Bel Fuse MD801 009 07NF5 3PC Connector Featuring Aluminum Stainless Steel Shells and Hermetic Sealing
Manufacturer:
Bel Fuse
Description:
Circular Connector Assemblies
Category:
Circular Connector Accessories/Circular Connector Assemblies
Specifications
Mfr. Part #:
MD801-009-07NF5-3PC
Model Number:
MD801-009-07NF5-3PC
Introduction
Product Overview
The Cinch MD801 Series connectors are miniature MIL-DTL-38999 compliant connectors designed for demanding military and aerospace applications. Featuring a Dual-Start ACME thread for enhanced protection against cross-mating and vibration, these connectors offer reliable performance in extreme environments. Available in various shell materials, finishes, and configurations including plugs and receptacles with crimp, PC tail, or solder cup contacts, the MD801 Series is suitable for critical components and assemblies where prevention of leakage under extreme temperature, pressure, and humidity changes is essential. Key markets include military, aerospace, and down-hole applications.
Product Attributes
- Brand: Bel / Cinch Connectivity Solutions
- Series: MD801 Series
- Compliance: MIL-DTL-38999
- Keying: Shell Keying available
- Thread Type: Dual-Start ACME Thread
- Contact Termination: Crimp, PC Tail, Solder Cup
- Shell Materials: Aluminum, Stainless Steel
- Finishes: Cadmium with olive drab chromate, Black hard anodize (RoHS), Black Zinc Nickel over Electroless Nickel (RoHS), Nickel PTFE, Electroless Nickel (RoHS), Passivated (RoHS)
- Sealing: Hermetic sealing available
Technical Specifications
| Specification | Value |
|---|---|
| Current Rating (#23 Contact) | 5 A |
| Dielectric Withstanding Voltage (#23 Contact) | 750 VAC |
| Insulation Resistance | 5000 M minimum |
| Operating Temperature | -65 C to +175 C |
| Shock Rating | 300 g |
| Vibration Rating | 37 g |
| Shielding Effectiveness | 55 dB min from 100 MHz 1000 MHz |
| Durability | 2000 mating cycles |
| IP Rating (Mated) | IP67 |
| Shell Sizes Available | 5, 6, 7, 8, 9, 10, 13 |
| Contact Arrangements | 1 to 130 contacts |
MD801 Series - Plug Ordering Information
| Component | Description |
|---|---|
| Series Designation | MD801- |
| Series Type | 007 = Plug with banding platform 008 = Plug with rear accessory thread |
| Shell Style | -16 = Plug with anti-decoupling spring -26 = Plug with ratchet mechanism |
| Shell Material/Finish | NF, C, ZNU, MT, M, Z1 (See Product Attributes for details) |
| Shell Keying | See Page 4, Table 2 |
| Contact Type | P = Pin (contacts included) S = Socket (contacts included) A = Pin (contacts not included) B = Socket (contacts not included) |
| Shell Size/Insert Arrangement | See Page 4, Figure 1 |
MD801 Series - Receptacle Ordering Information (Crimp Contacts)
| Component | Description |
|---|---|
| Series Designation | MD801- |
| Series Type | 009 = Receptacle with banding platform 010 = Receptacle with rear accessory thread |
| Shell Style | -01 = Receptacle, inline -02 = Receptacle, square flange -07 = Receptacle, jam nut |
| Shell Material/Finish | NF, C, Z1, ZNU, MT, M (See Product Attributes for details) |
| Shell Keying | See Page 4, Table 3 |
| Contact Type | P = Pin (contacts included) S = Socket (contacts included) A = Pin (contacts not included) B = Socket (contacts not included) |
| Shell Size/Insert Arrangement | See Page 4, Figure 1 |
MD801 Series - Receptacle Ordering Information (PC Tail or Solder Cup Contacts)
| Component | Description |
|---|---|
| Series Designation | MD801- |
| Series Type | 011 = Receptacle for PC tail or solder cup contacts 033 = Receptacle for PC tail or solder cup contacts, water immersion |
| Shell Style | -02 = Receptacle, square flange -07 = Receptacle, jam nut -12 = Receptacle, square flange, rear panel mount with non-locking clinch nuts -22 = Receptacle, square flange, rear panel mount with locking clinch nuts |
| Shell Material/Finish | NF, C, Z1, ZNU, MT, M (See Product Attributes for details) |
| Shell Keying | See Table 3 (Receptacle) |
| Contact Type | P = Pin, PC Tail S = Socket, PC Tail E = Pin, Solder Cup F = Socket, Solder Cup |
| Shell Size/Insert Arrangement | See Page 10, Figure 1 |
MD801 Series - Tools and Sealing Plugs
| Contact Size | Wire Size Range | Pin Contacts | Sockets | Sealing Plugs | Insertion/Removal Tool | Crimp Tool | Positioner |
|---|---|---|---|---|---|---|---|
| #22 | #22-#28 | 806-0060-210 | 857-0060-210 | None | M81969/1-05 | M22520/1-01 | K1461 |
| #20 | #20-#24 | M39029/58-363 | M39029/57-357 | M22520/2-01 | M22520/1-04 | ||
| #16 | #16-#20 | M39029/58-364 | M39029/57-358 | M22520/1-01 | M22520/1-04 | ||
| #12 | #12-#14 | M39029/58-365 | M39029/57-359 | M22520/1-01 | M22520/1-04 |
Contact Information
- North America: +1 507.833.8822, ccsorders@us.cinch.com
- Asia-Pacific: +86 21 5442 7668, ccs.asia.sales@as.cinch.com
- Europe, Middle East: +44 (0) 1245 342060, CinchConnectivity@eu.cinch.com
2411051901_Bel-Fuse-MD801-009-07NF5-3PC_C20821905.pdf
Send RFQ
Stock:
MOQ:
