0.5mm Pitch Right Angle SMT Connector Easy On Flip Cover CAX CAX AFC01 24XCB H2.0 for FPC Connection
Manufacturer:
CAX
Description:
Hinged Lid -55℃~+85℃ 24P 0.5mm 500mA 50V Bottom Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
翻盖式
Operating Temperature:
-55℃~+85℃
Number Of Contacts:
24P
Pitch:
0.5mm
Current Rating:
500mA
Voltage Rating (Max):
50V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
铜合金
Mfr. Part #:
CAX-AFC01-24XCB-H2.0
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
CAX-AFC01-24XCB-H2.0
Introduction
Product Overview
This product is a series of 0.5mm Pitch H=2.0 FPC Easy-on Right-Angle SMT connectors. Designed for reliable connections, these connectors feature a LCP housing and actuator, with phosphor bronze terminals and fitting nails. They are suitable for applications requiring a 50V AC maximum operating voltage and 0.5A DC current rating, operating within a temperature range of -55C to +85C. The easy-on flip-cover design facilitates simple FPC insertion and removal.
Product Attributes
- Brand: ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD
- Product Series: 0.5mm Pitch H=2.0 FPC Easy-on R/A SMT type connectors
- Housing Material: LCP (UL94V-0 Flammability Rating)
- Housing Color: White
- Actuator Material: LCP (UL94V-0 Flammability Rating)
- Actuator Color: Black
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Phosphor Bronze
- Pitch: 0.5mm
- FPC Height: 2.0mm
- Mounting Type: SMT
- Orientation: Right-Angle (R/A)
- Connection Type: Easy-on Flip Cover
Technical Specifications
| Item | Specifications | Test Conditions |
|---|---|---|
| Operating Voltage (Max.) | 50V AC | |
| Current Rating (Max.) | 0.5A DC | *: Including terminal temperature rise. |
| Operating Temperature Range | -55C ~ +85C | |
| Operating Humidity Range | Relative humidity 90% max. | |
| Storage Temperature Range | -10C ~ +50C | |
| Storage Humidity Range | Relative humidity 90% max. | |
| Contact Resistance | 30 m Max. | Mate applicable FPC and measure by dry circuit, 20mV Max, 10mA. (EIA-364-23) |
| Insulation Resistance | 500 M Min. | Mate applicable FPC and apply 500V DC between adjacent terminal or ground. (EIA-364-21) |
| Dielectric Strength | No Breakdown | Mate applicable FPC, apply 250V AC(rms) for 1 minute between adjacent terminal or ground.(EIA-364-20) |
| FPC Retention Force | Pos.x 0.30N Min. | Insert the actuator, pull the FPC at a rate of 253mm per minute. |
| Terminal Retention Force | 3N Min. | Apply axial pull out force at the rate of 253 mm/minute on the terminal assembled in the housing. |
| Fitting Nail Retention Force | 1.0N Min. | Apply axial pull out force at the rate of 253 mm/minute on the Fitting Nail assembled in the housing. |
| Durability (Contact Resistance) | 60m Max. | Insert and withdraw actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise | 30C Max. | Mate applicable FPC and measure the temperature rise of contact when the maximum AC rated current is passed. (EIA-364-70 METHOD 2) |
| Vibration (Contact Resistance) | 60m Max. | Mate connectors and subject to vibration conditions (1.5mm Amplitude, 10~55~10 Hz, 2 hours in each of X,Y,Z axes, passing DC 1mA). (EIA-364-28 Condition I) |
| Vibration (Discontinuity) | 1sec Max. | Mate connectors and subject to vibration conditions (1.5mm Amplitude, 10~55~10 Hz, 2 hours in each of X,Y,Z axes, passing DC 1mA). (EIA-364-28 Condition I) |
| Shock (Contact Resistance) | 60m Max. | Mate applicable FPC and subject to 490m/s {50G} shock for 3 times in each of 6 directions along 3 axes, passing DC 1mA. (EIA-364-27, test condition A) |
| Shock (Discontinuity) | 1sec Max. | Mate applicable FPC and subject to 490m/s {50G} shock for 3 times in each of 6 directions along 3 axes, passing DC 1mA. (EIA-364-27, test condition A) |
| Heat Resistance (Contact Resistance) | 60m Max. | Mate applicable FPC and expose to 852C for 96 hours, then condition at ambient room conditions for 1 to 2 hours. |
| Cold Resistance (Contact Resistance) | 60m Max. | Mate applicable FPC and expose to -402C for 96 hours, then condition at ambient room conditions for 1 to 2 hours. |
| Humidity (Contact Resistance) | 60m Max. | Mate applicable FPC and expose to 60 2C, 90-95% RH for 96 hours, then condition at ambient room conditions for 1 to 2 hours. |
| Humidity (Insulation Resistance) | 30 M Min. | Mate applicable FPC and expose to 60 2C, 90-95% RH for 96 hours, then condition at ambient room conditions for 1 to 2 hours. |
| Temperature Cycling (Contact Resistance) | 60m Max. | Mate applicable FPC and subject to 5 cycles of -553C (30 min) and +853C (30 min), then condition at ambient room conditions for 1 to 2 hours. |
| Salt Spray (Contact Resistance) | 60m Max. | Mate applicable FPC and expose to 51% NaCl solution at 352C for 484 hours, then wash with clean water and dry. |
| SO2 Gas (Contact Resistance) | 60m Max. | Mate applicable FPC and expose to 505 ppm SO2 gas at 402C for 24 hours. |
| NH3 Gas (Contact Resistance) | 60m Max. | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solder Wetting | 75% of immersed area must show no voids, pin holes. | Tin temperature 2455C, immersion depth 0.1mm from solder surface, soldering time 30.5 seconds. |
| Resistance to Soldering Heat (Soldering Iron) | No Breakdown | 0.2mm from terminal tip and fitting nail tip. Soldering time: 5 seconds Max. Solder temperature: 370~400C. |
Infrared Reflow Condition:
Temperature Condition Graph (Temperature on Board Pattern Side):
0C to 50C (Start, Pre-Heat)
50C to 100C (Time: 60sec)
100C to 150C (Time: 60~90sec)
150C to 200C (Time: 30sec)
200C to 230C (230C MIN./ 20~40sec)
230C to 250C (250C MAX. Peak Temp, 3sec. or less)
Instruction upon usage of ZIF Easy-On Type:
- Use the thumb or the forefinger, raise the top cover up.
- FPC gets along with conductivity down. Insert it parallel into the connector.
- Press the top cover lightly and rotate down to position, until FPC is totally inserted and not moved.
- Lift the top cover carefully, withdraw FPC.
Warnings:
- The whirling angle can't be greater than 120 degrees.
- When the angle that FPC inserts in is askew, it may cause electrical discontinuity.
- The strength of dragging upwards don't exceed 0.04N/pin max.
- While opening the connector and lifting the cover, don't use excessive strength and avoid touching the terminals.
2506051505_CAX-CAX-AFC01-24XCB-H2-0_C48677713.pdf
Related Products
CAX CAX AFA07 10XCG H2.5 ZIF R A Type K SMT Connector with Black LCP Latch and Natural Color Housing
Slide Lock -55℃~+85℃ 10P 1mm 500mA 50V Bottom Contact Surface Mount, Right Angle SMD,P=1.0mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
0.5mm Pitch FPC ZIF R A SMT Connector CAX CAX AFC07 24SCB H2 0 with Tube and Reel Packaging Options
Slide Lock -25℃~+85℃ 24P 0.5mm 400mA 50V Top Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
Compact 0.5mm Pitch FPC ZIF R A SMT Connector with Phosphor Bronze Terminals CAX CAX AFC07 06SCB H2 0
Slide Lock -25℃~+85℃ 6P 0.5mm 400mA 50V Top Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
Versatile CAX CAX-AFC01-14XCB-H2.0 connector compatible with various industrial control systems
Hinged Lid -55℃~+85℃ 14P 0.5mm 500mA 50V Bottom Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
| Image | Part # | Description | |
|---|---|---|---|
|
|
CAX CAX AFA07 10XCG H2.5 ZIF R A Type K SMT Connector with Black LCP Latch and Natural Color Housing |
Slide Lock -55℃~+85℃ 10P 1mm 500mA 50V Bottom Contact Surface Mount, Right Angle SMD,P=1.0mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
|
|
|
|
0.5mm Pitch FPC ZIF R A SMT Connector CAX CAX AFC07 24SCB H2 0 with Tube and Reel Packaging Options |
Slide Lock -25℃~+85℃ 24P 0.5mm 400mA 50V Top Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
|
|
|
|
Compact 0.5mm Pitch FPC ZIF R A SMT Connector with Phosphor Bronze Terminals CAX CAX AFC07 06SCB H2 0 |
Slide Lock -25℃~+85℃ 6P 0.5mm 400mA 50V Top Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
|
|
|
|
Versatile CAX CAX-AFC01-14XCB-H2.0 connector compatible with various industrial control systems |
Hinged Lid -55℃~+85℃ 14P 0.5mm 500mA 50V Bottom Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
|
Send RFQ
Stock:
MOQ:
