3M CP2-HA110-GF1-KR Press Fit Header 2 mm Type A Offering High Signal Density and 110 Signal Contacts
3M CP2 Press-Fit Header 2 mm Type A 110 Signal Contacts
The 3M CP2 Press-Fit Header, 2 mm Type A, offers high signal density at a low cost with its 2 mm grid spacing. Featuring an "Eye of the Needle" compliant pin press-fit design, it reduces manufacturing time and cost. This header is designed for applications requiring early mate/late break or "hot swap" functionality with its three contact mating levels. Additional grounding rows are available for improved ground bounce and EMI immunity. It is end-to-end stackable with 5-row 3M HSHM, HM, and CP2 Headers and mates with 5-row 3M HSHM, UHM, and CP2 Sockets. Feed-through termination is available for midplane applications.
Product Attributes
- Brand: 3M
- Product Series: CP2 Series
- Compliance: RIA E1 & C1 apply (See Regulatory Information Appendix in "RoHS compliance" section of www.3Mconnectors.com)
- Date Modified: August 5, 2015
Technical Specifications
| Specification | Details |
|---|---|
| System Unit | 25 mm |
| Module | 50 mm |
| Grid Spacing | 2 mm |
| Insulation Material | Glass Filled Polyester (PBT) |
| Insulation Flammability | UL94V-0 |
| Contact Material | Copper Alloy |
| Mating Force | ≤ 0.75N/PIN |
| Withdrawal Force | ≥ 0.15N/PIN |
| Mating/Un-mating Operations | 200 (for KR plating) |
| Current Rating | 1.0 Amperes at 70°C (with all contacts powered) |
| Contact Resistance | ≤ 20 mΩ |
| Insulation Resistance | ≥ 10,000 MΩ |
| Test Voltage | 750 VACRMS |
| Temperature Ratings | -55°C to +125°C |
| Recommended PCB Plated Through Hole Diameter | Ø 0.6±0.05 mm |
| Drill Hole Diameter | Ø 0.7±0.02 mm |
| PCB Thickness (3.7 mm tails) | 2.4 - 5.6 mm |
| PCB Thickness (2.3 mm tails) | 1.4 - 5.6 mm |
| Press-In Force | ≤ 204N/pin (on nominal hole diameter) |
| Retention Force | ≥ 13.5N/pin (on nominal hole diameter) |
Ordering Information Structure
Part Number Format: CP2-HA110-XXX-XXXX
- Loading Configurations: See diagrams on following pages.
- Grounding Options: G = with ground pins, Blank = without ground pins.
- EMLB Patterns: (Refer to diagrams for specific configurations)
- Primary Tail Length: 1 = 3.7 mm, 2 = 2.3 mm, 4 = 15.8 mm.
- Plating Options:
- FJ: 10~20 μ" Gold Contact Area, 100~200 μ" Matte Tin, 50~80 μ" Nickel Underplate (RIA E1 & C1 apply)
- KR: 30~40 μ" Gold Contact Area, 100~200 μ" Matte Tin, 50~80 μ" Nickel Underplate (RIA E1 & C1 apply)
- KV: 30-40 μ" Mate End Gold Contact area, Gold Flash Tail Contact area, 50-80 μ" Nickel Underplate (RIA E1 & C1 apply) - For Primary Tail Length Option 4 only.
Recommended PCB Layout
Diagrams on following pages serve for Part Number descriptive definitions. Please contact your local sales representative for customer-specific product configurations.
Note: Unless otherwise noted, references to industry specifications are intended to indicate substantial compliance. Such references should not be construed as a guarantee of compliance to all requirements.
2411261605_3M-CP2-HA110-GF1-KR_C20265400.pdf
