FPC FFC Connector 125 Volt 1 Amp Rated Current JUSHUO AF125-S16HCC-00 Flexible Flat Cable Connector
Product Overview
This specification covers the 1.25mm Pitch FPC/FFC Connector series, designed for flexible flat cable connections. It offers a rated voltage of 125V and a rated current of 1.0A (AC/DC), operating within an ambient temperature range of -40 to +85. Key features include low contact resistance, high insulation resistance, and robust dielectric strength. The connector is built for mechanical durability, with specified locking and withdrawal forces, as well as terminal retention force. It has undergone rigorous testing for environmental performance, including repeated insertion/withdrawal, temperature rise, vibration, shock, heat resistance, cold resistance, humidity, temperature cycling, salt spray, SO2 gas, and NH3 gas resistance. The product also demonstrates good solderability and resistance to soldering heat, ensuring reliable performance in demanding applications.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Product Name: FPC/FFC Connector
- Part Number: AF125-S**HCC-00
- Housing Material: LCP (Natural or Black, UL 94V-0)
- Contact Material: Phosphor Bronze C5191R-EH
- Contact Plating: Ni Undercoat 40" min, Sn Surface 80120" or Au:0.8"min
Technical Specifications
| Item | Requirement |
|---|---|
| Rated Voltage (MAX) | 125V |
| Rated Current (MAX) | 1.0A [AC(rms)/DC] |
| Ambient Temperature Range | -40 +85 |
| Electrical Performance | |
| Contact Resistance | 30 m MAX (Mate applicable FPC/FFC, dry circuit, 20mV MAX, 10mA) |
| Insulation Resistance | 500 M MIN (Mate applicable FPC/FFC, 500V DC between adjacent terminals or ground) |
| Dielectric Strength | No Breakdown (Mate applicable FPC/FFC, 200V AC (rms) for 1 minute between adjacent terminals or ground) |
| Mechanical Performance | |
| Locking Force | 1.96*n (N) MAX (Insert/extract 0.3mm FFC at 253mm/min) |
| Withdrawal Force | 0.49*n (N) MIN (Insert/extract 0.3mm FFC at 253mm/min) |
| Terminal /Housing Retention Force | 3.92 N MIN (Pull terminal at 253mm/min) |
| Environmental Performance and Others | |
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX (20 cycles at <10 cycles/min) |
| Temperature Rise | 30 MAX (Carrying rated current load, UL 498) |
| Vibration | Discontinuity: 1 ms.MAX. (DC 1mA, Amplitude 1.5mm, Frequency 10-55-10Hz/min, 2 hours each X,Y,Z axes) |
| Shock | Discontinuity: 1 ms.MAX. (DC 1mA, 490m/s{50G}, 3 strokes each X,Y,Z axes) |
| Heat Resistance | Contact Resistance: 60 m MAX; Appearance: No Damage (852, 96 hours) |
| Cold Resistance | Contact Resistance: 60 m MAX; Appearance: No Damage (-402, 96 hours) |
| Humidity | Insulation Resistance: 20 M MIN; Appearance: No Damage (402, 90-95% RH, 96 hours) |
| Temperature Cycling | Contact Resistance: 60 m MAX; Appearance: No Damage, No Corrosion (5 cycles: -553 30min; 852 30min) |
| Salt Spray | Contact Resistance: 60 m MAX (484 hours in 51% salt solution at 352) |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX; Appearance: No Damage (24 hours in 505ppm SO2 at 402) |
| NH3 Gas Resistance | Contact Resistance: 60 m MAX (40 minutes exposure to NH3 gas from 28% Ammonia solution) |
| Solderability | Solder Wetting: 95% or more area (20.5 sec at 2455, 0.2mm from terminal tip) |
| Resistance to Soldering Heat | Appearance: No Damage, No Deformation (50.5 sec at 2605, 0.2mm from terminal tip) |
2409271733_JUSHUO-AF125-S16HCC-00_C22470639.pdf
