High Durability Connector Bel Fuse MD801-009-07NF8-13PE for Military Transportation and Broadcasting
Manufacturer:
Bel Fuse
Description:
Circular Connector Assemblies
Category:
Circular Connector Accessories/Circular Connector Assemblies
Specifications
Mfr. Part #:
MD801-009-07NF8-13PE
Model Number:
MD801-009-07NF8-13PE
Introduction
Product Overview
The Bel Cinch MD801 Series connectors are miniature 38999-style connectors designed for demanding military and aerospace applications. Featuring a Dual-Start ACME thread for enhanced protection against cross-mating and vibration, these connectors offer reliable performance in extreme environments. Available in various shell sizes and insert arrangements, they support crimp, solder, and PC tail terminations, making them suitable for board mount applications. The MD801 Series is ideal for critical components and assemblies in networking, telecommunications, computing, military, aerospace, transportation, and broadcasting industries, as well as automotive, medical, and consumer electronics markets.
Product Attributes
- Brand: Bel Cinch
- Series: MD801
- Design Standard: MIL-DTL-38999 equivalent performance
- Keying: Shell Keying options available
- Termination Types: Crimp, PC Tail, Solder Cup
- Shell Materials: Aluminum, Stainless Steel
- Platings: Standard and Specialty Platings available (e.g., Cadmium with olive drab chromate, Black hard anodize, Black Zinc Nickel over Electroless Nickel, Nickel PTFE, Electroless Nickel)
- Sealing: Hermetic sealing options available for critical applications
- Durability: 2000 mating cycles
- IP Rating: IP67 (Mated)
Technical Specifications
| Specification | Value |
|---|---|
| Current Rating (#23 Contact Size) | 5 A |
| Dielectric Withstanding Voltage (#23 Contact Size) | 750 VAC |
| Insulation Resistance | 5000 M minimum |
| Operating Temperature | -65 C to +175 C |
| Shock Resistance | 300 g |
| Vibration Resistance | 37 g |
| Shielding Effectiveness | 55dB min from 100MHz 1000MHz |
| Shell Sizes Available | 5, 6, 7, 8, 9, 10, 13 |
| Contact Arrangements | 1 to 130 contacts |
MD801 Series - Plug Ordering Information
| Part Component | Description | Example Code |
|---|---|---|
| Series Designation | Dual start ACME Thread Series | MD801- |
| Series Type | 007 = Plug with banding platform 008 = Plug with rear accessory thread | 007 |
| Shell Style | -16 = Plug with anti-decoupling spring -26 = Plug with ratchet mechanism | -16 |
| Shell Material/Finish | NF = Aluminum / Cadmium with olive drab chromate C = Aluminum / Black hard anodize, RoHS ZNU = Aluminum / Black Zinc Nickel over Electroless Nickel, RoHS MT = Aluminum / Nickel PTFE M = Aluminum / Electroless Nickel, RoHS Z1 = Stainless Steel / Passivated, RoHS | MT |
| Shell Keying | See Page 4, Table 2 | A |
| Contact Type | P = Pin (contacts included) S = Socket (contacts included) A = Pin (contacts not included) B = Socket (contacts not included) | P |
| Shell Size/Insert Arrangement | See Page 4, Figure 1 | 9-19 |
MD801 Series - Receptacle Ordering Information (Crimp/Solder)
| Part Component | Description | Example Code |
|---|---|---|
| Series Designation | Dual start ACME Thread Series | MD801- |
| Series Type | 009 = Receptacle with banding platform 010 = Receptacle with rear accessory thread | 009 |
| Shell Style | -01 = Receptacle, inline -02 = Receptacle, square flange -07 = Receptacle, jam nut | -02 |
| Shell Material/Finish | NF = Aluminum / Cadmium with olive drab chromate C = Aluminum / Black hard anodize, RoHS Z1 = Stainless Steel / Passivated, RoHS ZNU = Aluminum / Black Zinc Nickel over Electroless Nickel, RoHS MT = Aluminum / Nickel PTFE M = Aluminum / Electroless Nickel, RoHS | MT |
| Shell Keying | See Page 4, Table 3 | A |
| Contact Type | P = Pin (contacts included) S = Socket (contacts included) A = Pin (contacts not included) B = Socket (contacts not included) | S |
| Shell Size/Insert Arrangement | See Page 4, Figure 1 | 9-19 |
MD801 Series - Receptacle Ordering Information (PC Tail/Solder Cup)
| Part Component | Description | Example Code |
|---|---|---|
| Series Designation | Dual start ACME Thread Series | MD801- |
| Series Type | 011 = Receptacle for PC tail or solder cup contacts 033 = Receptacle for PC tail or solder cup contacts, water immersion | 011 |
| Shell Style | -02 = Receptacle, square flange -07 = Receptacle, jam nut -12 = Receptacle, square flange, rear panel mount with non-locking clinch nuts -22 = Receptacle, square flange, rear panel mount with locking clinch nuts | -02 |
| Shell Material/Finish | NF = Aluminum / Cadmium with olive drab chromate C = Aluminum / Black hard anodize, RoHS Z1 = Stainless Steel / Passivated, RoHS ZNU = Aluminum / Black Zinc Nickel over Electroless Nickel, RoHS MT = Aluminum / Nickel PTFE M = Aluminum / Electroless Nickel, RoHS | MT |
| Shell Keying | See Table 3 (Receptacle) | A |
| Contact Type | P = Pin, PC Tail S = Socket, PC Tail E = Pin, Solder Cup F = Socket, Solder Cup | S |
| Shell Size/Insert Arrangement | See Page 10, Figure 1 | 9-19 |
Dimensions (Plugs - Example)
| Shell Size | A (in/mm) | B (in/mm) | Thread | D (in/mm) | Rear Thread |
|---|---|---|---|---|---|
| 5 | 0.54 (13.72) | 0.65 (16.51) | 0.3125-0.05P-0.1L-DS-2B | 0.245 (6.22) | 0.2500-32 UNEF-2A |
| 6 | 0.60 (15.24) | 0.69 (17.53) | 0.3750-0.05P-0.1L-DS-2B | 0.290 (7.37) | 0.3125-32 UNEF-2A |
| 13 | 1.05 (26.67) | 1.10 (27.94) | 0.81250-.1P-0.2L-DS-2B | 0.650 (16.51) | 0.6875-24 UNEF-2A |
Dimensions (In-Line Receptacles - Example)
| Shell Size | A (in/mm) | B (in/mm) | Thread | D (in/mm) | Flat Thread |
|---|---|---|---|---|---|
| 5 | 0.355 (9.02) | 0.325 (8.25) | 0.3125-0.05P-0.1L-DS-2B | 0.245 (6.22) | 0.2500-32 UNEF-2A |
| 6 | 0.415 (10.54) | 0.385 (9.78) | 0.3750-0.05P-0.1L-DS-2B | 0.290 (7.37) | 0.3125-32 UNEF-2A |
| 13 | 0.855 (21.72) | 0.825 (20.96) | 0.81250-.1P-0.2L-DS-2B | 0.650 (16.51) | 0.6875-24 UNEF-2A |
Dimensions (Square Flange Receptacles - Example)
| Shell Size | A (in/mm) | Sq | BSC | C (in/mm) | D (in/mm) | E (in/mm) | F (in/mm) | J (in/mm) | Thread | Threaded |
|---|---|---|---|---|---|---|---|---|---|---|
| 5 | 0.530 (13.46) | 0.363 (9.22) | 0.680 (17.27) | 0.096 (2.44) | 0.091 (2.31) | 0.3125-0.05P-0.1L-DS-2A | 0.245 (6.22) | 0.2500-32 UNEF-2A | ||
| 6 | 0.590 (14.99) | 0.423 (10.74) | 0.750 (19.05) | 0.096 (2.44) | 0.091 (2.31) | 0.3750-0.05P-0.1L-DS-2A | 0.290 (7.37) | 0.3125-32 UNEF-2A | ||
| 13 | 1.030 (26.16) | 0.812 (20.62) | 1.375 (34.92) | 0.130 (3.30) | 0.126 (3.20) | 0.8125-0.1P-0.2L-DS-2A | 0.650 (16.51) | 0.6875-24 UNEF-2A |
Dimensions (Jam Nut Receptacles - Example)
| Shell Size | A (in/mm) | B (in/mm) | C (in/mm) | Thread | Thread | F (in/mm) | G (in/mm) | Flat Thread | Thread |
|---|---|---|---|---|---|---|---|---|---|
| 5 | 0.54 (13.72) | 0.65 (16.51) | 0.545 (13.84) | 0.3125-0.05P-0.1L-DS-2B | 0.375-28 UNEF-2A | 0.245 (6.22) | 0.250-32 UNEF-2A | ||
| 6 | 0.635 (16.13) | 0.69 (17.53) | 0.595 (15.11) | 0.3750-0.05P-0.1L-DS-2B | 0.4375-28 UNEF-2A | 0.290 (7.37) | 0.3125-32 UNEF-2A | ||
| 13 | 1.078 (27.38) | 1.10 (27.94) | 1.044 (26.52) | 0.81250-.1P-0.2L-DS-2B | 0.875-28 UNEF-2A | 0.650 (16.51) | 0.6875-24 UNEF-2A |
Dimensions (PC Tail Receptacles - Example)
| Shell Size | A (in/mm) | Sq | B (Bsc) | C (in/mm) | D (in/mm) | E (in/mm) | F (in/mm) | J (in/mm) | K (in/mm) | L (in/mm) | M (in/mm) | T (in/mm) | Flat | Holes | Thread | Thread |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5 | 0.530 (13.46) | 0.363 (9.22) | 0.680 (17.27) | 0.575 (14.60) | 0.545 (13.84) | 0.350 (8.89) | 0.096 (2.44) | 0.91 (2.31) | 0.3125-0.05P-0.1L2A | 0.375-28 UNEF-2A | 0.244 (6.20) | 0.175 (4.44) | ||||
| 6 | 0.590 (14.99) | 0.423 (1.74) | 0.750 (19.05) | 0.635 (16.13) | 0.595 (15.11) | 0.410 (1.41) | 0.375-0.05P-0.1L2A | 0.4375-28 UNEF-2A | 0.330 (8.38) | 0.238 (6.05) | ||||||
| 13 | 1.030 (26.16) | 0.812 (2.62) | 1.375 (34.92) | 1.078 (27.38) | 1.044 (26.52) | 0.845 (21.46) | 0.812-1P-0.2L2A | 0.8750-28 UNEF-2A | 0.703 (17.86) | 0.599 (15.21) |
Contact Size and Wire Range
| Contact Size | Wire Size Range |
|---|---|
| #22 | #22-#28 |
| #20 | #20-#24 |
| #16 | #16-#20 |
| #12 | #12-#14 |
Tools and Sealing Plugs
| Item | Part Number |
|---|---|
| Pin Contacts (#23) | 806-0060-210 |
| Socket Contacts (#23) | 857-0060-210 |
| Insertion Tool | M81969/1-05 |
| Removal Tool | M22520/1-01 |
| Crimp Tool (Mil Spec Positioner) | K1461 |
| Crimp Tool (Mil Spec or Daniels) | M22520/2-01 |
2411041603_Bel-Fuse-MD801-009-07NF8-13PE_C20680724.pdf
Send RFQ
Stock:
MOQ:
