Home > Products > Power Connectors >Power Connectors > power connector Anderson Power 6328G1 supporting 175 amperes and UL CSA certifications for industrial

power connector Anderson Power 6328G1 supporting 175 amperes and UL CSA certifications for industrial

Manufacturer:
Anderson Power
Description:
Power Connectors RoHS
Category:
Power Connectors/Power Connectors
Specifications
Mfr. Part #:
6328G1
Model Number:
6328G1
Introduction

Product Overview

The Anderson Power Products SB 175 Connector offers cost-effective reliability, design flexibility, and safety for product manufacturing, installation, and maintenance. This connector is available in 2 and 3-pole configurations with a 175-amp rating and 600 Volts continuous AC or DC operation. It supports a wide range of wire sizes from #4 to 1/0 AWG (21.1 to 53.5mm). Mechanical keys ensure proper mating of connectors of the same color, with different housing colors used to identify voltages and prevent system mismatching. The SB connectors are UL recognized and CSA certified.

Product Attributes

  • Brand: Anderson Power Products (APP)
  • Connector Series: SB 175
  • Certifications: UL Recognized Component, CSA Certified
  • Housing Material Flammability Rating: UL94 V-0
  • Contact System: Flat wiping contact system
  • Design: Genderless

Technical Specifications

Specification Value Details
Current Rating (UL) 175 Amperes * UL Rated for 65C largest wire or cable size
Voltage Ratings (UL) 600 Volts Continuous AC or DC operation
Life (Cycles) To 10,000 No load (Contact/Disconnect Cycles)
Hot Plug Cycles 250 cycles @ 120V Under Load (Hot Plug 250 cycles @ 120V) 75A
Contact Barrel Wire Size #4 to 1/0 AWG (21.1 to 53.5 mm)
Avg. Connection/Disconnect Force 25 lbf (SB 2 Pole)
Avg. Connection/Disconnect Force 35 lbf (SB 3 Pole)
Maximum Wire Insulation Diameter 0.75 inches (19.01 mm)
Operating Temperature Range -20 to 105C (-4 to 221F) ** Contact factory for higher temperature rated connector
AVG Contact Resistance 100 micro-ohms
Insulation Withstanding Test Voltage 2200 Volts AC/DC
Contact Retention Force 300 lbf
Pulse Current Capability See Graph
Temperature Rise at Constant Current See Graph

2 Pole Housing & 175 amp Contacts

Part Number Housing Color Wire AWG Wire sq. mm
6325G1 Gray 1/0 53.5
6326G1 Blue 1/0 53.5
6327G1 Orange 1/0 53.5
6328G1 Yellow 1/0 53.5
6329G1 Red 1/0 53.5
6325G5 Gray #2 33.6
6326G5 Blue #2 33.6
6327G5 Orange #2 33.6
6328G5 Yellow #2 33.6
6329G5 Red #2 33.6
6325G6 Gray #4 21.1
6326G6 Blue #4 21.1
6327G6 Orange #4 21.1
6328G6 Yellow #4 21.1
6329G6 Red #4 21.1

3 Pole Housing & 175 amp Contacts

Part Number Housing Color Wire AWG Wire sq. mm
6316 Gray 1/0 53.5
6316G9 Gray #1 42.4
6316G10 Gray #2 33.6

Housings Only

Part Number Description
940 Gray
941 Blue
942 Orange
943 Yellow
949 Red
2-7252G11 Black, no voltage key
902 Gray, springs & hardware (3 Pole Only)

175 amp Contacts

Part Number Description Wire AWG Wire sq. mm
944 Contact set (2) 1/0 53.5
1382 Individual 1/0 53.5
947 Contact set (2) #2 33.6
1383 Individual #2 33.6
948 Contact set (2) #4 21.2
1384 Individual #4 21.2
948G1* Contact set (2) #6 13.3
1348* Individual #6 13.3
944G1 Contact set (2) #1 42.4
1347 Individual #1 42.4
180BBS Bus bar contact N/A N/A

Accessories

Part Number Description
995G1 Handle, hardware & lock washers - Gray
995G3 Handle, hardware & lock washers - Red
923 Manual release, locking half with clamps and hardware
924 Manual release, mounting half with clamps and hardware
110G56 Lock nut for use with Bus bar contact
SB175-lockout Safety lockout
111197G1 Charger key
134G2 Dust cover
945 Cable clamps
945G3 Cable clamps-2 single conductor with hardware. Use with "A" frame only.
946G1 Cable clamps-1 twin conductor with hardware. Use with "A" frame only.

Bushings

Part Number Description Wire AWG Wire sq. mm
5648 Use with 944 1/0 to #10 53.5 to 5.1
5663 Use with 944 1/0 to #6 53.5 to 13.3
5687 Use with 944 1/0 to #1 53.5 to 42.4
5690 Use with 944 1/0 to #2 53.5 to 33.6
5693 Use with 944 1/0 to #4 53.5 to 21.2

Tooling

Part Number Description
1368 Hand tool for 1/0 to #1 (53.5/42.4)
1387G1 Pneumatic tool
1388G3 - die for 1/0 to #1 (53.5/42.4)
1388G5 - die for #4
1389G5 - locator for #4
1389G3 - locator for 1/0 to #1 (53.5/42.4)
1303G4 - die for 1/0 to #4 (53.5/21.1)
1304G4 - locator for 1/0 to #4 (53.5/21.1)

Contact Dimensions

Part Number -A- -B- -C- -D- -E- -F-
mm in. mm in. mm in. mm in. mm in. mm in.
944 59.7 2.35 13.1 0.52 11.1 0.44 27.4 1.08 12.7 0.5 N/A
947 59.7 2.35 13.1 0.52 8.9 0.35 27.4 1.08 12.7 0.5 N/A
948 59.7 2.35 13.1 0.52 7.5 0.30 25.9 1.02 12.7 0.5 N/A
944G1 59.7 2.35 13.1 0.52 9.9 0.39 27.4 1.08 12.7 0.5 N/A
948G1 53.3 2.10 9.3 0.37 11.7 0.46 21.3 0.84 12.7 0.5 N/A
180BBS 109.0 4.29 25.4 1.00 12.7 0.50 N/A 4.6 0.18 N/A

Bus Bar Layout Dimensions

Part Number - J - - K - - L - - M -
mm in. mm in. mm in. mm in.
180BBS 26.8 1.05 26.8(min) 1.05(min) 9.53 0.375 3.43 0.135

Bus Bar Mounting Dimensions

Part Number - E - - F - - J -
mm in. mm in. mm in.
180BBS 88.9 3.50 10.2 0.40 5.0 -19.0 0.20 -0.75

2412101637_Anderson-Power-6328G1_C3683906.pdf

Send RFQ
Stock:
MOQ: