JUSHUO AFA07 S18FCC 00 0.5mm Pitch FPC FFC Connector 18 Pin Locking Type Rated Voltage 50V Current 0.4A
Manufacturer:
JUSHUO
Description:
FFC/FPC Connector 18 Position 1mm Pitch Bottom Contact Surface Mount, Right Angle
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
抽屉式
Number Of Contacts:
18P
Pitch:
1mm
Current Rating:
400mA
Voltage Rating (Max):
50V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
AFA07-S18FCC-00
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
AFA07-S18FCC-00
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors with a locking mechanism, designed for 18-pin applications. These connectors are suitable for use with 0.3mm thick FFC and are rated for a maximum voltage of 50V (AC/DC) and a maximum current of 0.4A. They operate within an ambient temperature range of -25 to +85, offering reliable electrical, mechanical, and environmental performance for various industrial applications.
Product Attributes
- Product Name: FFC/FPC Flat Cable Connector
- Material - Main Body: LCP (Natural) UL 94V-0
- Material - Housing Lock: LCP (Black) UL 94V-0
- Material - Terminal/Contact: Phosphor Bronze
- Surface Finish: Tin plated metal
- Product Packaging: Refer to drawing
Technical Specifications
| Item | Specification | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 50V [AC/DC (Virtual value) 50Hz] | |
| Rated Current (MAX) | 0.4A | |
| Ambient Temperature Range | -25+85 | |
| Electrical Performance | ||
| Contact Resistance | 20 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminals or ground. |
| Mechanical Performance | ||
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n=number of pins) |
| Withdrawal Force | 0.49*n (N) MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n=number of pins) |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal at the speed rate of 253mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal up to 20 cycles at a speed less than 10 cycles/minute (no power). |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration | Appearance: No Damage Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX | Amplitude: 1.5mm P-P Sweep time: 10-55-10Hz in 1 minute Duration: 2 hours in each X, Y, Z axes (under DC 1mA). |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX | 490m/s {50G}, 3 strokes in each X, Y, Z axes (under DC 1mA). |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 852, 96 hours (then return to room temp for 1-2 hours). |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | -402, 96 hours (then return to room temp for 1-2 hours). |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours (measured within 0.5 hours after returning to room temp). |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: a) -553 30 minutes, b) 852 30 minutes (with intermediate room temp dwell). |
| Salt Spray | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX | 484 hours exposure to a salt spray from 51% solution at 352 (followed by washing and drying). |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solder Ability | Solder Wetting: 95% coverage | Soldering Time: 20.5 sec. Soldering Temperature: 2355 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 50.5 sec. Soldering Temperature: 2605 0.2 mm from terminal tip. |
2410121439_JUSHUO-AFA07-S18FCC-00_C23826.pdf
Send RFQ
Stock:
MOQ:
