Flat Cable Connector 0.5mm Pitch FPC FFC with 45 Pins Bottom Entry 2mm Height JUSHUO AFC07-S45FCC-00
Manufacturer:
JUSHUO
Description:
FFC/FPC Connector 45 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
抽屉式
Number Of Contacts:
45P
Pitch:
0.5mm
Current Rating:
400mA
Voltage Rating (Max):
50V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
AFC07-S45FCC-00
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
AFC07-S45FCC-00
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors (series Locking), specifically a 1.0mm FPC drawer connector with 45 pins and a height of 2.0mm (bottom entry). Designed for reliable connections, these connectors are suitable for various applications requiring flat flexible cable interfaces.
Product Attributes
- Product Name: FFC/FPC Flat Cable Connector
- Main Body Material: LCP (Natural) UL 94V-0
- Housing Lock Material: LCP (Black) UL 94V-0
- Terminal/Contact Material: Phosphor Bronze
- Terminal Plating: Tin Plated
Technical Specifications
| Category | Item | Condition / Test Condition | Requirement |
|---|---|---|---|
| Ratings | Rated Voltage (MAX) | AC/DC (Virtual value) 50Hz | 50V |
| Rated Current (MAX) | - | 0.4A | |
| Ambient Temperature Range | - | -25+85 | |
| Electrical Performance | Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 20 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. | 500M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminals or ground. | No Breakdown | |
| Mechanical Performance | Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (0.3mm thick FFC) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 253mm per minute. | 3.92N MIN | |
| Environmental Performance and Others | Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at a speed rate of less than 10 cycles/minute (no power). | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX | |
| Vibration | Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X, Y, Z axes (DC 1mA applied). | Appearance: No Damage Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX | |
| Shock | 490m/s {50G}, 3 strokes in each X, Y, Z axes (DC 1mA applied). | Appearance: No Damage Discontinuity: 1 ms MAX | |
| Heat Resistance | 852, 96 hours (then return to room temp for 1-2 hours). | Appearance: No Damage Contact Resistance: 60 m MAX | |
| Cold Resistance | -402, 96 hours (then return to room temp for 1-2 hours). | Appearance: No Damage Contact Resistance: 60 m MAX | |
| Humidity | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours (then measure within 0.5 hours at room temp). | Appearance: No Damage Contact Resistance: 60 m MAX Insulation Resistance: 20 M MIN Dielectric Strength: Must meet 4.1.3 | |
| - | Temperature Cycling | 5 cycles of: a) -553 30 minutes; b) 852 30 minutes (with 10-15 min at room temp between cycles). | Appearance: No Damage Contact Resistance: 60 m MAX |
| - | Salt Spray | 484 hours exposure to a salt spray from 51% solution at 352 (followed by washing and drying). | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX |
| - | SO2 Gas | 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX |
| - | NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Other Performance | Solder ability | Soldering Time: 20.5 sec; Soldering Temperature: 2355; 0.2 mm from terminal tip. | Solder Wetting: 95% |
| Resistance to Soldering Heat | Soldering Time: 50.5 sec; Soldering Temperature: 2605; 0.2 mm from terminal tip. | Appearance: No Damage, Deformation |
Note: Product shape, dimensions, and materials are detailed in the accompanying drawing. Product packaging and images are also available.
2410121439_JUSHUO-AFC07-S45FCC-00_C53058.pdf
Send RFQ
Stock:
MOQ:
