CAT6 modular jack Amphenol RJE59-188-5411 with visual link activity indicators and enhanced EMI shielding
Manufacturer:
Amphenol
Description:
1 Shielded With LED Through Hole Modular/Ethernet Connector Jacks RoHS
Category:
Modular/Ethernet Connector Adapters/Modular/Ethernet Connector Jacks
Specifications
Connector Type:
-
Number Of Ports:
1
Shielding:
有屏蔽
LED:
带LED
Mfr. Part #:
RJE59-188-5411
Package:
Through Hole
Model Number:
RJE59-188-5411
Introduction
Product Overview
The Amphenol RJE59 series of modular jacks are designed for high-performance networking applications. These connectors meet CAT6 performance standards per EIA-568-C.2, supporting Gigabit Ethernet protocols and 10Gig links up to 50 meters. Available in single-port configurations with various LED and shielding options, the RJE59 series offers enhanced EMI performance and visual indicators for link activity and network speed verification. They are suitable for a wide range of industrial, consumer, medical, data, and networking/telecom applications, including support for PoE, PoE+, and PoE++.
Product Attributes
- Brand: Amphenol
- Product Series: RJE59
- RoHS Compliant: Yes
- IP Rating: IP20 rated per IEC 60529
- Certifications: UL File #: E135615
- Insulator Material: High temperature thermoplastic, complies with UL 94V-0
- Contact Material: Phosphor Bronze hard temper with gold thickness options (6, 15 30, 50) over 50 minimum Nickel on contact mating area
- Solder Tail Plating: -100 minimum matte Tin plating on solder tails
- Shield Material: Stainless Steel with Tin dipped tails
- LED Tail Plating: Tin plating on LED tails
Technical Specifications
| Specification | Details | ||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Contact Resistance | 20 m maximum | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Insulation Resistance | 500 M minimum at 500V DC for 2 minutes maximum | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Current Rating | 1.25 Amps per contact | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Voltage Rating | 125 Volts AC | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| DWV | 1000 VAC, 60 HZ. 1 min | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| LED Forward DC Current | 20 mA typical | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| LED Forward Voltage | 1.9 Volts max. @ 2mA (for single colours) 2.6 Volts max @ 20mA (for Bi-colours) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| LED Reverse Voltage | 5 Volts minimum | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| LED Light Intensity | 0.4 to 1.5 mcd @ 2mA (for single colours) 0.5 @ 2mA (for Bi-colours) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| LED Wavelength | Yellow: 587 7nm measured @20mA Green: 565 6nm measured @20mA Red: 625 5nm measured @ 20mA | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| PoE Support | Supports PoE, PoE+, and PoE++ per IEEE PoE standards | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mating Connector Insertion Force | 5.0 lbs maximum | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mating Connector Pull Retention Force | 20.0 lbs minimum | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Durability | 750 mating and unmating cycles for 50 gold plating | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Recommended Soldering Temperature | Wave soldering peaked at 260C for 5 seconds maximum for 1 cycle with an LED defect rate of no more than 1000ppm | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Operating Temperature | -40C to +85C | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| CAT 6 Characteristics (Frequency MHz) |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Available Part Numbers (Examples) |
|
2410311910_Amphenol-RJE59-188-5411_C599429.pdf
Send RFQ
Stock:
MOQ:
