3M CP2 HA110 GC1 KR Electrical Connector Press Fit Header with 110 Signal Contacts 2 Millimeter Pitch
Product Overview
The 3M CP2 Press-Fit Header, 2 mm Type A, offers a high signal density solution with 110 signal contacts. Designed for efficiency, its "Eye of the Needle" compliant pin press-fit technology reduces manufacturing time and cost. Featuring three contact mating levels for Early Mate Late Break or "Hot Swap" applications, it also provides options for feed-through termination and additional grounding rows for improved ground bounce and EMI immunity. This header is end-to-end stackable and mates with 3M HSHM, UHM, and CP2 Sockets, making it suitable for various interconnect applications.
Product Attributes
- Brand: 3M
- Product Line: CP2 Series
- Contact Type: Press-Fit Header
- Grid Spacing: 2 mm
- Compliance: RIA E1 & C1 apply (See Regulatory Information Appendix)
- Date Modified: August 5, 2015
Technical Specifications
| Specification | Details |
|---|---|
| System Unit | 25 mm |
| Module | 50 mm |
| Signal Contacts | 110 |
| Insulation Material | Glass Filled Polyester (PBT) |
| Flammability | UL94V-0 |
| Contact Material | Copper Alloy |
| Mating Force | ≤ 0.75N/PIN |
| Withdrawal Force | ≥ 0.15N/PIN |
| Mating/Un-mating Operations | 200 (for KR plating) |
| Current Rating | 1.0 Amperes at 70C (with all contacts powered) |
| Contact Resistance | ≤ 20 mΩ |
| Insulation Resistance | ≥ 10,000 MΩ |
| Test Voltage | 750 VACRMS |
| Temperature Ratings | -55°C to +125°C |
| Recommended PCB Plated Through Hole Diameter | Ø 0.6 ±0.05 mm |
| Drill Hole Diameter | Ø 0.7 ±0.02 mm |
| PCB Thickness (3.7 mm tails) | 2.4 - 5.6 mm |
| PCB Thickness (2.3 mm tails) | 1.4 - 5.6 mm |
| Press-In Force | ≤ 204N/pin (on nominal hole diameter) |
| Retention Force | ≥ 13.5N/pin (on nominal hole diameter) |
Ordering Information
Part Number Structure: CP2-HA110-XXX-XXXX
Loading Configurations: Available (See diagrams on following pages)
Grounding Options: G= with ground pins, Blank= without ground pins
EMLB Patterns: Available
Primary Tail Length Options:
- 1= 3.7 mm
- 2= 2.3 mm
- 4= 15.8 mm
Plating Options:
- FJ: 10~20 μ" Gold Contact Area, 100~200 μ" Matte Tin, 50~80 μ" Nickel Underplate (RIA E1 & C1 apply)
- KR: 30~40 μ" Gold Contact Area, 100~200 μ" Matte Tin, 50~80 μ" Nickel Underplate (RIA E1 & C1 apply)
- KV: 30-40 u" Mate End Gold Contact area, Gold Flash Tail Contact area, 50-80 u" Nickel Underplate (RIA E1 & C1 apply) - For Primary Tail Length Option 4 only
Recommended PCB Layout: Provided for Part Number descriptive definitions. Contact local sales representative for custom configurations.
2411261605_3M-CP2-HA110-GC1-KR_C3641266.pdf
