Locking mechanism FFC connector JUSHUO AFC01-S16FCA-00 0.5mm pitch for stable electrical connections
Manufacturer:
JUSHUO
Description:
FFC/FPC Connector 16 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-45℃~+85℃
Locking Feature:
翻盖式
Number Of Contacts:
16P
Pitch:
0.5mm
Current Rating:
500mA
Voltage Rating (Max):
50V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
铜合金
Mfr. Part #:
AFC01-S16FCA-00
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
AFC01-S16FCA-00
Introduction
Product Overview
The AFC01-S**FCA-00 is a 0.5mm pitch FFC/FFC connector with a locking mechanism, designed for reliable electrical connections. It is suitable for applications requiring a secure and stable connection between flexible flat cables and printed circuit boards. This connector series is manufactured by Shenzhen Jushuo Electronics Co., Ltd.
Product Attributes
- Brand: Jushuo
- Origin: Shenzhen, China
- Product Type: FFC/FPC Connector (Locking Type)
- Material (Main Body): LCP (Natural) UL 94V-0
- Material (Housing Lock): LCP (Black) UL 94V-0
- Material (Terminal/Contact): Phosphor Bronze
- Plating: Metal surface Gold Plated/Tinning
Technical Specifications
| Item | Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | 0.5A (AC/DC Virtual Value, 50Hz) | |
| Ambient Temperature Range | -45 +85 | |
| Electrical Performance | ||
| Contact Resistance | 20 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminals or ground. |
| Mechanical Performance | ||
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC at the speed rate of 253mm/minute (0.3mm thickness FFC). |
| Withdrawal Force | 0.49*n (N) MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute (0.3mm thickness FFC). |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal at the speed rate of 253mm/minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at a speed rate of less than 10 cycles/minute (no power). |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) |
| Vibration | Discontinuity: 1 ms MAX. Appearance: No Damage. | DC 1mA energized state; vibration along X, Y, Z axes; amplitude 1.5mm; frequency 10-55-10Hz/min; duration 2 hours. |
| Shock | Discontinuity: 1 ms MAX. Appearance: No Damage. | DC 1mA energized state; 490m/s {50G} shock in 6 mutually perpendicular directions, 3 times each. |
| Heat Resistance | Contact Resistance: 60 m MAX. Appearance: No Damage. | Mate applicable FPC/FFC; placed in 852 air for 96 hours; then returned to room temperature for 1-2 hours. |
| Cold Resistance | Contact Resistance: 60 m MAX. Appearance: No Damage. | Mate applicable FPC/FFC; placed in -402 air for 96 hours; then returned to room temperature for 1-2 hours. |
| Humidity | Insulation Resistance: 20 M MIN. Appearance: No Damage. | Mate applicable FPC/FFC; placed in 402, 90-95% RH air for 96 hours; measured within 0.5 hours after returning to room temperature. |
| Temperature Cycling | Contact Resistance: 60 m MAX. Appearance: No Damage, corrosion. | 5 cycles of: 30 minutes at -452, 10-15 minutes at room temp; 30 minutes at 852, 10-15 minutes at room temp. |
| Salt Spray | Contact Resistance: 60 m MAX. Appearance: No Damage. | 484 hours exposure to a salt spray from a 51% solution at 352. Washed with room temp water after test and dried at room temp. |
| SO2 Gas | Contact Resistance: 60 m MAX. Appearance: No Damage. | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas | Contact Resistance: 60 m MAX. Appearance: No Damage. | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting: 95% coverage area. | Terminal tip immersed in a 2355 tin bath for 20.5 sec, 0.2mm from the terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, deformation. | Terminal tip immersed in a 2605 tin bath for 50.5 sec, 0.2mm from the terminal tip. |
Part Number: AFC01-S**FCA-00
Company Website: http://www.jushuo.net.cn
2508261745_JUSHUO-AFC01-S16FCA-00_C262665.pdf
Send RFQ
Stock:
MOQ:
