1 apply (refer to www.3Mconnectors.com for Regulatory Information Appendix)
- Insulation Material: Glass Filled Polyester (PBT)
- Contact Material: Copper Alloy
- Flammability: UL94V-0
Technical Specifications
| Specification | Details |
|---|---|
| System Unit | 25 mm |
| Module | 50 mm |
| Mating Force | ≤ 0.75N/PIN |
| Withdrawal Force | ≥ 0.15N/PIN |
| Mating and Un-mating Operations | 200 (for KR plating) |
| Current Rating | 1.0 Amperes at 70°C (with all contacts powered) |
| Contact Resistance | ≤ 20 mΩ |
| Insulation Resistance | ≥ 10,000 MΩ |
| Test Voltage | 750 VACRMS |
| Temperature Ratings | -55°C to +125°C |
| Recommended PCB Plated Through Hole Diameter | Ø 0.6±0.05 mm |
| Drill Hole Diameter | Ø 0.7±0.02 mm |
| PCB Thickness (3.7 mm tails) | 2.4 - 5.6 mm |
| PCB Thickness (2.3 mm tails) | 1.4 - 5.6 mm |
| Press-In Force | ≤ 204N/pin (on nominal hole diameter) |
| Retention Force | ≥ 13.5N/pin (on nominal hole diameter) |
| Plating Options | FJ, KR, KV |
| Primary Tail Length Options | 1 (3.7 mm), 2 (2.3 mm), 4 (15.8 mm) |
| Grounding Options | G (with ground pins), Blank (without ground pins) |
2411261605_3M-CP2-HA110-GA1-KR_C3648798.pdf
Send RFQ
Stock:
MOQ:
