6 Pin Receptacle Connector Amphenol AT04-6P-PM12 Featuring Thermoplastic Housing and IP67 Moisture Protection
Manufacturer:
Amphenol
Description:
3 -55℃~+125℃ 2 Non-Latching Rectangular Connector Housings RoHS
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Housings
Specifications
Number Of Rows:
3
Colour:
黑色
With Wings:
不带翅
Operating Temperature:
-55℃~+125℃
Number Of PINs Per Row:
2
Number Of Positions Or Pins:
2x3P
With Locker:
不带锁扣
Mfr. Part #:
AT04-6P-PM12
Model Number:
AT04-6P-PM12
Introduction
Product Overview
The AT04-6P-PM1X is a 6-pin AT Series receptacle with a flange and gasket, designed for robust connectivity. It is manufactured by Amphenol Sine Systems and is suitable for applications requiring reliable electrical connections. This receptacle is part of the A Series and is compatible with various Amphenol connector series, including AT, ATV, AHD-9, ARC, DuraMate, and PanelMate. It is RoHS compliant and offers a high level of moisture resistance (IP67 when mated).
Product Attributes
- Brand: Amphenol Sine Systems
- Series: AT Series, A Series
- Housing Material: Thermoplastic (Black)
- End Cap Material: Thermoplastic (Black)
- Strain Relief Cap Material: Thermoplastic (Black)
- Seal Material: Silicone Rubber (Red)
- Compliance: RoHS Compliant
- Origin: USA
Technical Specifications
| Specification/Model | Details |
|---|---|
| Part Number | AT04-6P-PM1X |
| Type | Receptacle, 6 Pin |
| Modifications | Flange, Gasket |
| Current Rating | 13 Amps |
| Operating Temperature | -55C to +125C |
| Dielectric Withstanding Voltage | Less than 2 milliamps current leakage @ 1500 Volts AC |
| Insulation Resistance | 1000 Megohms Min @ 25C |
| Moisture Resistance | IP67 (Mated Condition) |
| Mating Cycle Durability | 100 Cycles |
| Mating Part | AT06-6S* Plug (* = Modifications) |
| Contact Size | 16 |
| Standard Seal Wire Range | Min. Insul O.D.: 2.24 mm (.088 in) / Typical Wire Range: 14 - 20 AWG / Max. Insul O.D.: 3.68 mm (.145 in) |
| Reduced Diameter Seal Wire Range | Min. Insul O.D.: 1.35 mm (.053 in) / Typical Wire Range: 14 - 20 AWG / Max. Insul O.D.: 3.05 mm (.120 in) |
| Dimensions (Approximate) | Height: 55.5 mm, Width: 40.5 mm, Diameter: 26.7 mm |
| Mounting Hole Diameter | 5.6 mm |
| Contact Retention Wedge | AW6P Required |
| Attachment Option 1 | Hex washer head sheetmetal screw, #10, 1/2" long, hex size 5/16" |
| Attachment Option 2 | Self-thread screw for plastic (e.g., ST 4.8) |
| Model AT04-6P-PM11 | Seal: Standard, End Cap: No, Strain Relief Cap: No |
| Model AT04-6P-PM12 | Seal: Reduced Dia., End Cap: No, Strain Relief Cap: No |
| Model AT04-6P-PM13 | Seal: Standard, End Cap: Yes, Strain Relief Cap: No |
| Model AT04-6P-PM14 | Seal: Reduced Dia., End Cap: Yes, Strain Relief Cap: No |
| Model AT04-6P-PM15 | Seal: Standard, End Cap: No, Strain Relief Cap: Yes |
| Model AT04-6P-PM16 | Seal: Reduced Dia., End Cap: No, Strain Relief Cap: Yes |
2411220416_Amphenol-AT04-6P-PM12_C17196790.pdf
Send RFQ
Stock:
MOQ:
