FPC FFC Connector 1.25mm Pitch LIF Series Electrical Connector Rated 125V 1.0A JUSHUO AF125-S04WCC-00
Manufacturer:
JUSHUO
Description:
FFC/FPC Connector 4 Position 1.25mm Pitch Top Contact Through Hole, Right Angle
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-40℃~+85℃
Locking Feature:
无锁
Number Of Contacts:
4P
Pitch:
1.25mm
Current Rating:
1A
Voltage Rating (Max):
125V
Contact Type:
上接
Mounting Type:
弯插
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
AF125-S04WCC-00
Package:
Through Hole,Right Angle,P=1.25mm
Model Number:
AF125-S04WCC-00
Introduction
Product Overview
This specification covers the 1.25mm Pitch FPC/FFC Connectors, LIF series, designed for applications requiring a 0.3mm thick FFC with 1.25mm pitch. These connectors are rated for a maximum voltage of 125V (AC/DC) and a maximum current of 1.0A, with an operating temperature range of -40 to +85. They are suitable for various environmental conditions and mechanical stresses, ensuring reliable electrical connections.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: Shenzhen, China
- Product Name: 1.25mm Pitch FPC/FFC Connectors
- Series: LIF
- Housing Material: LCP ( or UL 94V-0)
- Contact Material: Phosphor Bronze C5191R-EH
- Contact Plating: Ni Base 40u min, Sn Surface 80120u or Au:0.8umin
Technical Specifications
| Item | Specification | Requirement |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 125V [AC(rms)/DC] | - |
| Rated Current (MAX) | 1.0A | - |
| Ambient Temperature Range | -40+85 | - |
| Performance - Electrical | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. | 500M MIN |
| Dielectric Strength (rms) | Mate applicable FPC/FFC and apply 200V AC (rms) for 1 minute between adjacent terminals or ground. | No Breakdown |
| Performance - Mechanical | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (FFC thickness: 0.3mm) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute. | 5.9 N MIN |
| Performance - Environmental and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal up to 20 cycles at a speed rate of less than 10 cycles/minute. | Contact Resistance: 40 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | DC 1mA energized; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X, Y, Z axes. | Appearance: No Damage Contact Resistance: 40 m MAX Discontinuity: 1 ms.MAX. |
| Shock | DC 1mA energized; 490m/s {50G}, 3 strokes in each X, Y, Z axes. | Appearance: No Damage Discontinuity: 1 ms.MAX. |
| Heat Resistance | Mate applicable FPC/FFC; Place in 852 air for 96 hours, then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 40 m MAX |
| Cold Resistance | Mate applicable FPC/FFC; Place in -402 air for 96 hours, then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 40 m MAX |
| Humidity | Mate applicable FPC/FFC; Place in 402, 90-95% RH air for 96 hours, then measure within 0.5 hours at room temperature. | Appearance: No Damage Contact Resistance: 40 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 50 M MIN |
| Temperature Cycling | 5 cycles of: a) -553 for 30 minutes; b) 852 for 30 minutes. Return to room temp for 10-15 minutes between cycles. | Appearance: No Damage Contact Resistance: 40 m MAX |
| Salt Spray | Mate applicable FPC/FFC; 48 hours exposure to a salt spray from a 51% solution at 352. Wash with room temp water and dry. | Appearance: No Damage, Corrosion Contact Resistance: 40 m MAX |
| SO2 Gas Resistance | Mate applicable FPC/FFC; 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 40 m MAX |
| NH3 Gas Resistance | Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage Contact Resistance: 40 m MAX |
| Solderability | Soldering Time: 20.5 sec; Soldering Temperature: 2455; 0.2 mm from terminal tip. | Solder Wetting: 95% or more coverage |
| Resistance to Soldering Heat (Wave Soldering) | Parts shall withstand the following wave soldering conditions twice: total cycle time 6 min; peak temperature 250 5 for 5~10s; temperature 80-120 for 8~12s; air and/or nitrogen atmosphere. See temperature profile in [7]. | Appearance: No Damage, Deformation |
| Product Shape, Dimensions and Materials | ||
| Refer to drawing | - | - |
| Packaging, Transportation, Storage | ||
| Packing | Unless otherwise specified, this series connectors with PE bag packaging. | - |
| Transportation | Any vehicle can be adopted for transportation, but moisture-proof and no mechanical damage. | - |
| Storage (Warehouse Conditions) | Temperature: -10+40; Relative humidity: 80%; free from corrosive gases. | - |
| Storage Duration | 6 months. Re-qualification test required if storage duration exceeds 6 months. | - |
2409272303_JUSHUO-AF125-S04WCC-00_C5380642.pdf
Send RFQ
Stock:
MOQ:
