USB C TYPE Series Connector FG FG-ST-C-FS-16PLS-5.75 Featuring Stainless Steel Parts and Beige Color
Manufacturer:
FG
Description:
Type-C SMD USB, DVI, HDMI Connector Adapters RoHS
Category:
USB, DVI, HDMI Connector Adapters/USB, DVI, HDMI Connector Adapters
Specifications
Supplementary Features:
带防水胶圈
Length:
5.75mm
Operating Temperature:
-30℃~+85℃
Connector Type:
Type-C
Connect-Disconnect Life:
1万次
Mfr. Part #:
FG-ST-C-FS-16PLS-5.75
Package:
SMD
Model Number:
FG-ST-C-FS-16PLS-5.75
Introduction
USB C TYPE Series Connectors
This specification covers the performance requirements and test methods for USB C TYPE Series Connectors. Designed for reliability and durability, these connectors are suitable for applications requiring robust electrical performance and mechanical resilience. They adhere to specified design, construction, and physical dimensions as detailed in applicable product drawings.
Product Attributes
- Material: LCP Plastic (for housing), Brass (for contacts), Stainless Steel (for unspecified parts)
- Color: Beige (for LCP Plastic)
- Certifications: EU RoHS Directive (EU) 2015/863 compliant
Technical Specifications
| Specification | Details | Test Method / Requirement |
|---|---|---|
| Ratings | ||
| Current Rating | VBUS pins (A4, B4, A9, B9) & GND pins (A1, B1, B12, A12): 5.0A (1.25A/Pin) Other pins: 0.25A/Pin | |
| Temperature Range (Storage) | -20 to +60 | |
| Temperature Range (Operating) | -30 to +80 | |
| Humidity (Max) | 90% Rh max. | |
| Test Conditions | ||
| Temperature Range | +15 to +35 | Unless otherwise specified |
| Humidity Range | 90% Rh max | Unless otherwise specified |
| Electrical Performance | ||
| Low Level Contact Resistance | 40m (Max) at 20mv(max) open circuit at 100mA. Below 50 m after 10000 insertion/extraction cycles. | EIA 364-23 (or MIL-STD-1344A, Method 3002.1, Test Condition B) |
| Insulation Resistance | 100 M Minimum | D.C 500 V applied between adjacent contacts, measured within 1 minute. (EIA 364-21 or MIL-STD-202F, Method 302, Test Condition B) |
| Dielectric Withstanding Voltage | No shortcircuiting and damage at AC 100 V R.M.S for 1 minute. | Test between adjacent contacts of mated and unmated connector assemblies. (EIA 364-20 or MIL-STD-202F, Method 301, Test Condition B) |
| Mechanical Performance | ||
| Insertion Force | 5~20N | Maximum rate of 12.5mm/min. (EIA 364-13) |
| Extraction Force | 8~20N | Maximum rate of 12.5mm/min. (EIA 364-13) |
| Durability | 10000 cycles (max rated 500 cycles/hour) | Mate and unmate Connector assemblies. Flip Interval: Every 2500 cycles. Requirements: No flashover/insulation breakdown, Extraction Force: Initial 8~20N, After 6~20N, Contact Resistance: Max.50m. (EIA 364-09) |
| Mechanical Shock | No discontinuities of 1 microsecond or longer duration. | Subject mated connector to 50Gs half-sine shock pulses of 11msec duration (18 shocks total). (EIA-364-27B) |
| Vibration | No discontinuities of 1 microsecond or longer duration. | Subject mated connectors to 10~55~10Hz traversed in 1 minute at 1.52mm amplitude for 2 hours each in 3 mutually perpendicular planes. (EIA-364-28) |
| Environmental Performance | ||
| Thermal Shock | Shall meet visual requirements, show no physical damage. Shall meet requirements of additional tests. | Ten cycles between 30 to +80. (EIA 364-32, Test Condition I, or MIL-202F, Method 107G Condition A.) |
| Humidity | Shall meet visual requirements, show no physical damage. Shall meet requirements of additional tests. | 96 Hours (Four complete cycles). (EIA 364-31, Test Condition A Method III, or MIL-202F, Method 103B Test Condition B.) |
| Salt Spray | Shall meet visual requirements, show no physical damage. Shall meet requirements of additional tests. | Environment: 35C2C, 95~98%RH, 51% Gas (by weight) for 48 hours. (EIA-364-26B Method 101D, Condition B) |
| Temperature Life | Shall meet visual requirements, show no physical damage. Shall meet requirements of additional tests. | Subject mated connectors to 80 for 250 hours. (EIA 364-17 Test Condition 3 Method A) |
| Solderability | The surface of the portion to be soldered shall be at least 95% covered with new solder coating. | After one hour steam aging. (EIA 364-52) |
| Resistance to Soldering Heat (Wave Soldering) | No mechanical defect on housing or other parts. | Pre-heat: 80, 60 Sec; Temperature: 260 5 ; Immersion duration: 10 1 sec. (MIL-STD-202F, Method 210A, Test Condition B) |
| Resistance to Soldering Heat (Reflow Soldering) | No mechanical defect on housing or other parts. | Pre-heat: 150(Min)~200(Max) , 60 ~180 Sec; Temperature: 260 5 ; Immersion duration: 10~40 sec. (EIAJ RCX-0101/102) |
| RoHS Compliance | ||
| Lead (Pb) | ND (Not Detected) | Limit: 1000 mg/kg (EU RoHS Directive (EU) 2015/863) |
| Mercury (Hg) | ND (Not Detected) | Limit: 1000 mg/kg (EU RoHS Directive (EU) 2015/863) |
| Cadmium (Cd) | ND (Not Detected) | Limit: 100 mg/kg (EU RoHS Directive (EU) 2015/863) |
| Hexavalent Chromium (Cr(VI)) | ND (Not Detected) | Limit: 0.10 g/cm (EU RoHS Directive (EU) 2015/863) |
| Polybrominated Biphenyls (PBBs) | ND (Not Detected) | Limit: 1000 mg/kg (EU RoHS Directive (EU) 2015/863) |
| Polybrominated Diphenyl Ethers (PBDEs) | ND (Not Detected) | Limit: 1000 mg/kg (EU RoHS Directive (EU) 2015/863) |
| Bis(2-ethylhexyl) Phthalate (DEHP) | ND (Not Detected) | Limit: 1000 mg/kg (EU RoHS Directive (EU) 2015/863) |
| Butyl Benzyl Phthalate (BBP) | ND (Not Detected) | Limit: 1000 mg/kg (EU RoHS Directive (EU) 2015/863) |
| Dibutyl Phthalate (DBP) | ND (Not Detected) | Limit: 1000 mg/kg (EU RoHS Directive (EU) 2015/863) |
| Diisobutyl Phthalate (DIBP) | ND (Not Detected) | Limit: 1000 mg/kg (EU RoHS Directive (EU) 2015/863) |
2509151140_FG-FG-ST-C-FS-16PLS-5-75_C51911917.pdf
Related Products
High Precision FG FG-ST-C-24P-RAT-7.9 Connector Engineered for Industrial and Commercial Applications
24P Type-C SMD USB, DVI, HDMI Connector Adapters RoHS
Robust FG FG-FG-TYPE-C 16PIN-1030019 connector engineered for industrial application reliability
16P Type-C SMD USB, DVI, HDMI Connector Adapters RoHS
USB C TYPE plug and receptacle connectors FG FG-ST-C-16P-1030017 designed for stable 5V AC voltage rating
Type-C SMD USB, DVI, HDMI Connector Adapters RoHS
Versatile FG FG-ST-C-6P-RAT-6.8H connector designed to meet demanding electrical system requirements
Type-C SMD USB, DVI, HDMI Connector Adapters RoHS
USB C TYPE plug and receptacle connectors FG FG-ST-C-TF1-16P-7.35 meeting IEC512 MIL-STD 202 standards
16P Type-C SMD USB, DVI, HDMI Connector Adapters RoHS
USB C TYPE Plug and Receptacle Connectors FG FG-ST-C-24P-CL03-14.3 Suitable for Various Applications
USB 3.1 Type-C SMD USB, DVI, HDMI Connector Adapters RoHS
USB C TYPE plug and receptacle connectors FG FG-ST-C-JTF5-16PA-L13.7 meeting IEC512 MIL-STD 202 standards
16P Type-C Through Hole USB, DVI, HDMI Connector Adapters RoHS
Versatile FG FG-ST-C-16P-LS-SMTD-6.5 connector engineered for various electronic device requirements
16P Type-C SMD USB, DVI, HDMI Connector Adapters RoHS
Type C 24 Pin Female Connector Vertical Surface Mount FG FG ST C 24P VT SMT 15 0 15 Millimeter Height
24P Type-C SMD USB, DVI, HDMI Connector Adapters RoHS
Connector FG FG-ST-C-16P-OT0.8-L6.5 industrial grade designed to ensure dependable performance
16P Type-C SMD USB, DVI, HDMI Connector Adapters RoHS
Send RFQ
Stock:
MOQ:
