Bel Fuse MD801 009 07NF6 4SE MIL DTL 38999 Miniature Connector Featuring Dual Start ACME Thread for Military
Manufacturer:
Bel Fuse
Description:
Circular Connector Assemblies
Category:
Circular Connector Accessories/Circular Connector Assemblies
Specifications
Mfr. Part #:
MD801-009-07NF6-4SE
Model Number:
MD801-009-07NF6-4SE
Introduction
Product Overview
The Bel Cinch MD801 Series connectors are miniature MIL-DTL-38999 compliant connectors designed for critical military and aerospace applications. Featuring a Dual-Start ACME thread for enhanced protection against cross-mating and vibration, these connectors offer high reliability in extreme environments. They are available in various shell materials and finishes, with options for crimp, PC tail, or solder cup contacts. The MD801 Series is suitable for networking, telecommunications, computing, military, aerospace, transportation, and broadcasting industries, as well as automotive, medical, and consumer electronics markets.
Product Attributes
- Brand: Bel Cinch
- Series: MD801
- Compliance: MIL-DTL-38999
- Thread Type: Dual-Start ACME
- Contact Termination Options: Crimp, PC Tail, Solder Cup
- Shell Materials: Aluminum, Stainless Steel
- Platings/Finishes: Aluminum / Cadmium with olive drab chromate, Aluminum / Black hard anodize (RoHS), Aluminum / Black Zinc Nickel over Electroless Nickel (RoHS), Aluminum / Nickel PTFE, Aluminum / Electroless Nickel (RoHS), Stainless Steel / Passivated (RoHS)
- Key Markets: Military, Aerospace, Down-hole applications
Technical Specifications
| Specification | Value |
|---|---|
| Current Rating (#23 Contact) | 5 A |
| Dielectric Withstanding Voltage (#23 Contact) | 750 VAC |
| Insulation Resistance | 5000 M minimum |
| Operating Temperature | -65 C to +175 C |
| Shock | 300 g |
| Vibration | 37 g |
| Shielding Effectiveness | 55dB min from 100MHz 1000MHz |
| Durability | 2000 mating cycles |
| IP Rating (Mated) | IP67 |
| Shell Sizes Available | 5, 6, 7, 8, 9, 10, 13 |
| Contact Arrangements | 1 to 130 contacts |
| Contact Sizes | #12, #16, #20, #23 |
Model Variations and Ordering Information
Plugs
| Series Designation | Series | Shell Style | Shell Material/Finish | Shell Keying | Contact Type | Shell Size/Insert Arrangement |
|---|---|---|---|---|---|---|
| MD801- 007 -16 MT 9-19 P A | MD801- (Dual start ACME Thread) | 007 (Plug with banding platform) or 008 (Plug with rear accessory thread) | NF, C, ZNU, MT, M, Z1 | A, B (See Table 2) | P (Pin, included), S (Socket, included), A (Pin, not included), B (Socket, not included) | See Page 4, Figure 1 |
Receptacles
| Series Designation | Series | Shell Style | Shell Material/Finish | Shell Keying | Contact Type | Shell Size/Insert Arrangement |
|---|---|---|---|---|---|---|
| MD801- 009 -02 MT 9-19 S A | MD801- (Dual start ACME Thread) | 009 (Receptacle with banding platform) or 010 (Receptacle with rear accessory thread) | NF, C, Z1, ZNU, MT, M | A, B (See Table 3) | P (Pin, included), S (Socket, included), A (Pin, not included), B (Socket, not included) | See Page 4, Figure 1 |
| MD801- 011 -02 MT 9-19 S A | MD801- (Dual start ACME Thread) | 011 (Receptacle for PC tail or solder cup contacts) or 033 (Receptacle for PC tail or solder cup contacts, water immersion) | NF, C, Z1, ZNU, MT, M | See Table 3 (Receptacle) | P (Pin, PC Tail), S (Socket, PC Tail), E (Pin, Solder Cup), F (Socket, Solder Cup) | See Page 10, Figure 1 |
Shell Keying Positions
| Position | A (degrees) | B (degrees) | C (degrees) | D (degrees) | E (degrees) | F (degrees) |
|---|---|---|---|---|---|---|
| A | 150 | 75 | 95 | 140 | 75 | 95 |
| B | 210 | 210 | 230 | 275 | 275 | 210 |
Insert Arrangements (Examples)
| Arrangement | Contacts | Contact Size |
|---|---|---|
| 4-6 | 6 | #23 |
| 6-4 | 4 | #23 |
| 13-2 | 2 | #12 |
| 13-205 | 4-#12, 4-#23 | #12, #23 |
| 13-37 | 37 | #23 |
Dimensions (Examples)
| Shell Size | A (Plug) | A (In-Line Receptacle) | A (Square Flange Receptacle) | A (Jam Nut Receptacle) | Thread (Plug) | Thread (In-Line Receptacle) | Thread (Square Flange Receptacle) | Thread (Jam Nut Receptacle) |
|---|---|---|---|---|---|---|---|---|
| 5 | 0.54 (13.72) | 0.355 (9.02) | 0.530 (13.46) | 0.54 (13.72) | 0.3125-0.05P-0.1L-DS-2B | 0.3125-0.05P-0.1L-DS-2B | 0.3125-0.05P-0.1L-DS-2A | 0.3125-0.05P-0.1L-DS-2B |
| 9 | 0.81 (20.57) | 0.605 (15.37) | 0.850 (21.59) | 0.830 (21.08) | 0.5625-0.05P-0.1L-DS-2B | 0.5625-0.05P-0.1L-DS-2B | 0.525-0.05P-0.1L-DS-2S | 0.5625-0.05P-0.1L-DS-2B |
| 13 | 1.05 (26.67) | 0.855 (21.72) | 1.030 (26.16) | 1.078 (27.38) | 0.81250-.1P-0.2L-DS-2B | 0.81250-.1P-0.2L-DS-2B | 0.812-1P-0.2L-DS-2A | 0.81250-.1P-0.2L-DS-2B |
Panel Cutout Dimensions (Examples)
| Shell Size | A (Square Flange Receptacle) | C (Square Flange Receptacle) | A (Jam Nut Receptacle) | C (Jam Nut Receptacle) |
|---|---|---|---|---|
| 5 | 0.328 (8.33) | 0.096 (2.44) | 0.356 (9.04) | 0.356 (9.04) |
| 9 | 0.578 (14.68) | 0.130 (3.30) | 0.602 (15.29) | 0.602 (15.29) |
| 13 | 0.828 (21.03) | 0.130 (3.30) | 0.851 (21.62) | 0.851 (21.62) |
Tools and Sealing Plugs
| Contact Size | Wire Size Range | Pin Contacts | Sockets | Sealing Plugs | Insertion/Removal Tool | Crimp Tool | Positioner |
|---|---|---|---|---|---|---|---|
| #23 | #22-#28 | 806-0060-210 | 857-0060-210 | None | M81969/1-05 | M22520/1-01 | K1461 |
| #20 | #20-#24 | M39029/58-363 | M39029/57-357 | None | M22520/2-01 | M22520/1-04 | |
| #16 | #16-#20 | M39029/58-364 | M39029/57-358 | None | M22520/1-01 | M22520/1-04 | |
| #12 | #12-#14 | M39029/58-365 | M39029/57-359 | None | M22520/1-01 | M22520/1-04 |
2411061106_Bel-Fuse-MD801-009-07NF6-4SE_C21269020.pdf
Send RFQ
Stock:
MOQ:
