LIF Series 1.25mm Pitch FPC FFC Connector JUSHUO AF125-S30WCC-00 Rated Current 1.0A Voltage 125V
Manufacturer:
JUSHUO
Description:
-40℃~+85℃ Non-Latching 30P 1.25mm 1A 125V Right Angle Through Hole,Right Angle,P=1.25mm(Staggered Pins) FFC, FPC (Flat Flexible) Connector Assemblies RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-40℃~+85℃
Locking Feature:
无锁
Number Of Contacts:
30P
Pitch:
1.25mm
Current Rating:
1A
Voltage Rating (Max):
125V
Mounting Type:
弯插
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
AF125-S30WCC-00
Package:
Through Hole,Right Angle,P=1.25mm(Staggered Pins)
Model Number:
AF125-S30WCC-00
Introduction
Product Overview
This specification covers the 1.25mm Pitch FPC/FFC Connectors, LIF series, designed for flexible flat cable connections. Suitable for applications requiring a 0.3mm thick FFC with a 1.25mm pitch, these connectors are rated for a maximum voltage of 125V (AC/DC) and a maximum current of 1.0A. They operate within an ambient temperature range of -40 to +85 and are designed for reliable electrical, mechanical, and environmental performance.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Product Name: 1.25mm Pitch FPC/FFC Connectors
- Series: LIF
- Housing Material: LCP ( or UL 94V-0)
- Contact Material: Phosphor Bronze C5191R-EH
- Contact Plating: Ni Base 40u" min, Surface Sn 80120u" or Au:0.8u"min
Technical Specifications
| Item | Specification / Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 125V [AC(rms)/DC] | |
| Rated Current (MAX) | 1.0A | |
| Ambient Temperature Range | -40+85 | |
| Storage Condition (after opening humidity prevention packing) | Temperature: -5+35, Humidity: 70% RH Max. | |
| Performance - Electrical | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC, dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC, 500V DC between adjacent terminals or ground. |
| Dielectric Strength (rms) | No Breakdown | Mate applicable FPC/FFC, 200V AC (rms) for 1 minute between adjacent terminals or ground. |
| Performance - Mechanical | ||
| Locking Force | 1.96*n (N) MAX | Insert applicable FFC (0.3mm thick) at 253mm/minute. 'n' is the number of poles. |
| Withdrawal Force | 0.49*n (N) MIN | Extract applicable FFC (0.3mm thick) at 253mm/minute. 'n' is the number of poles. |
| Terminal / Housing Retention Force | 5.9 N MIN | Pull the terminal outwards at 25 3mm/minute. |
| Performance - Environmental and Others | ||
| Repeated Insertion and Withdrawal (Contact Resistance) | 40 m MAX | 20 cycles at speed rate < 10 cycles/minute, no power. |
| Temperature Rise (at rated current) | 30 MAX | Carrying rated current load (UL 498). |
| Vibration (Contact Resistance) | 40 m MAX | DC 1mA, Amplitude 1.5mm P-P, Sweep 10-55-10Hz/min, 2 hours in X, Y, Z axes. |
| Vibration (Discontinuity) | 1 ms.MAX. | DC 1mA, Amplitude 1.5mm P-P, Sweep 10-55-10Hz/min, 2 hours in X, Y, Z axes. |
| Shock (Contact Resistance) | 40 m MAX | DC 1mA, 490m/s{50G}, 3 strokes in each X, Y, Z axes. |
| Shock (Discontinuity) | 1 ms.MAX. | DC 1mA, 490m/s{50G}, 3 strokes in each X, Y, Z axes. |
| Heat Resistance (Contact Resistance) | 40 m MAX | Mate FPC/FFC, 96 hours at 852, then 1-2 hours at room temp. |
| Cold Resistance (Contact Resistance) | 40 m MAX | Mate FPC/FFC, 96 hours at -402, then 1-2 hours at room temp. |
| Humidity (Contact Resistance) | 40 m MAX | Mate FPC/FFC, 96 hours at 402, 90-95% RH, then 0.5 hours at room temp. |
| Humidity (Insulation Resistance) | 50 M MIN | Mate FPC/FFC, 96 hours at 402, 90-95% RH, then 0.5 hours at room temp. |
| Humidity (Dielectric Strength) | Must meet 4.1.3 | Mate FPC/FFC, 96 hours at 402, 90-95% RH, then 0.5 hours at room temp. |
| Temperature Cycling (Contact Resistance) | 40 m MAX | 5 cycles: -553 (30 min) -> Room Temp (10-15 min) -> 852 (30 min) -> Room Temp (10-15 min). |
| Salt Spray (Contact Resistance) | 40 m MAX | 48 hours exposure to 51% salt spray at 352, then wash and dry. |
| Salt Spray (Appearance) | No Damage, Corrosion | 48 hours exposure to 51% salt spray at 352, then wash and dry. |
| SO2 Gas (Contact Resistance) | 40 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas (Contact Resistance) | 40 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| NH3 Gas (Appearance) | No Damage | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability (Solder Wetting) | 95% or more coverage | Immersion in 2455 tin bath for 20.5 sec, 0.2 mm from terminal tip. |
| Resistance to Soldering Heat (Appearance) | No Damage, Deformation | Withstand wave soldering conditions twice (peak temp 2505 for 5-10s). |
| Product Shape, Dimensions and Materials | ||
| Housing Material | LCP ( or UL 94V-0) | Refer to drawing. |
| Contact Material | Phosphor Bronze C5191R-EH | Refer to drawing. |
| Contact Plating | Ni Base 40u" min, Surface Sn 80120u" or Au:0.8u"min | Refer to drawing. |
| Wave Soldering Temperature Condition Graph | ||
| Preheating Temperature Range | 80-120 | Max. heating slope 2C/sec, max. cooling slope 6C/sec. |
| Soldering Time (Wave 1+Wave 2) | 3-5 Sec. | |
| Solder Bath Temperature | 250-260 | |
| Conveyor Speed | 1.4-1.5m/min | |
| Packing, Transportation, Storage | ||
| Packing | PE bag packaging (unless otherwise specified) | |
| Transportation | Any vehicle allowed, moisture-proof and no mechanical damage required. | |
| Storage Temperature | -10+40 | Relative humidity 80%, no corrosive gases. (Note: Section 7.3.1 also states -5+35, 70% RH) |
| Storage Duration | 6 months | Re-qualification test required after 6 months. |
2409272303_JUSHUO-AF125-S30WCC-00_C22470645.pdf
Send RFQ
Stock:
MOQ:
