0.5mm Pitch Flat Cable Connector with Locking Mechanism JUSHUO AFC07-S24ECC-00 Rated Current 0.4A
Manufacturer:
JUSHUO
Description:
FFC/FPC Connector 24 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
抽屉式
Number Of Contacts:
24P
Pitch:
0.5mm
Current Rating:
400mA
Voltage Rating (Max):
50V
Contact Type:
上接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
AFC07-S24ECC-00
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
AFC07-S24ECC-00
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors with a locking mechanism. Designed for reliable electrical and mechanical performance, these connectors are suitable for applications requiring a maximum voltage of 50V AC/DC and a maximum current of 0.4A. They operate within an ambient temperature range of -25 to +85 and are manufactured with high-quality materials to ensure durability and performance under various environmental conditions.
Product Attributes
- Product Name: FFC/FPC Flat Cable Connector
- Series: Locking
- Pitch: 0.5mm
- Housing Material: LCP (Natural) UL 94V-0
- Locking Housing Material: LCP (Black) UL 94V-0
- Terminal/Contact Material: Phosphor Bronze
- Surface Treatment: Tin Plated
- Packaging: Bagged
- Environmental Compliance: RoHS (implied by '')
Technical Specifications
| Item | Specification | Test Condition | Requirement |
|---|---|---|---|
| Ratings | |||
| Rated Voltage (MAX) | 50V [AC/DC (Virtual value) 50Hz] | ||
| Rated Current (MAX) | 0.4A | ||
| Ambient Temperature Range | -25+85 | ||
| Electrical Performance | |||
| Contact Resistance | 20 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. | |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminals or ground. | |
| Mechanical Performance | |||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC (0.3mm thickness) at a speed rate of 25 3mm/minute. | |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal at a speed rate of 25 3mm per minute. | |
| Environmental Performance and Others | |||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Actuator up to 20 cycles at a speed rate of less than 10 cycles/minute (no power). | |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). | |
| Vibration | Appearance: No Damage Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX | Under DC 1mA, Amplitude: 1.5mmP-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours in each X, Y, Z axes. | |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX | Under DC 1mA, 490m/s {50G}, 3 strokes in each X, Y, Z axes. | |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | Mate applicable FPC/FFC, place in 852 air for 96 hours, then return to room temperature for 1-2 hours. | |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | Mate applicable FPC/FFC, place in -402 air for 96 hours, then return to room temperature for 1-2 hours. | |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | Mate applicable FPC/FFC, place in 402, 90-95% RH air for 96 hours, then measure within 0.5 hours at room temperature. | |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: a) -553 for 30 minutes, b) 852 for 30 minutes, with 10-15 minutes at room temperature humidity between cycles. | |
| Salt Spray | Appearance: No Damage, No Corrosion Contact Resistance: 60 m MAX | 484 hours exposure to a salt spray from 51% solution at 35 2. Post-test rinse with room temperature water and dry. | |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. | |
| NH3 Gas Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | |
| Solderability | Solder Wetting: 95% coverage | Soldering Time: 20.5 sec. Soldering Temperature: 2355 Immersion depth: 0.2 mm from terminal tip. | |
| Resistance to Soldering Heat | Appearance: No Damage, No Deformation | Soldering Time: 50.5 sec. Soldering Temperature: 2605 Immersion depth: 0.2 mm from terminal tip. | |
Note: Refer to drawing for product shape, dimensions, and materials.
2409272302_JUSHUO-AFC07-S24ECC-00_C11092.pdf
Send RFQ
Stock:
MOQ:
