1.25mm Pitch FPC FFC Connectors LIF Series JUSHUO AF125-S20WCC-00 Rated Voltage 125V Current 1A
Manufacturer:
JUSHUO
Description:
FFC/FPC Connector 20 Position 1.25mm Pitch Top Contact Through Hole, Right Angle
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-40℃~+85℃
Locking Feature:
无锁
Number Of Contacts:
20P
Pitch:
1.25mm
Current Rating:
1A
Voltage Rating (Max):
125V
Contact Type:
上接
Mounting Type:
弯插
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
AF125-S20WCC-00
Package:
Through Hole,Right Angle,P=1.25mm
Model Number:
AF125-S20WCC-00
Introduction
Product Overview
This specification covers the 1.25mm Pitch FPC/FFC Connectors, LIF series, designed for applications requiring a 1.25mm pitch and compatible with FFCs of 0.3mm thickness. These connectors are suitable for a maximum rated voltage of 125V (AC rms/DC) and a maximum rated current of 1.0A, operating within an ambient temperature range of -40 to +85. They are engineered for reliable electrical and mechanical performance, including low contact resistance, high insulation resistance, and robust terminal retention.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Product Name: 1.25mm Pitch FPC/FFC Connectors
- Series: LIF series
- Housing Material: LCP ( or UL 94V-0)
- Contact Material: Phosphor Bronze C5191R-EH
- Contact Plating: Ni base 40u min, Sn surface 80120u or Au:0.8umin
- Origin: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
Technical Specifications
| Item | Specification/Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 125V [AC (rms) / DC] | |
| Rated Current (MAX) | 1.0A | |
| Ambient Temperature Range | -40+85 | |
| Storage Condition (after opening humidity prevention packing) | Temperature: -5+35, Humidity: 70% RH Max. | |
| Performance - Electrical | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. |
| Dielectric Strength (rms) | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (rms) for 1 minute between adjacent terminals or ground. |
| Performance - Mechanical | ||
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC at the speed rate of 253mm/minute (0.3mm thick FFC). |
| Withdrawal Force | 0.49*n (N) MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute (0.3mm thick FFC). |
| Terminal/Housing Retention Force | 5.9 N MIN | Pull the terminal at the speed rate of 25 3mm per minute. |
| Performance - Environmental and Others | ||
| Repeated Insertion and Withdrawal (Contact Resistance) | 40 m MAX | 20 cycles at a speed rate of less than 10 cycles/minute (no power). |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration (Contact Resistance) | 40 m MAX | DC 1mA applied, Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours in each X,Y,Z axes. |
| Vibration (Discontinuity) | 1 ms.MAX. | DC 1mA applied, Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours in each X,Y,Z axes. |
| Shock (Contact Resistance) | 40 m MAX | DC 1mA applied, 490m/s {50G}, 3 strokes in each X,Y,Z axes. |
| Shock (Discontinuity) | 1 ms.MAX. | DC 1mA applied, 490m/s {50G}, 3 strokes in each X,Y,Z axes. |
| Heat Resistance (Contact Resistance) | 40 m MAX | 852 for 96 hours, then returned to room temperature for 1-2 hours. |
| Cold Resistance (Contact Resistance) | 40 m MAX | -402 for 96 hours, then returned to room temperature for 1-2 hours. |
| Humidity (Contact Resistance) | 40 m MAX | 402, 90-95% RH for 96 hours, measured within 0.5 hours after returning to room temperature. |
| Humidity (Insulation Resistance) | 50 M MIN | 402, 90-95% RH for 96 hours, measured within 0.5 hours after returning to room temperature. |
| Humidity (Dielectric Strength) | Must meet 4.1.3 | 402, 90-95% RH for 96 hours, measured within 0.5 hours after returning to room temperature. |
| Temperature Cycling (Contact Resistance) | 40 m MAX | 5 cycles of: -553 for 30 min; room temp. 10-15 min; 852 for 30 min; room temp. 10-15 min. |
| Salt Spray (Contact Resistance) | 40 m MAX | 48 hours exposure to 51% salt spray at 352, followed by washing and drying. |
| SO2 Gas (Contact Resistance) | 40 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas (Contact Resistance) | 40 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability (Solder Wetting) | 95% or more coverage | Immersion in a 2455 tin bath for 20.5 sec, 0.2 mm from terminal tip. |
| Resistance to Soldering Heat (Wave Soldering) (Appearance) | No Damage, Deformation | Withstand wave soldering conditions twice: peak temp 2505 for 5-10s; 80-120C for 8-12s. |
| Packaging, Transportation, Storage | ||
| Packing | PE bag packaging (unless otherwise specified). | |
| Transportation | Any vehicle, but must be moisture-proof and protected from mechanical damage. | |
| Storage | Temperature: -10+40, Relative Humidity: 80%, no corrosive gases. (Note: Section 7.3.1 also states -5+35, 70% RH). Storage duration: 6 months, re-qualification required thereafter. | |
2409272303_JUSHUO-AF125-S20WCC-00_C5380645.pdf
Send RFQ
Stock:
MOQ:
