FFC FPC Connector with Flip Up Actuator and Locking Mechanism JUSHUO AFC06 S50FIA 00 0.5mm Pitch
Product Overview
The AFC06-S**FIA-00 is a 0.5mm pitch FPC/FFC connector featuring a flip-up actuator and a H2.0 height. Designed for secure connections, it is suitable for flexible flat cables and offers reliable electrical and mechanical performance within a specified temperature range. This locking series connector is manufactured by Shenzhen Jushuo Electronics Co., Ltd.
Product Attributes
- Brand: Jushuo ()
- Origin: Shenzhen, China
- Product Name: FFC/FPC Connector
- Model Series: AFC06-S**FIA-00
- Actuator Type: Flip-up
- Locking Mechanism: Yes
- Housing Material: LCP (Natural, UL 94V-0)
- Locking Lever Material: LCP (Black, UL 94V-0)
- Terminal Material: Phosphor Bronze
- Contact Material: Phosphor Bronze
- Contact Plating: Gold Plated Metal
Technical Specifications
| Category | Item | Test Condition | Requirement |
|---|---|---|---|
| Ratings | Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | (AC/DC, 50Hz, Virtual Value) | 0.5A | |
| Ambient Temperature Range | -45 to +85 | ||
| Electrical Performance | Contact Resistance | Mate applicable FPC/FFC, dry circuit, 20mV MAX, 10mA | 20 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC, 500V DC between adjacent terminals or ground | 500 M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC, 200V AC (Virtual Value) for 1 minute between adjacent terminals or ground | No Breakdown | |
| Mechanical Performance | Locking and Withdrawal Force | Insert and extract 0.3mm thick FFC at 253mm/minute | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull terminal outwards at 253mm/minute | 3.92N MIN | |
| Environmental Performance | Repeated Insertion and Withdrawal | 20 cycles at < 10 cycles/minute (no power) | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load (UL 498) | 30 MAX | |
| Vibration | 1.5mm Amplitude, 10-55-10Hz/min sweep, 2 hours each in X, Y, Z axes (DC 1mA current) | Discontinuity: 1 ms MAX | |
| Shock | 490m/s {50G}, 3 strokes each in X, Y, Z axes (DC 1mA current) | Discontinuity: 1 ms MAX | |
| Heat Resistance | 96 hours at 852, then 1-2 hours at room temp | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Cold Resistance | 96 hours at -402, then 1-2 hours at room temp | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Other Performance | Humidity | 96 hours at 402, 90-95% RH, then measured within 0.5 hours at room temp | Insulation Resistance: 20 M MIN Appearance: No Damage |
| Temperature Cycling | 5 cycles: -452 (30 min) -> Room Temp (10-15 min) -> 852 (30 min) -> Room Temp (10-15 min) | Contact Resistance: 60 m MAX Appearance: No Damage, No Corrosion | |
| Salt Spray | 484 hours exposure to 51% salt spray at 352, followed by washing and drying | Contact Resistance: 60 m MAX Appearance: No Damage | |
| SO2 Gas Resistance | 24 hours exposure to 505ppm SO2 gas at 402 | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Soldering Performance | Solder Ability | Immersion in 2355 tin bath for 20.5 sec, 0.2mm from terminal tip | Solder Wetting: 95% |
| Resistance to Soldering Heat | Immersion in 2605 tin bath for 50.5 sec, 0.2mm from terminal tip | Appearance: No Damage, No Deformation |
Note: Specific dimensions and material details are referenced in the drawing.
2411121111_JUSHUO-AFC06-S50FIA-00_C41430100.pdf