3M CP2-SA110-1-FJ Socket Featuring 110 Signal Contacts and High Temperature Thermoplastic Insulation
Manufacturer:
3M
Description:
Arrays, Edge Type, Mezzanine (Board to Board) RoHS
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Arrays, Edge Type, Mezzanine (Board to Board)
Specifications
Mfr. Part #:
CP2-SA110-1-FJ
Model Number:
CP2-SA110-1-FJ
Introduction
Product Overview
The 3M CP2 Press-Fit Socket 2 mm Type A 110 Signal Contacts Right Angle is part of the CP2 Series, designed according to IEC 61076-4-101 and IEC 60352-5 Standards. Its 2 mm grid spacing facilitates high signal density at a low cost. The "Eye of the Needle" compliant pin press-fit design aims to reduce manufacturing time and cost. An additional grounding row is available for enhanced ground bounce and EMI immunity. This socket mates with 5-row 3M HM and CP2 Headers and is end-to-end stackable with 5-row 3M HSHM, UHM, and CP2 Sockets.
Product Attributes
- Brand: 3M
- Series: CP2 Series
- Contact Type: 110 Signal Contacts
- Configuration: Right Angle
- Grid Spacing: 2 mm
- System Unit: 25 mm
- Module: 50 mm
- Standards Compliance: IEC 61076-4-101, IEC 60352-5
- Press-Fit Design: "Eye of the Needle" compliant pin
- Grounding: Additional grounding row available
- Stackability: End-to-end stackable with specified 3M sockets
- Insulation Material: High Temperature Thermoplastic (LCP)
- Contact Material: Copper Alloy
- Flammability: UL94V-0
- Plating Options: FJ, KR (See Ordering Information for details)
- Shield Options: G (Upper Shield), Blank (No Shield)
Technical Specifications
| Specification | Details |
|---|---|
| Mating Force | ≤ 0.75N/PIN |
| Withdrawal Force | ≥ 0.15N/PIN |
| Mating and Un-mating Operations | 200 (for KR plating) |
| Current Rating | 1.0 Amperes at 70C (with all contacts powered) |
| Contact Resistance | ≤ 20 mΩ |
| Insulation Resistance | ≥ 10,000 MΩ |
| Test Voltage | 750 VACRMS |
| Temperature Ratings | -55C to +125C |
| Recommended PCB Plated Through Hole Diameter | Ø 0.6±0.05 mm |
| Drill Hole Diameter | Ø 0.7±0.02 mm |
| PCB Thickness | 1.4 - 4.2 mm |
| Press-In Force | ≤ 204N/pin (on nominal hole diameter) |
| Retention Force | ≥ 13.5N/pin (on nominal hole diameter) |
2411261605_3M-CP2-SA110-1-FJ_C3649881.pdf
Send RFQ
Stock:
MOQ:
