1.25mm Pitch FPC FFC Connector JUSHUO AF125-S10WCC-00 Suitable For Electronics Requiring Connections
Manufacturer:
JUSHUO
Description:
FFC/FPC Connector 10 Position 1.25mm Pitch Top Contact Through Hole, Right Angle
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-40℃~+85℃
Locking Feature:
无锁
Number Of Contacts:
10P
Pitch:
1.25mm
Current Rating:
1A
Voltage Rating (Max):
125V
Contact Type:
上接
Mounting Type:
弯插
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
AF125-S10WCC-00
Package:
Through Hole,Right Angle,P=1.25mm
Model Number:
AF125-S10WCC-00
Introduction
Product Overview
This specification covers the 1.25mm Pitch FPC/FFC Connectors, LIF series, designed for applications requiring a 1.25mm pitch with FPC/FFC thickness of 0.3+/-0.03mm. These connectors are rated for a maximum voltage of 125V [AC(rms)/DC] and a maximum current of 1.0A, operating within an ambient temperature range of -40 to +85. They are suitable for various environmental conditions, exhibiting good performance in terms of contact resistance, insulation resistance, dielectric strength, mechanical forces, and resistance to vibration, shock, heat, cold, humidity, and temperature cycling.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: Shenzhen, China
- Housing Material: LCP ( or UL 94V-0)
- Contact Material: Phosphor Bronze C5191R-EH
- Contact Plating: Ni base 40u" min, Sn surface 80120u" or Au:0.8u"min
Technical Specifications
| Item | Specification/Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 125V [AC(rms)/DC] | |
| Rated Current (MAX) | 1.0A | |
| Ambient Temperature Range | -40+85 | |
| Performance | ||
| Electrical Performance | Contact Resistance | 30 m MAX (Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA) |
| Insulation Resistance | 500M MIN (Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground) | |
| Dielectric Strength (rms) | No Breakdown | Apply 200V AC (rms) for 1 minute between adjacent terminal or ground |
| Mechanical Performance | Locking Force | 1.96*n (N) MAX (Insert and extract applicable FFC at the speed rate of 253mm/minute) |
| Withdrawal Force | 0.49*n (N) MIN (Insert and extract applicable FFC at the speed rate of 253mm/minute) | |
| Terminal / Housing Retention Force | 5.9 N MIN (Pull the terminal at the speed rate of 25 3mm per minute) | |
| Environmental Performance and Others | Contact Resistance (Repeated Insertion/Withdrawal) | 40 m MAX (Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute) |
| Temperature Rise | 30 MAX (Carrying rated current load. UL 498) | |
| Vibration | Appearance: No Damage; Contact Resistance: 40 m MAX; Discontinuity: 1 ms.MAX. (DC 1mA under vibration: Amplitude 1.5mm, Frequency 10-55-10Hz/min, Duration 2 hours in each X,Y,Z axes) | |
| Shock | Appearance: No Damage; Discontinuity: 1 ms.MAX. (490m/s{50G}, 3 strokes in each X,Y,Z axes) | |
| Contact Resistance | 40 m MAX (490m/s{50G}, 3 strokes in each X,Y,Z axes) | |
| Heat Resistance | Appearance: No Damage; Contact Resistance: 40 m MAX (852 for 96 hours) | |
| Dielectric Strength | Must meet 4.1.3 (852 for 96 hours) | |
| Cold Resistance | Appearance: No Damage; Contact Resistance: 40 m MAX (-402 for 96 hours) | |
| Insulation Resistance | 50 M MIN (-402 for 96 hours) | |
| Humidity | Appearance: No Damage; Contact Resistance: 40 m MAX (402, 90-95% RH for 96 hours) | |
| Dielectric Strength: Must meet 4.1.3; Insulation Resistance: 50 M MIN (402, 90-95% RH for 96 hours) | ||
| Temperature Cycling | Appearance: No Damage; Contact Resistance: 40 m MAX (5 cycles of -553 for 30 min and 852 for 30 min) | |
| Solderability | Solder Wetting: 95% area (Immersion in 2455 tin bath for 20.5 sec at 0.2mm from terminal tip) | |
| Resistance to Soldering Heat (Wave Soldering) | Appearance: No Damage, Deformation (Withstand wave soldering conditions twice: peak temp 2505 for 5-10s) | |
| Salt Spray | Appearance: No Damage, Corrosion; Contact Resistance: 40 m MAX (48 hours exposure to 51% salt spray at 352) | |
| SO2 Gas Resistance | Contact Resistance: 40 m MAX (24 hours exposure to 505ppm SO2 gas at 402) | |
| NH3 Gas Resistance | Appearance: No Damage; Contact Resistance: 40 m MAX (40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution) | |
| Storage Conditions (after opening humidity prevention packing) | ||
| Temperature | -5+35 | |
| Humidity | 70% RH Max. | |
2409272303_JUSHUO-AF125-S10WCC-00_C7529563.pdf
Send RFQ
Stock:
MOQ:
