MIL-DTL-38999 circular connector Bel Fuse MD801-007-16NF10-26SA with shell keying and vibration resistant thread
Manufacturer:
Bel Fuse
Description:
Circular Connector Assemblies
Category:
Circular Connector Accessories/Circular Connector Assemblies
Specifications
Mfr. Part #:
MD801-007-16NF10-26SA
Model Number:
MD801-007-16NF10-26SA
Introduction
Product Overview
The Bel Cinch MD801 Series connectors are high-performance, miniature MIL-DTL-38999 compliant circular connectors designed for demanding military and aerospace applications. Featuring a Dual-Start ACME thread for enhanced protection against cross-mating and vibration, these connectors offer reliable performance in extreme environments. They are available in a variety of shell materials, finishes, and configurations, including plugs and receptacles with crimp, PC tail, or solder cup contacts. The MD801 series is suitable for critical components and assemblies where preventing leakage under extreme temperature, pressure, and humidity changes is essential. Key markets include military, aerospace, and down-hole applications.
Product Attributes
- Brand: Bel Cinch
- Series: MD801
- Compliance: MIL-DTL-38999
- Keying: Shell Keying available
- Thread Type: Dual-Start ACME thread
- Contact Types: Crimp, PC Tail, Solder Cup
- Shell Materials: Aluminum, Stainless Steel
- Platings/Finishes: Aluminum / Cadmium with olive drab chromate, Aluminum / Black hard anodize (RoHS), Aluminum / Black Zinc Nickel over Electroless Nickel (RoHS), Aluminum / Nickel PTFE, Aluminum / Electroless Nickel (RoHS), Stainless Steel / Passivated (RoHS)
- Environmental Sealing: Hermetic sealing available, IP67 Mated
Technical Specifications
| Specification | Value |
|---|---|
| Current Rating (#23) | 5 A |
| Dielectric Withstanding Voltage (#23) | 750 VAC |
| Insulation Resistance | 5000 M minimum |
| Operating Temperature | -65 C to +175 C |
| Shock Resistance | 300 g |
| Vibration Resistance | 37 g |
| Shielding Effectiveness | 55dB min from 100MHz 1000MHz |
| Durability | 2000 mating cycles |
| IP Rating | IP67 Mated |
| Shell Sizes Available | 5, 6, 7, 8, 9, 10, 13 |
| Contact Arrangements | 1 to 130 contacts |
MD801 Series Plug Ordering Information
| Part Component | Description |
|---|---|
| Series Designation | MD801- |
| Series | 007 = Plug with banding platform, 008 = Plug with rear accessory thread |
| Shell Style | -16 = Plug with anti-decoupling spring, -26 = Plug with ratchet mechanism |
| Shell Material/Finish | NF, C, ZNU, MT, M, Z1 |
| Shell Keying | See Page 4, Table 2 |
| Contact Type | P = Pin (contacts included), S = Socket (contacts included), A = Pin (contacts not included), B = Socket (contacts not included) |
| Shell Size/Insert Arrangement | See Page 4, Figure 1 |
MD801 Series Receptacle Ordering Information
| Part Component | Description |
|---|---|
| Series Designation | MD801- |
| Series | 009 = Receptacle with banding platform, 010 = Receptacle with rear accessory thread |
| Shell Style | -01 = Receptacle, inline, -02 = Receptacle, square flange, -07 = Receptacle, jam nut |
| Shell Material/Finish | NF, C, Z1, ZNU, MT, M |
| Shell Keying | See Page 4, Table 3 |
| Contact Type | P = Pin (contacts included), S = Socket (contacts included), A = Pin (contacts not included), B = Socket (contacts not included) |
| Shell Size/Insert Arrangement | See Page 4, Figure 1 |
MD801 Series Receptacle with PC Tail or Solder Cup Ordering Information
| Part Component | Description |
|---|---|
| Series Designation | MD801- |
| Series | 011 = Receptacle for PC tail or solder cup contacts, 033 = Receptacle for PC tail or solder cup contacts, water immersion |
| Shell Style | -02 = Receptacle, square flange, -07 = Receptacle, jam nut, -12 = Receptacle, square flange, rear panel mount with non-locking clinch nuts, -22 = Receptacle, square flange, rear panel mount with locking clinch nuts |
| Shell Material/Finish | NF, C, Z1, ZNU, MT, M |
| Shell Keying | See Table 3 (Receptacle) |
| Contact Type | P = Pin, PC Tail; S = Socket, PC Tail; E = Pin, Solder Cup; F = Socket, Solder Cup |
| Shell Size/Insert Arrangement | See Page 10, Figure 1 |
MD801 Series Dimensions (Examples)
| Shell Size | A (Plug) | B (Plug) | A (In-Line Receptacle) | B (In-Line Receptacle) | A (Square Flange Receptacle) | B (Square Flange Receptacle) | A (Jam Nut Receptacle) | B (Jam Nut Receptacle) |
|---|---|---|---|---|---|---|---|---|
| 5 | 0.54 (13.72) | 0.65 (16.51) | 0.355 (9.02) | 0.325 (8.25) | 0.530 (13.46) | 0.363 (9.22) | 0.54 (13.72) | 0.65 (16.51) |
| 6 | 0.60 (15.24) | 0.69 (17.53) | 0.415 (10.54) | 0.385 (9.78) | 0.590 (14.99) | 0.423 (10.74) | 0.635 (16.13) | 0.69 (17.53) |
| 13 | 1.05 (26.67) | 1.10 (27.94) | 0.855 (21.72) | 0.825 (20.96) | 1.030 (26.16) | 0.812 (20.62) | 1.078 (27.38) | 1.10 (27.94) |
MD Connectors Tools and Sealing Plugs
| Contact Size | Wire Size Range | Pin Contacts | Sockets | Sealing Plugs | Insertion/Removal Tool | Crimp Tool | Positioner |
|---|---|---|---|---|---|---|---|
| #22 | #22-#28 | 806-0060-210 | 857-0060-210 | None | M81969/1-05 | M22520/1-01 | K1461 |
| #20 | #20-#24 | M39029/58-363 | M39029/57-357 | None | M22520/2-01 | M22520/1-04 | |
| #16 | #16-#20 | M39029/58-364 | M39029/57-358 | None | M22520/1-01 | M22520/1-04 | |
| #12 | #12-#14 | M39029/58-365 | M39029/57-359 | None | M22520/1-01 | M22520/1-04 |
Contact Information
- North America: +1 507.833.8822, ccsorders@us.cinch.com
- Asia-Pacific: +86 21 5442 7668, ccs.asia.sales@as.cinch.com
- Europe, Middle East: +44 (0) 1245 342060, CinchConnectivity@eu.cinch.com
2411041603_Bel-Fuse-MD801-007-16NF10-26SA_C21741266.pdf
Send RFQ
Stock:
MOQ:
