1.25mm Pitch Flexible Flat Cable Connector JUSHUO AF125-S04HCC-00 Rated Voltage 125V Current 1.0A
Manufacturer:
JUSHUO
Description:
FFC/FPC Connector 4 Position 1.25mm Pitch Single-side Contact/Vertical Through Hole
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-40℃~+85℃
Locking Feature:
无锁
Number Of Contacts:
4P
Pitch:
1.25mm
Current Rating:
1A
Voltage Rating (Max):
125V
Contact Type:
单侧触点/垂直
Mounting Type:
直插
FFC, FCB Thickness:
0.3mm
Contact Material:
磷青铜
Mfr. Part #:
AF125-S04HCC-00
Package:
Through Hole,P=1.25mm
Model Number:
AF125-S04HCC-00
Introduction
Product Overview
This specification covers the 1.25mm Pitch FPC/FFC Connectors series, specifically the AF125-S**HCC-00 model. Designed for 1.25mm pitch flexible flat cable connections, these connectors are rated for a maximum voltage of 125V and a maximum current of 1.0A (AC/DC). They operate reliably within an ambient temperature range of -40 to +85. The series is suitable for applications requiring secure FPC/FFC mating, with performance criteria including contact resistance, insulation resistance, and dielectric strength.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Product Name: FPC/FFC Connector
- Part Number: AF125-S**HCC-00
- Housing Material: LCP (Natural or Black, UL 94V-0)
- Contact Material: Phosphor Bronze C5191R-EH
- Contact Plating: Ni Undercoat 40" min, Sn Surface 80120" or Au:0.8"min
- Pitch: 1.25mm
Technical Specifications
| Item | Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 125V | |
| Rated Current (MAX) | 1.0A [AC(rms)/DC] | |
| Ambient Temperature Range | -40 +85 | |
| Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (rms) for 1 minute between adjacent terminal or ground. |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC (0.3mm thick) at the speed rate of 253mm/minute. |
| Terminal / Housing Retention Force | 3.92 N MIN | Pull the terminal at the speed rate of 253mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal up to 20 cycles at a speed rate of less than 10 cycles/minute (no power). |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Appearance (after Temperature Rise test) | No Damage | Carrying rated current load (UL 498). |
| Vibration | Discontinuity: 1 ms MAX. Appearance: No Damage | Amplitude: 1.5mm P-P. Sweep time: 10-55-10Hz/min. Duration: 2 hours in each X, Y, Z axes (DC 1mA applied). |
| Shock | Discontinuity: 1 ms MAX. Appearance: No Damage | 490m/s {50G}, 3 strokes in each X, Y, Z axes (DC 1mA applied). |
| Heat Resistance | Contact Resistance: 60 m MAX Appearance: No Damage | 852, 96 hours, then return to room temperature for 1-2 hours. |
| Cold Resistance | Contact Resistance: 60 m MAX Appearance: No Damage | -402, 96 hours, then return to room temperature for 1-2 hours. |
| Humidity | Insulation Resistance: 20 M MIN Appearance: No Damage | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours. |
| Temperature Cycling | Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion | 5 cycles of: a) -553 30 minutes, b) 852 30 minutes, with 10-15 minutes at room temp between cycles. |
| Salt Spray | Contact Resistance: 60 m MAX Appearance: No Damage | 484 hours exposure to a salt spray from a 51% solution at 352. Post-test: rinse with room temp water, dry at room temp. |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX Appearance: No Damage | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance | Contact Resistance: 60 m MAX Appearance: No Damage | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting: 95% or more area coverage. | Soldering Time: 20.5 sec. Soldering Temperature: 2455, 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation. | Soldering Time: 50.5 sec. Soldering Temperature: 2605, 0.2 mm from terminal tip. |
2409271733_JUSHUO-AF125-S04HCC-00_C5380631.pdf
Send RFQ
Stock:
MOQ:
