0.5mm Pitch H2.0 FPC Easy On SMT Connectors CAX CAX AFC01 34XCB H2.0 with Phosphor Bronze Terminals

Product Overview

This specification covers the 0.5mm Pitch H=2.0 FPC Easy-on R/A SMT type connectors series. Designed for reliable electrical connections, these connectors feature a LCP housing and actuator, with phosphor bronze terminals and fitting nails. They are suitable for a wide operating temperature range of -55C to +85C and offer a maximum operating voltage of 50V AC and a current rating of 0.5A DC. The easy-on design facilitates simple insertion and removal of FPC components.

Product Attributes

• Brand: ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD
• Product Series: 0.5mm Pitch H=2.0 FPC Easy-on R/A SMT type connectors
• Housing Material: LCP (White, UL94V-0 Flammability Rating)
• Actuator Material: LCP (Black, UL94V-0 Flammability Rating)
• Terminal Material: Phosphor Bronze
• Fitting Nail Material: Phosphor Bronze
• Pitch: 0.5mm
• Height: 2.0mm
• Type: Easy-on, Right Angle (R/A), SMT

Technical Specifications

Infrared Reflow Condition

Temperature Curve:

• Start (Pre-Heat 150C MAX.)
• 230C MIN./ 20~40sec
• 250C MAX. (Peak Temp) 3sec. or less
• (60sec)
• (60~90sec)
• (30sec)

(Temperature on Board Pattern Side)

Operating Instructions for ZIF Easy-On Type

1. Step 1: Use the thumb or the forefinger, raise the top cover up.
2. Step 2: FPC gets along with conductivity down. The parallel one inserts it in the connector.
3. Step 3: Press the top cover lightly and rotate down to make a reservation, until FPC is totally inserted and not moved.
4. Step 4: Lift the top cover carefully, withdraw FPC.

Warnings:

• The whirling angle cannot be greater than 120 degrees.
• When the angle that FPC inserts in is askew, it may cause electrical discontinuity.
• The strength of dragging upwards should not exceed 0.04N/pin max.
• While opening the connector top cover, do not use excessive strength and avoid touching the terminals.